EN 61158-3-12:2012

Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements

Project launched as FprEN 61158-300 and ratified as EN 61158-3-12 - Initial project split into 5 subparts i.e. EN 61158-3-12, 14, 19, 21 and 22 * Supersedes EN 61158-3-12:2008
Superseded by EN 61158-3-12:2014

Industrielle Kommunikationsnetze - Feldbusse - Teil 3-12: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 12-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-12: Définition des services de couche liaison de données - Éléments de Type 12

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-12. del: Definicija opravil na nivoju podatkovnih povezav (IEC 61158-3-12:2010)

Ta del standarda IEC 61158 določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavljanje prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več določenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja določenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja nivo podatkovnih povezav procesnih vodil tipa 12 v zvezi z a) primitivnimi dejanji in dogodki opravila; b) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; c) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je določiti opravila, ki se zagotavljajo za: – aplikacijski nivo procesnih vodil tipa 12 na meji med aplikacijskim nivojem in nivojem podatkovnih povezav referenčnega modela procesnih vodil; – vodenje sistemov na meji med nivojem podatkovnih povezav in vodenje sistemov referenčnega modela procesnih vodil.

General Information

• Status: Withdrawn
• Publication Date: 24-May-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Sep-2017
• Completion Date: 17-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-3-12:2012 - Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition (IEC 61158-3-12:2010)

Relations

• Replaces: EN 61158-3-12:2008 - Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements
• Effective Date: 28-Jan-2023
• Replaced By: EN 61158-3-12:2014 - Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements
• Effective Date: 22-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2012
1DGRPHãþD
SIST EN 61158-3-12:2008
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-12. del:
Definicija opravil na nivoju podatkovnih povezav (IEC 61158-3-12:2010)
Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer
service definition (IEC 61158-3-12:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-12: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) (IEC 61158-3-12:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-12:
Définition des services de couche liaison de données - Éléments de Type 12 (CEI 61158
-3-12:2010)
Ta slovenski standard je istoveten z: EN 61158-3-12:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-3-12
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.20 Supersedes EN 61158-3-12:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 3-12: Data-link layer service definition -
Type 12 elements
(IEC 61158-3-12:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 3-12: Définition des services de Teil 3-12: Dienstfestlegungen des Data
couche liaison de données - Link Layer (Sicherungsschicht) -
Éléments de Type 12 Typ 12-Elemente
(CEI 61158-3-12:2010) (IEC 61158-3-12:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-3-12:2012 E
Foreword
The text of document 65C/604/FDIS, future edition 2 of IEC 61158-3-12, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-12:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-03-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-3-12:2008.
12:2008:
- editorial improvements.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-3-12:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC/TR 61158-1 NOTE  Harmonized as CLC/TR 61158-1.
IEC 61158-2 NOTE  Harmonized as EN 61158-2.
IEC 61158-4-12 NOTE  Harmonized as EN 61158-4-12.
IEC 61158-5-12 NOTE  Harmonized as EN 61158-5-12.
IEC 61158-6-12 NOTE  Harmonized as EN 61158-6-12.
IEC 61784-2 NOTE  Harmonized as EN 61784-2.

- 3 - EN 61158-3-12:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 8802-3 - Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications

ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

IEEE 802.1D - IEEE Standard for Local and Metropolitan - -
Area Networks - Media Access Control (MAC)
Bridges
IEC 61158-3-12 ®
Edition 2.0 2010-07
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 3-12: Data-link layer service definition – Type 12 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 25.04.40; 35.100.20; 35.110 ISBN 978-2-88912-077-2
– 2 – 61158-3-12 © IEC:2010(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 Overview .7
1.2 Specifications .7
1.3 Conformance.7
2 Normative references.8
3 Terms, definitions, symbols, abbreviations and conventions .8
3.1 Reference model terms and definitions .8
3.2 Service convention terms and definitions .9
3.3 Data-link service terms and definitions.10
3.4 Symbols and abbreviations .13
3.5 Common conventions .14
4 Data-link layer services and concepts .15
4.1 Operating principle .15
4.2 Topology .16
4.3 Data-link layer overview.16
4.4 Error detection overview .17
4.5 Parameter and process data handling introduction .17
4.6 Node reference model .17
4.7 Operation overview.18
4.8 Addressing .20
4.9 Slave classification .22
4.10 Structure of the communication layer in the slave.22
5 Communication services .23
5.1 Overview .23
5.2 Read services.24
5.3 Write services .27
5.4 Combined read/write services .29
5.5 Network services .33
5.6 Mailbox.34
6 Local interactions.39
6.1 Read local .39
6.2 Write local .39
6.3 Event local.40

Figure 1 – Mapping of logical data in an Ethernet frame consisting of a single Type 12
DLPDU .16
Figure 2 – Type 12 data-link reference model .18
Figure 3 – Type 12 segments in open mode .19
Figure 4 – Type 12 segment in direct mode .19
Figure 5 – Addressing mode overview .20
Figure 6 – Fieldbus memory management unit overview .21
Figure 7 – Layering of communication .23
Figure 8 – Flow of Type 12 service primitives .24

61158-3-12 © IEC:2010(E) – 3 –
Figure 9 – Successful mailbox write sequence.35
Figure 10 – Successful mailbox read sequence .35

Table 1 – Auto-increment physical read (APRD) .24
Table 2 – Configured-addresse physical read (FPRD).25
Table 3 – Broadcast read (BRD).26
Table 4 – Logical read (LRD).26
Table 5 – Auto-increment physical write (APWR) .27
Table 6 – Configured-address physical write (FPWR) .27
Table 7 – Broadcast write (BWR) .28
Table 8 – Logical write (LWR) .29
Table 9 – Auto-increment physical read/write (APRW) .29
Table 10 – Configured-address physical read/write (FPRW).30
Table 11 – Broadcast read/write (BRW).31
Table 12 – Logical read/write (LRW).31
Table 13 – Auto-increment physical read / multiple write (ARMW).32
Table 14 – Configured-address physical read / multiple write (FRMW) .32
Table 15 – Provide network variable (PNV).33
Table 16 – Mailbox write.
...