EN ISO 23874:2018
(Main)Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation (ISO 23874:2006)
Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation (ISO 23874:2006)
ISO 23874:2006 describes the performance requirements for analysis of treated natural gas of transmission or pipeline quality in sufficient detail so that the hydrocarbon dewpoint temperature can be calculated using an appropriate equation of state. ISO 23874:2006 can be applied to gases that have maximum dewpoint temperatures (cricondentherms) between 0 °C and - 50 °C. The pressures at which these maximum dewpoint temperatures are calculated are in the range 2 MPa (20 bar) to 5 MPa (50 bar).
The procedure given in ISO 23874:2006 covers the measurement of hydrocarbons in the range C5 to C12. n-Pentane, which is quantitatively measured using ISO 6974 (all parts), is used as a bridge component and all C6 and higher hydrocarbons are measured relative to n-pentane. Major components are measured using ISO 6974 (all parts) and the ranges of components that can be measured are as defined in ISO 6974-1.
Erdgas - Gaschromatographische Anforderungen für die Berechnung des Taupunktes von Kohlenwasserstoff (ISO 23874:2006)
Diese Internationale Norm beschreibt die Leistungsanforderungen für die Analyse von behandeltem Erdgas in Transport- oder Rohrleitungsqualität so detailliert, dass die Kohlenwasserstoff-Taupunkttemperatur mit einer geeigneten Zustandsgleichung berechnet werden kann. Sie kann auf Gase angewandt werden, die über maximale Taupunkttemperaturen (Krikondentherm Punkte) zwischen 0 °C und −50 °C verfügen. Die Drücke, bei welchen diese maximalen Taupunkttemperaturen berechnet werden, liegen im Bereich zwischen 2 MPa (20 bar) und 5 MPa (50 bar). Hauptbestandteile werden mittels ISO 6974 (alle Teile) gemessen und die Bereiche der Bestandteile, welche gemessen werden können, sind in ISO 6974 1 definiert. Die in dieser Internationalen Norm dargelegte Verfahrensweise deckt die Messung von Kohlenwasserstoffen im Bereich C5 bis C12 ab. n Pentan, welches quantitativ mittels ISO 6974 (alle Teile) gemessen wird, wird als Kombinationskomponente verwendet und alle C6 und höheren Kohlenwasserstoffe werden in Relation zum n Pentan gemessen.
Gaz naturel - Exigences de chromatographie en phase gazeuse pour le calcul du point de rosée hydrocarbures (ISO 23874:2006)
L'ISO 23874:2006 décrit les exigences de performance applicables à l'analyse de gaz naturel traité de qualité transport ou réseau avec suffisamment de détails pour pouvoir calculer le point de rosée hydrocarbures au moyen d'une équation d'état appropriée. Elle peut être appliquée aux gaz dont la température de rosée maximale (cricondentherm) se situe entre 0 °C et −50 °C. Les pressions de calcul de ces points de rosée varient de 2 MPa (20 bar) à 5 MPa (50 bar). Les constituants majeurs sont mesurés suivant l'ISO 6974, les gammes de constituants pouvant être mesurés étant telles que définies dans cette norme (ISO 6974‑1). Le mode opératoire décrit ici couvre le mesurage des hydrocarbures de C5 à C12. Le n-pentane, dont la mesure quantitative s'effectue suivant l'ISO 6974 (toutes parties), sert de composé pont et tous les hydrocarbures en C6 et supérieurs sont mesurés par rapport au n-pentane.
Zemeljski plin - Zahteve plinske kromatografije za izračun rosišča ogljikovodikov (ISO 23874:2006)
Standard ISO 23874:2006 opisuje zahteve glede učinkovitosti za analizo obdelanih zemeljskih plinov za prenos in zemeljskih plinov iz cevovoda dovolj podrobno, da je mogoče izračunati temperaturo rosišča ogljikovodika z ustrezno enačbo stanja. Standard ISO 23874:2006 je mogoče uporabiti za pline z najvišjo temperaturo rosišča (krikodenterma) med 0 °C in –50 °C. Tlaki za izračun teh najvišjih temperatur rosišča so v razponu od 2 MPa (20 barov) do 5 MPa (50 barov).
