iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10062:2022/prA1

(Amendment)

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) - Amendment 1: Footnote of warning (ISO 10062:2022/DAM 1:2023)

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) - Amendment 1: Footnote of warning (ISO 10062:2022/DAM 1:2023)

Korrosionsprüfungen in künstlicher Atmosphäre mit sehr niedrigen Konzentrationen von Schadgas(en) - Änderung 1: Warnfußnote (ISO 10062:2022/DAM 1:2023)

Essais de corrosion en atmosphère artificielle à très faible concentration en gaz polluants - Amendement 1: Note de bas de page relative à l'Avertissemen (ISO 10062:2022/DAM 1:2023)

Korozijski preskusi v umetni atmosferi pri zelo majhnih koncentracijah škodljivih plinov - Dopolnilo A1: Opozorilo v opombi (ISO 10062:2022/DAM 1:2023)

General Information

Status
Not Published
Publication Date
04-May-2025
ICS
77.060 - Corrosion of metals
Technical Committee
CEN/TC 262 - Metallic and other inorganic coatings
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
02-Jan-2024
Completion Date
02-Jan-2024
Ref Project
SIST EN ISO 10062:2023/oprA1:2023 - Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) - Amendment 1: Footnote of warning (ISO 10062:2022/DAM 1:2023)

Relations

Amends
EN ISO 10062:2022 - Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
Effective Date
28-Jun-2023

Buy Standard

EN ISO 10062:2023/oprA1:2023EN ISO 10062:2023/oprA1:2023
PreviousNext
Draft
EN ISO 10062:2023/oprA1:2023
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10062:2023/oprA1:2023
01-december-2023
Korozijski preskusi v umetni atmosferi pri zelo majhnih koncentracijah škodljivih
plinov - Dopolnilo A1: Opozorilo v opombi (ISO 10062:2022/DAM 1:2023)
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) -
Amendment 1: Footnote of warning (ISO 10062:2022/DAM 1:2023)
Korrosionsprüfungen in künstlicher Atmosphäre mit sehr niedrigen Konzentrationen von
Schadgas(en) - Änderung 1: Warnfußnote (ISO 10062:2022/DAM 1:2023)
Essais de corrosion en atmosphère artificielle à très faible concentration en gaz
polluants - Amendement 1: Note de bas de page relative à l'Avertissemen (ISO
10062:2022/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 10062:2022/prA1
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 10062:2023/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10062:2023/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 10062:2023/oprA1:2023
DRAFT AMENDMENT
ISO 10062:2022/DAM 1
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:
2023-10-10 2024-01-02
Corrosion tests in artificial atmosphere at very low
concentrations of polluting gas(es)
AMENDMENT 1: Footnote of warning
ICS: 77.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 10062:2022/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 10062:2023/oprA1:2023
ISO 10062:2022/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 10062:2022/DAM 1
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:

Corrosion tests in artificial atmosphere at very low
concentrations of polluting gas(es)
AMENDMENT 1: Footnote of warning
ICS: 77.060
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10062:2022(Main)
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
SIST EN ISO 10062:2023

This document specifies tests which are intended to determine the influence of one or more flowing polluting gas(es) at volume fractions less than or equal to 10−6 on test samples and/or articles of metals and alloys with or without corrosion protection under determined conditions of temperature and relative humidity.
This document is applicable to
a) metals and their alloys,
b) metallic coatings (anodic and cathodic),
c) metals with conversion coatings,
d) metals with anodic oxide coatings, and
e) metals with organic coatings.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9227:2022(Main)
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
SIST EN ISO 9227:2023

This document specifies the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection.
It also describes the method employed to evaluate the corrosivity of the test cabinet environment.
It does not specify the dimensions or types of test specimens, the exposure period to be used for a particular product, or the interpretation of results. Such details are provided in the appropriate product specifications.
The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects, in certain metallic, organic, anodic oxide and conversion coatings.
The NSS test is particularly applicable to:
—    metals and their alloys;
—    metallic coatings (anodic and cathodic);
—    conversion coatings;
—    anodic oxide coatings;
—    organic coatings on metallic materials.
The AASS test is especially useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The CASS test is useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The salt spray methods are all suitable for checking that the quality of a metallic material, with or without corrosion protection, is maintained. They are not intended to be used for comparative testing as a means of ranking different materials relative to each other with respect to corrosion resistance or as means of predicting long-term corrosion resistance of the tested material.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21207:2022(Main)
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
SIST EN ISO 21207:2022

