EN 61300-2-55:2017
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
IEC 61300-2-55: 2017 describes the test procedure to measure the mounting strength of an optical adaptor or receptacle to a fixture. Keywords: mounting strength of an optical adaptor
Lichtwellenleiter Verbindungselemente und passive Bauteile – Grundlegende Prüf- und Messverfahren – Teil 2-55: Prüfungen – Stabilität der Befestigung eines montierten Adapters
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-55: Essais - Résistance du raccord monté
IEC 61300-2-55:2017 décrit la procédure d’essai pour mesurer la résistance de montage d’un raccord ou embase optique sur une fixation.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-55. del: Preskusi - Trdnost nameščenega adapterja (IEC 61300-2-55:2017)
Ta del standarda IEC 61300 opisuje preskusni postopek za trdnost nameščenega optičnega adapterja ali priključka na pritrditev.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2017
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO 3UHVNXVL7UGQRVWQDPHãþHQHJDDGDSWHUMD ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-55: Tests - Strength of mounted adaptor (IEC 61300-2
-55:2017)
Ta slovenski standard je istoveten z: EN 61300-2-55:2017
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61300-2-55
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2017
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-55: Tests -
Strength of mounted adaptor
(IEC 61300-2-55:2017)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-
mesures - Partie 2-55: Essais - Résistance du raccord 55: Prüfungen - Stabilität der Befestigung eines montierten
monté Adapters
(IEC 61300-2-55:2017) (IEC 61300-2-55:2017)
This European Standard was approved by CENELEC on 2017-04-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61300-2-55:2017 E
European foreword
The text of document 86B/4054/FDIS, future edition 1 of IEC 61300-2-55, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-55:2017.
The following dates are fixed:
(dop) 2018-01-13
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-04-13
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61300-2-55:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61753-1 NOTE Harmonized as EN 61753-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures -- Part 3-1:
Examinations and measurements - Visual
examination
IEC 61300-2-55 ®
Edition 1.0 2017-03
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-55: Tests – Strength of mounted adaptor
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.20 ISBN 978-2-8322-4076-2
– 2 – IEC 61300-2-55:2017 © IEC 2017
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General description . 6
5 Apparatus . 6
5.1 Loading method . 6
5.1.1 General . 6
5.1.2 Method A . 7
5.1.3 Method B . 7
5.2 Force generator . 8
5.3 Force gauge . 8
5.4 Holding fixture . 8
5.5 Fixture . 8
5.6 Timer . 8
6 Procedure . 9
6.1 General description . 9
6.2 Pre-conditioning . 9
6.3 Initial examination and measurement . 9
6.4 Mount DUT . 9
6.5 Conditioning . 9
6.6 Recovery . 9
6.7 Final examination and measurement . 9
7 Severity . 9
8 Details to be specified . 10
Annex A (normative) Fixture information . 11
Bibliography . 15
Figure 1 – Example of test apparatus for method A . 7
Figure 2 – Example of test apparatus for method B . 8
Figure A.1 – Fixture cut-out information for SC simplex adaptor . 11
Figure A.2 – Fixture cut-out information for SC duplex adaptor . 11
Figure A.3 – Fixture cut-out information for LC simplex adaptor . 12
Figure A.4 – Fixture cut-out information for LC duplex (square flange) adaptor . 12
Figure A.5 – Fixture cut-out information for LC duplex (rectangular flange) adaptor . 13
Figure A.6 – Fixture cut-out information for LC quad (rectangular flange) adaptor . 13
Figure A.7 – Fixture cut-out information for MPO adaptor . 13
Table 1 – Recommended severity value . 9
Table A.1 – Dimensions for SC simplex adaptor . 11
Table A.2 – Dimensions for SC duplex adaptor . 12
Table A.3 – Dimensions for LC simplex adaptor . 12
Table A.4 – Dimensions for LC duplex (square flange) adaptor . 12
IEC 61300-2-55:2017 © IEC 2017 – 3 –
Table A.5 – Dimensions for LC duplex (rectangular flange) adaptor . 13
Table A.6 – Dimensions for LC quad (rectangular flange) adaptor . 13
Table A.7 – Dimensions for MPO adaptor . 14
– 4 – IEC 61300-2-55:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-55: Tests – Strength of mounted adaptor
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.