prEN ISO 16784-1

Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO/DIS 16784-1:2023)

ISO 16784-1:2006 applies to corrosion and fouling in industrial cooling water systems.
ISO 16784-1:2006 covers the criteria that must be defined and implemented in a pilot-scale testing programme to select water treatment programmes for use in specific recirculating cooling water systems.
ISO 16784-1:2006 covers only open recirculating cooling water systems. Closed cooling systems and once-through cooling water systems are specifically excluded.
The test criteria established in ISO 16784-1:2006 are not intended to govern the type of bench and pilot-scale testing normally carried out by water treatment companies as part of their proprietary product-development programmes. However, water treatment companies may choose to use the criteria in ISO 16784-1:2006 as guidelines in the development of their own product-development test procedures.

Korrosion von Metallen und Legierungen - Korrosion und Fouling in industriellen Kühlwassersystemen - Teil 1: Leitfaden für die Bewertung von Zusatzstoffen gegen Korrosion und Fouling in offenen Kühlwasserrezirkulationssystemen (ISO/DIS 16784-1:2023)

Corrosion des métaux et alliages - Corrosion et entartrage des circuits de refroidissement à eau industriels - Partie 1: Lignes directrices pour l'évaluation pilote des additifs anticorrosion et antitartre pour circuits de refroidissement à eau à recirculation ouverts (ISO/DIS 16784-1:2023)

L'ISO 16784-1:2006 s'applique à la corrosion et à l'entartrage des circuits de refroidissement industriels.
L'ISO 16784-1:2006 traite des critères à définir et à appliquer dans un programme d'essai pilote destiné à sélectionner des programmes de traitement de l'eau utilisés pour les circuits de refroidissement à recirculation.
L'ISO 16784-2006 ne concerne que les circuits de refroidissement à recirculation ouverts. Les circuits de refroidissement fermés et les circuits à eau de refroidissement non recyclée sont spécifiquement exclus.
Les critères d'essai établis dans l'ISO 16784-1:2006 n'ont pas pour objectif d'imposer le type particulier d'essai au banc et à l'échelle pilote habituellement effectué par les entreprises de traitement des eaux dans le cadre de leurs programmes de développement de produits brevetés. Les entreprises de traitement des eaux ont néanmoins la possibilité d'utiliser les critères de l'ISO 16784-1:2006 comme lignes directrices pour créer leurs propres méthodes d'essai pour le développement de produits.

Korozija kovin in zlitin - Korozija in obraščanje v industrijskih vodnih hladilnih sistemih - 1. del: Smernice za izvajanje vrednotenja pilotne serije aditivov za kontrolo korozije in obraščanja pri odprtih obtočnih hladilnih vodnih sistemih (ISO/DIS 16784-1:2023)

General Information

• Status: Not Published
• Publication Date: 02-Apr-2025
• ICS: 77.060 - Corrosion of metals
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 29-Nov-2023
• Completion Date: 29-Nov-2023
• Ref Project: oSIST prEN ISO 16784-1:2023 - Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO/DIS 16784-1:2023)

Relations

• Revises: EN ISO 16784-1:2008 - Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO 16784-1:2006)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16784-1:2023
Korozija kovin in zlitin - Korozija in obraščanje v industrijskih vodnih hladilnih
sistemih - 1. del: Smernice za izvajanje vrednotenja pilotne serije aditivov za
kontrolo korozije in obraščanja pri odprtih obtočnih hladilnih vodnih sistemih
(ISO/DIS 16784-1:2023)
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems
- Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control
additives for open recirculating cooling water systems (ISO/DIS 16784-1:2023)
Korrosion von Metallen und Legierungen - Korrosion und Fouling in industriellen
Kühlwassersystemen - Teil 1: Leitfaden für die Bewertung von Zusatzstoffen gegen
Korrosion und Fouling in offenen Kühlwasserrezirkulationssystemen (ISO/DIS 16784-
1:2023)
Corrosion des métaux et alliages - Corrosion et entartrage des circuits de
refroidissement à eau industriels - Partie 1: Lignes directrices pour l'évaluation pilote des
additifs anticorrosion et antitartre pour circuits de refroidissement à eau à recirculation
ouverts (ISO/DIS 16784-1:2023)
Ta slovenski standard je istoveten z: prEN ISO 16784-1
ICS:
77.060 Korozija kovin Corrosion of metals
oSIST prEN ISO 16784-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16784-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16784-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16784-1
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:
2023-09-06 2023-11-29
Corrosion of metals and alloys — Corrosion and fouling in
industrial cooling water systems —
Part 1:
Guidelines for conducting pilot-scale evaluation of
corrosion and fouling control additives for open
recirculating cooling water systems
Corrosion des métaux et alliages — Corrosion et entartrage des circuits de refroidissement à eau
industriels —
Partie 1: Lignes directrices pour l'évaluation pilote des additifs anticorrosion et antitartre pour circuits de
refroidissement à eau à recirculation ouverts
ICS: 77.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16784-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16784-1:2023
ISO/DIS 16784-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16784-1
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:

Corrosion of metals and alloys — Corrosion and fouling in
industrial cooling water systems —
Part 1:
Guidelines for conducting pilot-scale evaluation of
corrosion and fouling control additives for open
recirculating cooling water systems
Corrosion des métaux et alliages — Corrosion et entartrage des circuits de refroidissement à eau
industriels —
Partie 1: Lignes directrices pour l'évaluation pilote des additifs anticorrosion et antitartre pour circuits de
refroidissement à eau à recirculation ouverts
ICS: 77.060
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org
...