ISO 21207:2015 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of corrosion-promoting gases from industrial or traffic air pollution.
ISO 21207:2015 specifies both the test apparatus and test procedures to be used in executing the accelerated corrosion tests.
The methods are especially suitable for assessing the corrosion resistance of sensitive products with metals, e.g. electronic components, used in traffic and industrial environments.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16539:2022(Main)
Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013)
SIST EN ISO 16539:2022

This International Standard specifies two accelerated corrosion test procedures, Methods A and B, for the evaluation of corrosion behaviour of surface-treated metals and their alloys with and without paint on them in atmospheric environments. It also specifies the apparatus used. The two tests involve salt deposition and dry/wet conditions at a constant absolute humidity.
Method A applies to:
metals and their alloys (including corrosion-resistance alloys)
Method B applies to:
metals and their alloys
metals and their alloys with coatings [including metallic coatings (anodic or cathodic), organic
coatings, and conversion coatings]

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22479:2022(Main)
Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
SIST EN ISO 22479:2022

This document specifies a method for assessing the resistance of materials or products to a humid atmosphere containing sulfur dioxide.
This method is applicable to testing metals and alloys, metallic and non-organic coatings and organic coatings.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10270:2022(Main)
Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
SIST EN ISO 10270:2022

This document specifies:
a) the determination of mass gain;
b) the surface inspection of products of zirconium and its alloys when corrosion is tested in water at 360 °C or in steam at or above 400 °C;
c) the performance of tests in steam at 10,3 MPa.
This document is applicable to wrought products, castings, powder metallurgy products and weld metals.
This method has been widely used in the development of new alloys, heat-treating practices and for the evaluation of welding techniques. It is applicable for use in its entirety to the extent specified for a product acceptance test, rather than merely a means of assessing performance in service.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7539-9:2021(Main)
Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2021)
SIST EN ISO 7539-9:2021

1.1  This document specifies procedures for designing, preparing and using pre-cracked specimens for investigating the susceptibility of metal to stress corrosion cracking (SCC) by means of tests conducted under rising load or rising displacement. Tests conducted under constant load or constant displacement are dealt with in ISO 7539-6.
The term “metal” as used in this document includes alloys.
1.2  Because of the need to confine plasticity at the crack tip, pre-cracked specimens are not suitable for the evaluation of thin products such as sheet or wire and are generally used for thicker products including plate, bar, and forgings. They can also be used for parts joined by welding.
1.3  Pre-cracked specimens can be stressed quantitatively with equipment for application of a monotonically increasing load or displacement at the loading points.
1.4  A particular advantage of pre-cracked specimens is that they allow data to be acquired from which critical defect sizes, above which stress corrosion cracking can occur, can be estimated for components of known geometry subjected to known stresses. They also enable rates of stress corrosion crack propagation to be determined.
1.5  A principal advantage of the test is that it takes account of the potential impact of dynamic straining on the threshold for stress corrosion cracking.
1.6  At sufficiently low loading rates, the threshold stress intensity factor for susceptibility to stress corrosion cracking, KISCC, determined by this method can be less than or equal to that obtained by constant load or displacement methods and can be determined more rapidly.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8407:2021(Main)
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
SIST EN ISO 8407:2021

This document specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this document, the term "metals" refers to pure metals and alloys.
The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environment.
In some cases, these procedures are also applicable to metal coatings, providing the possible effects from the substrate are considered.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11463:2020(Main)
Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
SIST EN ISO 11463:2020

This document gives guidelines for the selection of procedures that can be used in the identification and examination of corrosion pits and in the evaluation of pitting corrosion and pit growth rate.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11844-2:2020(Main)
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)
SIST EN ISO 11844-2:2020

This document specifies methods for determining corrosion rates with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation corrosivity, different sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc, steel and lead. The values obtained from the measurements are used as classification criteria for the determination of indoor atmospheric corrosivity.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day