Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

1.1 The scope of prEN 378-1:1999 is applicable. 1.2 This Part 4 of the European Standard specifies requirements for safety and environmental aspects in relation to operation, maintenance, repair of refrigerating systems and the recovery, reuse and disposal of all types of refrigerant. 1.3 These requirements are intended to minimize risks of injury to persons and damage to property and the environment resulting from improper handling of the refrigerant or from contaminants leading to system breakdown and resultant emission of the refrigerant.

Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 4: Betrieb, Instandhaltung, Instandsetzung und Rückgewinnung

1.1 Es gilt der Anwendungsbereich von prEN 378-1:1999. 1.2 Dieser Teil 4 der Europäischen Norm legt Anforderungen zu den sicherheitstechnischen und umweltrelevanten Aspekten bei Betrieb, Instandhaltung und Instandsetzung von Kälteanlagen und bei der Rückgewinnung, Wiederverwendung und Entsorgung aller Arten von Kältemitteln fest.

Systèmes de réfrigération et pompes à chaleur - Exigences de sécurité et d'envionnement - Partie 4 : Fonctionnement, maintenance, réparation et récupération

1.1 Le domaine d'application du prEN 378-1:1999 est applicable. 1.2 Cette Partie 4 de la norme européenne spécifie les exigences en matière de sécurité et d'environnement relatives au fonctionnement, à l'entretien, à la réparation des systèmes de réfrigération et à la récupération, réutilisation et mise à disposition de tous les type de fluides frigorigènes.

Hladilni sistemi in toplotne črpalke – Varnostnotehnične in okoljevarstvene zahteve – 4. del: Delovanje, vzdrževanje, popravilo in recikliranje

General Information

Status
Withdrawn
Publication Date
09-Dec-2003
Withdrawal Date
19-Feb-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Feb-2008
Completion Date
20-Feb-2008

Relations

Buy Standard

Amendment
EN 378-4:2000/A1:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 378-4:2000/A1:2004
01-september-2004
+ODGLOQLVLVWHPLLQWRSORWQHþUSDONH±9DUQRVWQRWHKQLþQHLQRNROMHYDUVWYHQH
]DKWHYH±GHO'HORYDQMHY]GUåHYDQMHSRSUDYLORLQUHFLNOLUDQMH
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4:
Operation, maintenance, repair and recovery
Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante
Anforderungen - Teil 4: Betrieb, Instandhaltung, Instandsetzung und Rückgewinnung
Systemes de réfrigération et pompes a chaleur - Exigences de sécurité et
d'envionnement - Partie 4 : Fonctionnement, maintenance, réparation et récupération
Ta slovenski standard je istoveten z: EN 378-4:2000/A1:2003
ICS:
27.080 7RSORWQHþUSDONH Heat pumps
27.200 Hladilna tehnologija Refrigerating technology
SIST EN 378-4:2000/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 378-4:2000/A1:2004

---------------------- Page: 2 ----------------------

SIST EN 378-4:2000/A1:2004
EUROPEAN STANDARD
EN 378-4:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 27.080; 27.200
English version
Refrigerating systems and heat pumps - Safety and
environmental requirements - Part 4: Operation, maintenance,
repair and recovery
Systèmes de réfrigération et pompes à chaleur - Exigences Kälteanlagen und Wärmepumpen - Sicherheitstechnische
de sécurité et d'envionnement - Partie 4 : Fonctionnement, und umweltrelevante Anforderungen - Teil 4: Betrieb,
maintenance, réparation et récupération Instandhaltung, Instandsetzung und Rückgewinnung
This amendment A1 modifies the European Standard EN 378-4:2000; it was approved by CEN on 20 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All ri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.