Child use and care articles - Soother holder - Safety requirements and test methods

This European Standard specifies safety requirements relating to the materials, construction, performance, packaging and labelling of soother holders (see B.1).
It includes test methods for the mechanical and chemical requirements specified.
All products that are intended to be used by a child to connect a soother with any other product are included in the scope of this European Standard.
This European Standard is intended to provide safety requirements for soother holders which are generally comprised of a strap with the holder at one end which retains the soother whilst the other end has a clasp that attaches to the child’s garment.
Where a soother holder has been classified as a toy or considered to have significant play value then the soother holder will have to meet the essential safety requirements for toys as stated in the Toy Directive (88/378/EEC) in addition to those in this European Standard. The addition of decorations or providing animal shaped fasteners should not automatically make the soother holder a toy; however the addition of a toy component to the soother holder will require that both the soother holder and the toy meet the essential safety requirements as stated in the Toy Directive. Where there is doubt concerning classification of a soother holder as a toy then advice should be sought from an EU Toy Notified Body or the Member State’s Competent Authority for toys (see B.2).

Artikel für Säuglinge und Kleinkinder - Schnullerhalter - Sicherheitstechnische Anforderungen und Prüfverfahren

In dieser Europäischen Norm werden Sicherheitsanforderungen an Werkstoffe, Bau, Ausführung, Verpackung
und Kennzeichnung von Schnullerhaltern festgelegt.
Sie enthält Prüfverfahren für die festgelegten mechanischen und chemischen Anforderungen.
Sämtliche Produkte, die dafür bestimmt sind, beim Kind den Schnuller mit einem anderen Produkt zu
verbinden, sind im Anwendungsbereich dieser Norm erfasst.
Es gibt einige Produkte, die für mehr als einen Zweck vorgesehen sind, z. B. könnte ein Schnullerhalter eine
Rassel oder ein Weichspielzeug aufnehmen. Andererseits könnte die Verbindungsschnur eine Kordel mit
dekorativ gefärbten Perlen haben. Jedes dieser Produkte sollte den Anforderungen der vorliegenden Norm
entsprechen. Sofern diese Produkte auch Spielzeug sind, sollte das Gesamtprodukt zusätzlich den
entsprechenden Anforderungen der EN 71 entsprechen.

Articles de puériculture - Attache sucette - Exigences de sécurité et méthodes d'essai

La présente Norme européenne spécifie les exigences de sécurité relatives aux matériaux, à la fabrication, aux performances, à l'emballage et à l'étiquetage des attache sucettes.
Elle comprend des méthodes d'essai portant sur les exigences mécaniques et chimiques spécifiées.
Tous les produits destinés à être utilisés pour fixer une sucette à un autre produit entrent dans le cadre de la présente norme.
Certains produits ont plusieurs fonctions, par exemple, une attache sucette peut intégrer un hochet ou un jouet souple. Le lien peut également être assorti d'un rang de perles décoratives de couleur. Il convient que tous ces produits soient conformes aux exigences de la présente norme. Cependant, comme ces produits sont également des jouets, il convient que l'ensemble du produit satisfasse, en outre, aux exigences correspondantes de l'EN 71.

Izdelki za otroke - Držalo dude - Varnostne zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
09-Oct-2007
Withdrawal Date
11-Jan-2011
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Jan-2011
Completion Date
12-Jan-2011

Relations

Buy Standard

Standard
EN 12586:2008
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Child use and care articles - Soother holder - Safety requirements and test methodsIzdelki za otroke - Držalo dude - Varnostne zahteve in preskusne metodeArticles de puériculture - Attache sucette - Exigences de sécurité et méthodes d'essaiArtikel für Säuglinge und Kleinkinder - Schnullerhalter - Sicherheitstechnische Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 12586:2007SIST EN 12586:2008en,fr,de97.190Otroška opremaEquipment for childrenICS:SIST EN 12586:2002/AC:2003SIST EN 12586:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 12586:200801-januar-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12586October 2007ICS 97.190Supersedes EN 12586:1999
English VersionChild use and care articles - Soother holder - Safetyrequirements and test methodsArticles de puériculture - Attache sucette - Exigences desécurité et méthodes d'essaiArtikel für Säuglinge und Kleinkinder - Schnullerhalter -Sicherheitstechnische Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 20 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12586:2007: E

Warnings.39 Annex B (informative)
Rationale.42 Annex C (informative)
Suitable method for the determination of phthalate plasticisers.47 Bibliography.51

(ISO 105-A03:1993) EN ISO 105-E01, Textiles — Test for colour fastness — Part E01: Colour fastness to water
(ISO 105-E01:1994) EN ISO 105-E04, Textiles — Test for colour fastness — Part E04: Colour fastness to perspiration
(ISO 105-E04:1994) EN ISO 291, Plastics — Standard atmospheres for conditioning and testing (ISO 291:2005) EN ISO 14184-1, Textiles — Determination of formaldehyde — Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998)

3.4 soother fastener device for securing the soother holder to the soother 3.5 strap connecting device between a garment fastener and the soother fastener 3.6 touch-and-close device device having fibre interlocking faces, which are secured when pressed together 3.7 clothing fastener device part of the garment fastener that attaches it to the clothing 3.8 press stud device with two parts that engage when pressed together 3.9 ventilation hole (see B.11) hole of any shape that includes a circular area of at least 4 mm diameter 3.10 supplementary component part attached to the soother holder other than fasteners, press studs or touch-and-close devices 3.11 cord (see B.9) piece of slender, flexible material including monofilaments, woven and twisted cord, rope, plastic textile tapes, ribbons and fibrous materials commonly called string 4 Description of a soother holder A soother holder may consist of:  garment fastener;  strap;

Key 1 garment fastener 2 strap 3 soother fastener attached to ring of soother 4 touch-and-close device 5 press stud 6 ventilation hole 7 soother fastener attached to knob of soother Figure 1 — Examples of soother holders assembled with soothers

Key 1 garment fastener 2 strap 3 clothing fastener device 4 soother fastener 5 ventilation hole Figure 2 — Examples of soother holders

Key 1 detachable supplementary component
2 supplementary components in the form of beads 3 soother fastener in the form of a loop of cord 4 permanently attached supplementary component
Figure 3 — Examples of soother holders with supplementary components
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.