EN IEC 61300-2-44:2024
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
IEC 61300-2-44:2024 specifies a test to determine the influence of flexing under tensile load of the strain relief of fibre optic interconnecting devices or components. The intention is to simulate the number of flexing cycles which would typically be experienced during service life. This test is applied to both single fibre cable and multiple fibre cable. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) replaced active monitoring with transient loss for measurements during test; b) harmonized recommended severities according to IEC 61753-1.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-44: Prüfungen - Biegen der Zugentlastung von LWL-Elementen und -Bauteilen
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-44: Essais - Flexion du serre-câble des dispositifs et composants fibroniques
IEC 61300-2-44: 2024 spécifie un essai pour déterminer l’influence de flexions sous une charge de traction du serre-câble des dispositifs d’interconnexion fibroniques ou des composants fibroniques. L’objectif est de simuler le nombre de flexions généralement expérimenté en service. L’essai est appliqué sur des câbles à fibre unique et des câbles à fibres multiples. Cette quatrième édition annule et remplace la troisième édition parue en 2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: remplacement du contrôle actif par la perte transitoire concernant les mesurages pendant l’essai; sévérités recommandées harmonisées conformément à l’IEC 61753-1.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-44. del: Preskusi - Spreminjanje natezne obremenitve optičnih elementov in komponent (IEC 61300-2-44:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61300-2-44:2023
01-maj-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-44. del: Preskusi - Spreminjanje natezne obremenitve optičnih
elementov in komponent (IEC 61300-2-44:2013)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic
devices and components
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 2-44: Essais - Flexion du serre-câble des
dispositifs à fibres optiques
Ta slovenski standard je istoveten z: prEN IEC 61300-2-44:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-2-44:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-2-44:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-2-44:2023
86B/4722/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-2-44 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-03 2023-05-26
SUPERSEDES DOCUMENTS:
86B/4597/CD, 86B/4621A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and
components
PROPOSED STABILITY DATE: 2033
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-2-44:2023
IEC CDV 61300-2-44/ED4 IEC:2023 – 2 – 86B/4722/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms, definitions, and abbreviated terms . 5
6 3.1 Terms and definitions . 5
7 3.2 Abbreviated terms . 5
8 4 General description . 6
9 5 Apparatus . 6
10 5.1 General . 6
11 5.2 Optical source . 7
12 5.3 Detector . 7
13 5.4 Mounting fixture . 8
14 5.5 Tensile loa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.