prEN 1930

Child care articles - Safety barriers - Safety requirements and test methods

This document specifies the safety requirements and test methods for child safety barriers for domestic indoor use which are designed to be fitted across openings to limit a child's access inside the home and to prevent young children up to 24 months of age passing through.
This document does not apply to products designed to be fitted across windows.
If the safety barrier has other functions not covered in this document, reference should be made to the relevant European standard.

Artikel für Säuglinge und Kleinkinder - Kinderschutzgitter - Sicherheitstechnische Anforderungen und Prüfverfahren

Dieses Dokument legt die sicherheitstechnischen Anforderungen und die Prüfverfahren für Kinderschutz-gitter zur Verwendung im Wohnbereich fest; diese sind an Öffnungen so zu befestigen, dass die Zugangs-möglichkeiten eines Kindes innerhalb des Hauses eingeschränkt sind, um so Kinder im Alter bis 24 Monaten am Durchgang zu hindern.
Dieses Dokument gilt nicht für Produkte, die an Fenstern zu befestigen sind.
Verfügt das Kinderschutzgitter über weitere Funktionen, die nicht in dieser Europäischen Norm behandelt werden, sollte auf die einschlägige Europäische Norm verwiesen werden.

Articles de puériculture - Barrières de sécurité - Exigences de sécurité et méthodes d'essai

Le présent document spécifie les exigences de sécurité et les méthodes d’essai applicables aux barrières de sécurité pour enfants, à usage domestique intérieur, destinées à être montées en travers des ouvertures afin de restreindre l’accès des enfants à certaines zones à l’intérieur du domicile et d’empêcher le passage aux enfants de moins de 24 mois.
Le présent document ne s’applique pas aux produits destinés à être montés en travers des fenêtres.
Si la barrière de sécurité remplit d’autres fonctions que celles couvertes par la présente Norme européenne, il convient se référer à la Norme européenne applicable.

Izdelki za otroke - Varnostne pregrade - Varnostne zahteve in preskusne metode

General Information

• Status: Not Published
• Publication Date: 14-Apr-2021
• ICS: 97.190 - Equipment for children
• Technical Committee: CEN/TC 252 - Child use and care articles
• Drafting Committee: CEN/TC 252/WG 4 - Early learning and protection
• Current Stage: 3098 - Decision to reject - Consensus building
• Completion Date: 29-Mar-2021
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/264 - Mandate to CEN and CENELEC in the field of consumer safety related to the safety of child-care articles
• Ref Project: oSIST prEN 1930:2019 - Child use and care articles - Safety barriers - Safety requirements and test methods

Relations

• Revises: EN 1930:2011 - Child use and care articles - Safety barriers - Safety requirements and test methods
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2019
Izdelki za otroke - Varnostne pregrade - Varnostne zahteve in preskusne metode
Child use and care articles - Safety barriers - Safety requirements and test methods
Artikel für Säuglinge und Kleinkinder - Kinderschutzgitter - Sicherheitstechnische
Anforderungen und Prüfverfahren
Articles de puériculture - Barrières de sécurité - Exigences de sécurité et méthodes
d'essai
Ta slovenski standard je istoveten z: prEN 1930
ICS:
97.190 Otroška oprema Equipment for children
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2019
ICS 97.190 Will supersede EN 1930:2011
English Version
Child use and care articles - Safety barriers - Safety
requirements and test methods
Articles de puériculture - Barrières de sécurité - Artikel für Säuglinge und Kleinkinder -
Exigences de sécurité et méthodes d'essai Kinderschutzgitter - Sicherheitstechnische
Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 252.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1930:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test equipment . 6
4.1 Tolerances for test equipment . 6
4.2 Hip probe . 6
4.3 Foothold template . 7
4.4 Finger probes . 8
4.4.1 Test probes with hemispherical end . 8
4.4.2 Probe for mesh . 8
4.4.3 Shape assessment probe . 8
4.5 Ball chain loop and spherical mass . 9
4.6 Feeler gauge . 10
4.7 Small parts cylinder . 11
4.8 Test frame . 11
4.9 Rattle test equipment . 12
4.10 Push–pull test equipment . 13
4.11 Test impactor . 16
5 Chemical hazards . 18
5.1 General. 18
5.2 Migration of certain elements . 18
6 Conditioning . 18
7 Mechanical hazards . 19
7.1 General. 19
7.2 Protective function . 19
7.2.1 Protective height requirements . 19
7.2.2 Test methods . 19
7.3 Gaps . 24
7.3.1 Requirements . 24
7.3.2 Test method . 24
7.4 Opening and closing system . 25
7.4.1 Requirements . 25
7.4.2 Test methods . 25
7.5 Entrapment hazards . 25
7.5.1 Requirements for openings – finger entrapment . 25
7.5.2 Test method . 26
7.6 Shearing and crushing hazards. 26
7.6.1 Requirements . 26
7.6.2 Test method . 26
7.7 Protrusion hazards . 26
7.7.1 Requirements . 26
7.7.2 Test method . 26
7.8 Choking and ingestion hazards . 27
7.8.1 Requirements . 27
7.8.2 Test methods . 27
7.9 Suffocation hazards . 28
7.10 Hazardous edges and points . 28
7.10.1 General . 28
7.10.2 Requirements for edges on tubes . 28
7.10.3 Requirements for points . 28
7.11 Structural integrity . 29
7.11.1 Materials . 29
7.11.2 Effectiveness of the fixing, locking devices and opening systems . 29
7.12 Security of the safety barrier from impact . 30
7.12.1 Requirements . 30
7.12.2 Test method . 30
8 Thermal hazards for safety barriers with fabric components . 31
8.1 Requirements . 31
8.2 Test method . 31
9 Additional hazards . 31
9.1 Use of a tool . 31
9.2 Toys . 31
10 Product information . 32
10.1 General . 32
10.2 Marking requirements . 32
10.3 Purchase information . 32
10.4 Instructions for use . 33
10.4.1 General . 33
10.4.2 Warnings . 33
Annex A (informative) Rationales . 35
A.1 General .
...