EN 62087-3:2016

Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets

IEC 62087-3:2015(E) specifies the determination of the power consumption and related characteristics of television sets. Television sets include, but are not limited to, those with CRT, LCD, PDP, OLED, or projection technologies. The operating modes and functions, as they specifically apply to television sets, are defined in detail in this part of IEC 62087. This first edition of IEC 62087-3 cancels and replaces Clauses 6 and 11 and Annex B of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-2 and IEC 62087-4 to IEC 62087-6 cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to Clauses 6 and 11 and Annex B of IEC 62087:2011. For TVs with an automatic brightness control feature, power may now be measured at multiple specific illumination levels. A method has been defined for determining the ratio of peak luminance expected in the home versus the peak luminance expected in the retail environment. Sections related to general measuring conditions and procedures are now in IEC 62087-1:2015. Sections related to signals and media are now in IEC 62087-2:2015. The titles have changed in order to comply with the current directives and to accommodate the multipart structure.

Audio-, Video- und verwandte Geräte – Messverfahren für die Leistungsaufnahme – Teil 3: Fernsehgeräte

Appareils audio, vidéo et matériel connexe - Détermination de la consommation de puissance - Partie 3: Téléviseurs

L'IEC 62087-3:2015 spécifie la détermination de la consommation de puissance et des caractéristiques associées des téléviseurs. Les téléviseurs désignent, la liste n’étant pas exhaustive, les téléviseurs des technologies à CRT, LCD, PDP, OLED ou à projection. Les modes de fonctionnement et les fonctions, dans la mesure où ils s'appliquent de façon spécifique à des téléviseurs, sont définis en détail dans la présente partie de l'IEC 62087. La première édition de l'IEC 62087-3 annule et remplace l'Article 6, l'Article 11 et l'Annexe B de l'IEC 62087:2011. La présente norme, ainsi que l'IEC 62087-1, l'IEC 62087-2 et les IEC 62087-4 à IEC 62087-6, annulent et remplacent l'IEC 62087:2011 dans son intégralité. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'Article 6, à l'Article 11 et à l'Annexe B de l'IEC 62087:2011. – Pour les téléviseurs munis d'une fonction de commande automatique de luminosité, la puissance peut désormais être mesurée à plusieurs niveaux d'éclairage particuliers. – Une méthode a été définie pour déterminer le rapport de luminance de crête prévu dans l'environnement domestique en fonction de la luminance de crête prévue dans l'environnement du commerce de détail. – Les sections concernant les conditions générales et les modes opératoires de mesure se trouvent désormais dans l'IEC 62087-1:2015. – Les sections concernant les signaux et les supports se trouvent désormais dans l'IEC 62087-2:2015. – Les titres ont été modifiés afin de se conformer aux directives actuelles et de tenir compte de la structure en plusieurs parties.

Avdio, video in pripadajoča oprema - Ugotavljanje porabe energije - 3. del: Televizijski sprejemnik (IEC 62087-3:2015)

Ta del standarda IEC 62087 določa ugotavljanje porabe energije in sorodnih značilnosti televizijskih sprejemnikov. Televizijski sprejemniki med drugim zajemajo sprejemnike s katodno cevjo (CRT), z zaslonom s tekočimi kristali (LCD), s prikazovalniki s plazmo (PDP), s prikazovalniki z organskimi svetlečimi diodami (OLED) ali s projekcijskimi tehnologijami.
Načini delovanja in funkcije, ki se uporabljajo izključno za televizijske sprejemnike, so podrobno opredeljeni v tem delu standarda IEC 62087.
Ta standard je omejen na televizijske sprejemnike, ki se lahko povežejo z zunanjim virom napajanja. Televizijski sprejemniki, ki vključujejo neodstranljivo glavno baterijo, niso obravnavani v tem standardu. Televizijski sprejemniki lahko vključujejo poljubno število pomožnih baterij.
Merilni pogoji iz tega standarda predstavljajo običajno uporabo opreme in se lahko razlikujejo od posebnih pogojev, kot so npr. določeni v varnostnih standardih.