Postopek iz standarda ISO 23874:2006 zajema merjenje ogljikovodikov v razponu C5 do C12. n-pentan, ki se meri kvantitativno z uporabo standarda ISO 6974 (vsi deli), se uporablja kot povezovalna komponenta, C6 in višji ogljikovodiki pa se merijo glede na n-pentan. Glavne komponente se merijo z uporabo standarda ISO 6974 (vsi deli) in razponi komponent, ki jih je mogoče izmeriti, so takšni, kot je določeno v standardu ISO 6974-1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2018
=HPHOMVNLSOLQ=DKWHYHSOLQVNHNURPDWRJUDILMH]DL]UDþXQURVLãþDRJOMLNRYRGLNRY
,62
Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation
(ISO 23874:2006)
Erdgas - Gaschromatographische Anforderungen für die Berechnung des Taupunktes
von Kohlenwasserstoff (ISO 23874:2006)
Gaz naturel - Exigences relatives à la chromatographie en phase gazeuse pour le calcul
du point de rosée hydrocarbures (ISO 23874:2006)
Ta slovenski standard je istoveten z: EN ISO 23874:2018
ICS:
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
75.060 Zemeljski plin Natural gas
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 23874
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 75.060
English Version
Natural gas - Gas chromatographic requirements for
hydrocarbon dewpoint calculation (ISO 23874:2006)
Gaz naturel - Exigences relatives à la chromatographie Erdgas - Gaschromatographische Anforderungen für
en phase gazeuse pour le calcul du point de rosée die Berechnung des Taupunktes von
hydrocarbures (ISO 23874:2006) Kohlenwasserstoff (ISO 23874:2006)
This European Standard was approved by CEN on 31 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23874:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 23874:2006 has been prepared by Technical Committee ISO/TC 193 "Natural gas” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 23874:2018 by
Technical Committee CEN/TC 238 “Test gases, test pressures, appliance categories and gas appliance
types” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 23874:2006 has been approved by CEN as EN ISO 23874:2018 without any modification.
INTERNATIONAL ISO
STANDARD 23874
First edition
2006-11-15
Natural gas — Gas chromatographic
requirements for hydrocarbon dewpoint
calculation
Gaz naturel — Exigences relatives à la chromatographie en phase
gazeuse pour le calcul du point de rosée hydrocarbures
Reference number
ISO 23874:2006(E)
©
ISO 2006
ISO 23874:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 23874:2006(E)
Contents Page
Foreword. iv
1 Scope.1
2 Normative references.1
3 Principle.2
4 Materials.2
5 Apparatus.2
6 Performance requirements .3
7 Sampling.3
8 Analytical procedure.4
9 Methods of test .7
10 Uncertainty in composition .9
11 Calculation of dewpoint temperature .9
12 Analytical uncertainty contribution to dewpoint temperature .9
Annex A (informative) Typical analytical conditions for C to C analysis .10
5 12
Annex B (informative) Validation of fraction data.12
Annex C (informative) Precision of area ratio .16
Annex D (informative) Recommendations on sample calibration gas introduction .20
Annex E (informative) Calculation of fraction quantities, boiling points and component
uncertainties.22
Bibliography .26
ISO 23874:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 23874 was prepared by Technical Committee ISO/TC 193, Natural gas, Subcommittee SC 1, Analysis of
natural gas.
iv © ISO 2006 – All rights reserved
INTERNATIONAL STANDARD ISO 23874:2006(E)
Natural gas — Gas chromatographic requirements for
hydrocarbon dewpoint calculation
1 Scope
This International Standard describes the performance requirements for analysis of treated natural gas of
transmission or pipeline quality in sufficient detail so that the hydrocarbon dewpoint temperature can be
calculated using an appropriate equation of state. It can be applied to gases that have maximum dewpoint
temperatures (cricondentherms) between 0 °C and – 50 °C. The pressures at which these maximum dewpoint
temperatures are calculated are in the range 2 MPa (20 bar) to 5 MPa (50 bar). Major components are
measured using ISO 6974 (all parts) and the ranges of components that can be measured are as defined in
ISO 6974-1. The procedure given in this International Standard covers the measurement of hydrocarbons in
the range C to C . n-Pentane, which is quantitatively measured using ISO 6974 (all parts), is used as a
5 12
bridge component and all C and higher hydrocarbons are measured relative to n-pentane.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 6974-1, Natural gas — Determination of composition with defined uncertainty by gas chromatography —
Part 1: Guidelines for tailored analysis
ISO 6974-2, Natural gas — Determination of composition with defined uncertainty by gas chromatography —
Part 2: Measuring-system characteristics and statistics for processing of data
ISO 6974-3, Natural gas — Determination of composition with defined uncertainty by gas chromatography —
Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C using
two packed columns
ISO 6974-4, Natural gas — Determination of composition with defined uncertainty by gas chromatography —
Part 4: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-
1 5 6+
line measuring system using two columns
ISO 6974-5, Natural gas — Determination of composition with defined uncertainty by gas chromatography —
Part 5: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-
1 5 6+
line process application using three columns
ISO 6974-6, Natural gas — Determination of composition with defined uncertainty by gas chromatography —
Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C to C hydrocarbons using
1 8
three capillary columns
ISO 6975, Natural gas — Extended analysis — Gas-chromatographic method
ISO 10715, Natural gas — Sampling guidelines
ISO 23874:2006(E)
3 Principle
For hydrocarbon gas mixtures such as natural gas, the phase boundary or dewpoint line distinguishing single-
phase gas from gas-liquid mixtures is a complex function of pressure, temperature and composition. For a
given composition, the pressure at which the dewpoint temperature is at a maximum is intermediate between
those found in transmission and distribution operations. The analysis shall be comprehensive for inert
components and for hydrocarbons up to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.