EN 636:2012/FprA1

Plywood - Specifications

This European Standard specifies the requirements for plywood, as defined in EN 313 2, for both general purpose use (non-structural application) and structural application in dry, humid or exterior conditions. It also gives a classification system based on the bending properties.
NOTE 1   This European Standard is referenced in EN 13986 for construction applications.
This standard can be appropriately applied for all plywood, including overlaid and coated plywood, but it does not cover materials or processes used for overlaying or coating. Neither does it cover any materials or processes applied in relation to enhancement of biological durability.
NOTE 2   For additional guidance on biological durability and the potential need for preservative treatment, according to application and serviceability, reference can be made to CEN/TS 1099.
The values listed under Clause 4 relate only to product properties; they are not 'characteristic values' and are not to be used in design calculations.
NOTE 3   Characteristic values (i.e. for use in design calculation according to EN 1995–1-1) are given either in EN 12369–2 which is based on the classification system given in this standard or by the manufacturer based on testing according to EN 789, EN 1058 and ENV 1156.
Additional information on supplementary properties for certain applications is also given.

Sperrholz - Anforderungen

Contreplaqué - Exigences

Vezane plošče - Specifikacije

General Information

• Status: Not Published
• ICS: 79.060.10 - Plywood
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 2 - Plywood
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 26-Nov-2014
• Due Date: 28-Sep-2015
• Completion Date: 26-Nov-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
• Ref Project: SIST EN 636:2013/kFprA1:2014 - Plywood - Specifications

Relations

• Merged Into: EN 636:2012+A1:2015 - Plywood - Specifications
• Effective Date: 19-Jan-2023
• Amends: EN 636:2012 - Plywood - Specifications
• Effective Date: 22-Jan-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 636:2013/kFprA1:2014
01-september-2014
9H]DQHSORãþH6SHFLILNDFLMH
Plywood - Specifications
Sperrholz - Anforderungen
Contreplaqué - Exigences
Ta slovenski standard je istoveten z: EN 636:2012/FprA1
ICS:
79.060.10 Vezan les Plywood
SIST EN 636:2013/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 636:2013/kFprA1:2014

---------------------- Page: 2 ----------------------

SIST EN 636:2013/kFprA1:2014

EUROPEAN STANDARD
FINAL DRAFT
EN 636:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
June 2014
ICS 79.060.10
English Version
Plywood - Specifications
Contreplaqué - Exigences Sperrholz - Anforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 112.

This draft amendment A1, if approved, will modify the European Standard EN 636:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 636:2012/FprA1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 636:2013/kFprA1:2014
EN 636:2012/FprA1:2014 (E)
Contents Page
Foreword .3
1 Modification to Clause 1, Scope .4
2 Modification in 12.1, Boards marketed within the European Economic area for
construction applications .4
3 Modification in 12.2, Other boards .4
4 Add a New Annex B (informative), Durability of wood and wood-based products -
Definition of Use classes of biological attack- Application to plywood .4
Annex A (normative) Supplementary properties .5
Annex B (informative) Durability of wood and wood-based products - Definition of Use classes
of biological attack- Application to plywood .6
B.1 Scope .6
B.2 General .6
B.3 Use class1 .6
B.4 Use class 2 .6
B.5 Use class 3 .7
B.6 Use class 4 .
...