EN ISO 12213-2:2009

Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)

ISO 12213 specifies methods for the calculation of compression factors of natural gases, natural gases containing a synthetic admixture and similar mixtures at conditions under which the mixture can exist only as a gas.
It is divided into three parts: this part, ISO 12213-2:2006, specifies a method for the calculation of compression factors when the detailed composition of the gas by mole fractions is known, together with the relevant pressures and temperatures.
The method is applicable to pipeline quality gases within the ranges of pressure p and temperature T at which transmission and distribution operations normally take place, with an uncertainty of about +/- 0,1 %. It can be applied, with greater uncertainty, to wider ranges of gas composition, pressure and temperature.

Erdgas - Berechnung von Realgasfaktoren - Teil 2: Berechnungen basierend auf einer molaren Gasanalyse als Eingangsgröße (ISO 12213-2:2006)

Gemische Verfahren zur Berechnung der Realgasfaktoren unter Bedingungen fest, unter denen das Gemisch
nur als Gas existieren kann.
In diesem Teil von ISO 12213 wird ein Verfahren zur Berechnung der Realgasfaktoren für Gase festgelegt,
deren genaue stoffmengenmäßige Zusammensetzung ebenso wie die zutreffenden Drücke und
Temperaturen bekannt sind.
Das Verfahren ist mit einer Unsicherheit von etwa ± 0,1 % auf aufbereitete Erdgase innerhalb der Bereiche für
den Druck p und die Temperatur T anwendbar, bei denen Transport- und Verteilungsvorgänge üblicherweise
ablaufen. Es kann — mit höherer Unsicherheit — auch auf erweiterte Bereiche der Gaszusammensetzung,
des Drucks und der Temperatur angewendet werden (siehe Anhang E).
Weitere Angaben zum Geltungs- und Anwendungsbereich des Verfahrens sind in ISO 12213-1 enthalten.

Gaz naturel - Calcul du facteur de compression - Partie 2: Calcul à partir de l'analyse de la composition molaire (ISO 12213-2:2006)

L'ISO 12213 spécifie des méthodes pour le calcul des facteurs de compression des gaz naturels, des gaz naturels contenant un adjuvant synthétique et de mélanges similaires dans des conditions telles que le mélange ne peut exister que sous forme gazeuse.
Elle est divisée en trois parties: la présente partie, l'ISO 12213-2:2006, spécifie une méthode pour le calcul des facteurs de compression lorsque la composition détaillée du gaz par fractions molaires est connue, ainsi que les pressions et les températures correspondantes.
La méthode est applicable au gaz de qualité réseau dans les plages de pression, p, et de température, T, dans lesquelles s'effectuent normalement les opérations de transport et de distribution, avec une incertitude de l'ordre de +/- 0,1 %. Elle peut s'appliquer, avec une incertitude plus élevée, à des plages plus étendues de composition des gaz, de pression et de température.

Zemeljski plin - Izračun kompresijskega faktorja - 2. del: Izračun na podlagi analize molarne sestave (ISO 12213-2:2006)

General Information

• Status: Published
• Publication Date: 08-Sep-2009
• ICS: 75.060 - Natural gas
• Technical Committee: CEN/TC 238 - Test gases, test pressures and categories of appliances
• Drafting Committee: CEN/TC 238 - Test gases, test pressures and categories of appliances
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 09-Sep-2009
• Completion Date: 09-Sep-2009
• Ref Project: SIST EN ISO 12213-2:2009 - Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)

Relations

• Replaces: EN ISO 12213-2:2005 - Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:1997)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Erdgas - Berechnung von Realgasfaktoren - Teil 2: Berechnungen basierend auf einer molaren Gasanalyse als Eingangsgröße (ISO 12213-2:2006)Gaz naturel - Calcul du facteur de compression - Partie 2: Calcul à partir de l'analyse de la composition molaire (ISO 12213-2:2006)Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)75.060Zemeljski plinNatural gasICS:Ta slovenski standard je istoveten z:EN ISO 12213-2:2009SIST EN ISO 12213-2:2009en01-november-2009SIST EN ISO 12213-2:2009SLOVENSKI
STANDARDSIST EN ISO 12213-2:20051DGRPHãþD



SIST EN ISO 12213-2:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 12213-2
September 2009 ICS 75.060 Supersedes EN ISO 12213-2:2005English Version
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)
Gaz naturel - Calcul du facteur de compression - Partie 2: Calcul à partir de l'analyse de la composition molaire (ISO 12213-2:2006)
Erdgas - Berechnung von Realgasfaktoren - Teil 2: Berechnungen basierend auf einer molaren Gasanalyse als Eingangsgröße (ISO 12213-2:2006) This European Standard was approved by CEN on 13 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12213-2:2009: ESIST EN ISO 12213-2:2009



EN ISO 12213-2:2009 (E) 2 Contents Page Foreword .3 SIST EN ISO 12213-2:2009



EN ISO 12213-2:2009 (E) 3 Foreword The text of ISO 12213-2:2006 has been prepared by Technical Committee ISO/TC 193 “Natural gas” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 12213-2:2009. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12213-2:2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12213-2:2006 has been approved by CEN as a EN ISO 12213-2:2009 without any modification.
SIST EN ISO 12213-2:2009



SIST EN ISO 12213-2:2009



Reference numberISO 12213-2:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO12213-2Second edition2006-11-15Natural gas — Calculation of compression factor — Part 2: Calculation using molar-composition analysis Gaz naturel — Calcul du facteur de compression — Partie 2: Calcul à partir de l'analyse de la composition molaire
SIST EN ISO 12213-2:2009



ISO 12213-2:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing
...