EN ISO 9693-1:2012

Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012)

ISO 9693-1:2012 specifies test methods for determining the compatibility of metallic and ceramic materials used for dental restorations by testing the composite structure.
The requirements given in ISO 9693-1:2012 are applicable to metallic materials and ceramics when used in combination, and are not applicable to either metallic materials or ceramics when used alone.

Zahnheilkunde - Verbundprüfung - Teil 1: Metall-Keramiksysteme (ISO 9693-1:2012)

Dieser Teil von ISO 9693 legt Prüfverfahren zur Bestimmung der Kompatibilität metallischer und keramischer Werkstoffe, die zur Herstellung von Restaurationen in der Zahnheilkunde verwendet werden, fest, indem die Verbundstruktur geprüft wird.
Die Anforderungen in diesem Teil von ISO 9693 gelten für metallische Werkstoffe und Keramiken, wenn sie zusammen im Verbund verwendet werden, und die Erfüllung der Anforderungen darf nicht allein für die metallischen Werkstoffe oder die Keramiken behauptet werden.
ANMERKUNG   Anforderungen an metallische Werkstoffe werden in ISO 22674 beschrieben; Anforderungen an keramische Werkstoffe werden in ISO 6872 beschrieben.

Médecine bucco-dentaire - Essais de compatibilité - Partie 1: Systèmes métallo-céramiques (ISO 9693-1:2012)

L'ISO 9693-1:2012 spécifie les méthodes d'essai permettant de déterminer la compatibilité des matériaux métalliques et des produits céramiques utilisés pour les restaurations dentaires en soumettant à essai la structure composite.
Les exigences données dans l'ISO 9693-1:2012 s'appliquent aux matériaux métalliques et aux céramiques lorsqu'ils sont utilisés ensemble et ne s'appliquent ni aux matériaux métalliques seuls, ni aux céramiques seules.

Zobozdravstvo - Preskušanje združljivosti - 1. del: Kovinsko-keramični sistemi (ISO 9693-1:2012)

Ta del standarda ISO 9693 določa preskusne metode za določanje združljivosti kovinskih in keramičnih materialov, ki se uporabljajo za popravila zob, s preskušanjem njihove kompozitne strukture. Zahteve iz tega dela standarda ISO 9693 veljajo za kovinske in keramične materiale, kadar se uporabljajo skupaj, ne veljajo pa za kovinske ali keramične materiale, uporabljene ločeno.

General Information

• Status: Withdrawn
• Publication Date: 14-Feb-2012
• Withdrawal Date: 19-Nov-2019
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Nov-2019
• Ref Project: SIST EN ISO 9693-1:2012 - Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012)

Relations

• Replaces: EN ISO 9693:2000 - Metal-ceramic dental restorative systems (ISO 9693:1999)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 9693:2019 - Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2019)
• Effective Date: 27-Nov-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2012
1DGRPHãþD
SIST EN ISO 9693:2001
=RER]GUDYVWYR3UHVNXãDQMH]GUXåOMLYRVWLGHO.RYLQVNRNHUDPLþQLVLVWHPL
,62
Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012)
Zahnheilkunde - Verbundprüfung - Teil 1: Metall-Keramiksysteme (ISO 9693-1:2012)
Médecine bucco-dentaire - Essais de compatibilité - Partie 1: Systèmes métallo-
céramiques (ISO 9693-1:2012)
Ta slovenski standard je istoveten z: EN ISO 9693-1:2012
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9693-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 11.060.10 Supersedes EN ISO 9693:2000
English Version
Dentistry - Compatibility testing - Part 1: Metal-ceramic systems
(ISO 9693-1:2012)
Médecine bucco-dentaire - Essais de compatibilité - Partie Zahnheilkunde - Verbundprüfung - Teil 1: Metall-
1: Systèmes métallo-céramiques (ISO 9693-1:2012) Keramiksysteme (ISO 9693-1:2012)
This European Standard was approved by CEN on 14 February 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9693-1:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 9693-1:2012) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9693:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9693-1:2012 has been approved by CEN as a EN ISO 9693-1:2012 without any modification.

INTERNATIONAL ISO
STANDARD 9693-1
First edition
2012-02-15
Dentistry — Compatibility testing —
Part 1:
Metal-ceramic systems
Médecine bucco-dentaire — Essais de compatibilité —
Partie 1: Systèmes métallo-céramiques
Reference number
ISO 9693-1:2012(E)
©
ISO 2012
ISO 9693-1:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 9693-1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9693-1 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 2,
Prosthodontic materials.
1)
This first edition of ISO 9693-1, together with ISO 9693-2 , cancels and replaces ISO 9693:1999. It also
incorporates the Amendment ISO 9693:1999/Amd 1:2005.
ISO 9693 consists of the following parts, under the general title Dentistry — Compatibility testing:
— Part 1: Metal-ceramic systems
The following parts are under preparation:
— Part 2: Ceramic-ceramic systems
1) Under preparation.
ISO 9693-1:2012(E)
Introduction
Dental metallic materials and ceramics are suitable for use in the fabrication of metal-ceramic dental restorations.
iv © ISO 2012 – All rights reserved

INTERNATIONAL STANDARD ISO 9693-1:2012(E)
Dentistry — Compatibility testing —
Part 1:
Metal-ceramic systems
1 Scope
This part of ISO 9693 specifies test methods for determining the compatibility of metallic and ceramic materials
used for dental restorations by testing the composite structure.
The requirements given in this
...