EN 2743:2001

Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials

This standard specifies the standard procedures for conditioning prior to testing unaged fibre reinforced plastic materials including reinforcing fibres and cured resin systems for aerospace applications.
NOTE   In the case of uncured preimpregnate materials, requirements for conditioning before testing are specified in the relevant technical specification or test method.

Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Standardverfahren für Vorbehandlung vor der Prüfung von nicht gealterten Werkstoffen

Diese Norm legt die Standardverfahren für Vorbehandlung vor der Prüfung von nicht gealterten faserverstärkten Kunststoffen einschließlich der Verstärkungsfasern und der gehärteten Harzsysteme für die Luft- und Raumfahrt fest.
ANMERKUNG   Für nicht gehärtetes Prepregmaterial sind die Anforderungen an die Vorbehandlung vor der Prüfung in den betreffenden technischen Lieferbedingungen oder dem Prüfverfahren festgelegt.

Série aérospatiale - Plastiques renforcés de fibres - Procédures normalisées pour le conditionnement avant essais sur matériaux non vieillis

La présente norme spécifie les procédures normalisées pour le conditionnement avant essais, sur matériaux non vieillis des plastiques renforcés de fibres y compris les fibres de renfort et les systèmes de résine polymérisés pour applications aérospatiales.
NOTE   Dans le cas des matériaux préimprégnés non polymérisés, les exigences pour le conditionnement avant essai sont spécifiées dans la spécification technique ou la méthode d'essai applicables.

Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials

General Information

• Status: Published
• Publication Date: 11-Dec-2001
• Withdrawal Date: 29-Jun-2002
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 2743:2004 - Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2743:2004
01-maj-2004
Aerospace series - Fibre reinforced plastics - Standard procedures for
conditioning prior to testing unaged materials
Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior
to testing unaged materials
Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Standardverfahren für
Vorbehandlung vor der Prüfung von nicht gealterten Werkstoffen
Série aérospatiale - Plastiques renforcés de fibres - Procédures normalisées pour le
conditionnement avant essais sur matériaux non vieillis
Ta slovenski standard je istoveten z: EN 2743:2001
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 2743:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2743:2004

---------------------- Page: 2 ----------------------

SIST EN 2743:2004
EUROPEAN STANDARD
EN 2743
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 49.025.40
English version
Aerospace series - Fibre reinforced plastics - Standard
procedures for conditioning prior to testing unaged materials
Série aérospatiale - Plastiques renforcés de fibres - Luft- und Raumfahrt - Faserverstärkte Kunststoffe -
Procédures normalisées pour le conditionnement avant Standardverfahren für Vorbehandlung vor der Prüfung von
essais sur matériaux non vieillis nicht gealterten Werkstoffen
This European Standard was approved by CEN on 2 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2743:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2743:2004
EN 2743:2001 (E)
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at
the latest by June 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 2743:2004
EN 2743:2001 (E)
1 Scope
This standard specifies the standard procedures for conditioning prior to testing unaged fibre reinforced
plastic materials including reinforcing fibres and cured resin systems for aerospace applications.
NOTE In the case of uncured preimpregnate materials, requirements for conditioning before testing are
specified in the relevant technical specification or test method.
2 Normative references
This European Standard incorporates by dated or undated reference provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to
this European Standard only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
EN 3615 Aerospace series - Fibre reinforced plastics - Procedure for the determination of the
1)
conditions of exposure to humid atmosphere and the determination of moisture absorption
3 Definitions
For the purposes of this standard, the following def
...