EN 60793-2-10:2007

Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

Applicable to optical fibre types A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Three types of requirements apply to these fibres: -general requirements, as defined in IEC 60793-2; -specific requirements common to the category A1 multimode fibres covered in this standard and which are given in clause 3; -particular requirements applicabe to individual fibre types or specific applications, which are defined in the normative family specification annexes. Temporarily included text of the DMD test method has been removed and modifications have been included on the A1a.1 and A1d chromatic dispersion specifications, and A1a.1 numerical aperture has been limited to one class only.

Lichtwellenleiter - Teil 2-10: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A1

Fibres optiques - Partie 2-10: Spécification de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A1

Applicables aux fibres optiques de type A1a, A1b et A1d. Ces fibres sont utilisées ou peuvent être intégrées dans des équipements destinés à la transmission de l'information et dans des câbles à fibres optiques. Trois types d'exigences s'appliquent à ces fibres: les exigences générales, qui sont définies dans la CEI 60793-2; des exigences spécifiques communes aux fibres multimodales de catégorie A1, couvertes par la présente norme et qui sont données à l'Article 3; des exigences particulières applicables à des types particuliers de fibres ou à des applications spécifiques, qui sont définies dans les spécifications de familles figurant en annexe. Le texte temporairement inclus sur la méthode d'essai DMD a été supprimé, et des modifications ont été incluses sur les spécifications de la dispersion chromatique des types A1a.1 et A1d, et l'ouverture numérique du type A1a.1 a été limitée à une seule classe.

Optična vlakna - 2-10. del: Specifikacije izdelka - Področna specifikacija za večrodna vlakna kategorije A1 (IEC 60793-2-10:2007)

General Information

• Status: Withdrawn
• Publication Date: 29-Nov-2007
• Withdrawal Date: 31-Aug-2010
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Parallel Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Apr-2014
• Completion Date: 18-Apr-2014
• Ref Project: SIST EN 60793-2-10:2008 - Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

Relations

• Replaces: EN 60793-2-10:2004 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• Effective Date: 28-Jan-2023
• Replaced By: EN 60793-2-10:2011 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60793-2-10:2008
01-februar-2008
1DGRPHãþD
SIST EN 60793-2-10:2006
2SWLþQDYODNQDGHO6SHFLILNDFLMHL]GHOND3RGURþQDVSHFLILNDFLMD]D
YHþURGQDYODNQDNDWHJRULMH$,(&
Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1
multimode fibres (IEC 60793-2-10:2007)
Lichtwellenleiter - Teil 2-10: Produktspezifikationen - Rahmenspezifikation für
Mehrmodenfasern der Kategorie A1 (IEC 60793-2-10:2007)
Fibres optiques - Partie 2-10: Spécification de produits - Spécification intermédiaire pour
les fibres multimodales de catégorie A1 (IEC 60793-2-10:2007)
Ta slovenski standard je istoveten z: EN 60793-2-10:2007
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60793-2-10:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60793-2-10

NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM

ICS 33.180.10 Supersedes EN 60793-2-10:2004


English version


Optical fibres -
Part 2-10: Product specifications -
Sectional specification for category A1 multimode fibres
(IEC 60793-2-10:2007)


Fibres optiques -  Lichtwellenleiter -
Partie 2-10: Spécification de produits - Teil 2-10: Produktspezifikationen -
Spécification intermédiaire pour les fibres
Rahmenspezifikation
multimodales de catégorie A1 für Mehrmodenfasern der Kategorie A1
(CEI 60793-2-10:2007) (IEC 60793-2-10:2007)




This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-2-10:2007 E

---------------------- Page: 2 ----------------------

EN 60793-2-10:2007 – 2 –
Foreword
The text of document 86A/1046/CDV, future edition 3 of IEC 60793-2-10, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60793-2-10 on 2007-09-01.
This European Standard supersedes EN 60793-2-10:2004.
Temporarily included text of the DMD test method has been removed and modifications have been
included on the A1a.1 and A1d chromatic dispersion specifications, and A1a.1 numerical aperture has
been limited to one class only.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60793-2-10:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60794-2 NOTE Harmonized as EN 60794-2:2003 (not modified).

__________

---------------------- Page: 3 ----------------------

– 3 – EN 60793-2-10:2007

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant
...