General Information

• Status: Published
• Publication Date: 18-Feb-2016
• Withdrawal Date: 18-Feb-2019
• ICS: 33.160.10 - Amplifiers
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 19-Feb-2016
• Completion Date: 19-Feb-2016
• Ref Project: SIST EN 62087-3:2016 - Audio, video, and related equipment - Determination of power consumption -- Part 3: Television sets (IEC 62087-3:2015)

Relations

• Replaces: EN 62087:2012 - Methods of measurement for the power consumption of audio, video and related equipment
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 62087-3:2023 - Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets
• Effective Date: 26-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2016
1DGRPHãþD
SIST EN 62087:2012
$YGLRYLGHRLQSULSDGDMRþDRSUHPD8JRWDYOMDQMHSRUDEHHQHUJLMHGHO
7HOHYL]LMVNLVSUHMHPQLN,(&
Audio, video, and related equipment - Determination of power consumption -- Part 3:
Television sets (IEC 62087-3:2015)
Messverfahren für die Leistungsaufnahme von Audio-, Video- und verwandten Geräten -
Teil 3: Fernsehgeräte (IEC 62087-3:2015)
Appareils audio, vidéo et matériel connexe - Détermination de la consommation de
puissance - Partie 3: Téléviseurs (IEC 62087-3:2015)
Ta slovenski standard je istoveten z: EN 62087-3:2016
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.160.25 Televizijski sprejemniki Television receivers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62087-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 33.160.10 Supersedes EN 62087:2012 (partially)
English Version
Audio, video, and related equipment - Determination of power
consumption - Part 3: Television sets
(IEC 62087-3:2015)
Appareils audio, vidéo et matériel connexe - Détermination Messverfahren für die Leistungsaufnahme von Audio-,
de la consommation de puissance - Partie 3: Téléviseurs Video- und verwandten Geräten - Teil 3: Fernsehgeräte
(IEC 62087-3:2015) (IEC 62087-3:2015)
This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62087-3:2016 E
European foreword
The text of document 100/2468/FDIS, future edition 1 of IEC 62087-3, prepared by Technical Area 12
“AV energy efficiency and smart grid applications” of IEC/TC 100 “Audio, video and multimedia
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62087-3:2016.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-08-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62087:2012 (partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62087-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

1)
IEC 62087:2008 NOTE Harmonized as EN 62087-2:2009 (not modified).
IEC 62087:2011 NOTE Harmonized as EN 62087-2:2012 (not modified).
IEC 62087 Series NOTE Harmonized as EN 62087 Series.
IEC 62087-4 NOTE Harmonized as EN 62087-4.
IEC 62087-5 NOTE Harmonized as EN 62087-5.
IEC 62087-6 NOTE Harmonized as EN 62087-6.
IEC 62542:2013 NOTE Harmonized as EN 62542:2013 (not modified).

1)
Superseded by EN 62087-2:2012 (IEC 62087:2011).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 62087-1 2015 Audio, video, and related equipment - EN 62087-1 2016
Determination of power consumption -
Part 1: General
IEC 62087-2 2015 Audio, video, and related equipment - EN 62087-2 2016
Determination of power consumption -
Part 2: Signals and media
IEC 62301 (mod) 2011 Household electrical appliances - EN 50564 2011
Measurement of standby power
IEC 62087-3 ®
Edition 1.0 2015-06
INTERNATIONAL
STANDARD
colour
inside
Audio, video, and related equipment – Determination of power consumption –

Part 3: Television sets
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160.10 ISBN 978-2-8322-2683-4

– 2 – IEC 62087-3:2015 © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 9
4 Specification of operating modes and functions . 10
4.1 Table of operating modes and functions . 10
4.2 Configurations and picture settings . 12
4.2.1 Conceptual framework . 12
4.2.2 Selection of home configuration . 12
4.2.3 Selection of retail configuration . 12
5 Measurement conditions . 13
5.1 General . 13
5.2 Power source . 13
5.3 Environmental conditions . 13
5.4 Ambient light conditions . 13
5.5 Measuring equipment . 13
5.5.1 Power measuring instrument . 13
5.5.2 Luminance measuring device . 13
5.5.3 Illuminance measuring instrument . 13
5.6 Signal generation . 13
5.6.1 Equipment . 13
5.6.2 Interfaces . 13
5.6.3 Accuracy . 13
5.6.4 Light source for specific illuminance levels . 14
5.6.5 Light source for disabling the ABC feature . 14
5.6.6 Networking equipment . 14
6 Procedures . 15
6.1 Order of activities. 15
6.2 Preparation . 15
6.2.1 Measuring plan . 15
6.2.2 Power source voltage and frequency . 16
6.2.3 Input terminals . 16
6.2.4 Video signal, On mode power consumption procedure . 16
6.2.5 Video signal, peak luminance ratio determination . 17
6.2.6 Video format . 17
6.2.7 Automatic brightness control capabilities . 17
6.2.8 Automatic brightness control levels . 18
6.2.9 Network connection capabilities . 18
6.3 Initial activities . 18
6.3.1 Order of initial activities . 18
6.3.2 Cool down . 19
6.3.3 Main batteries . 19
6.3.4 Plug-in module . 19

IEC 62087-3:2015 © IEC 2015 – 3 –
6.3.5 Installation . 19
6.3.6 Application of input signals . 20
6.3.7 Luminance measuring device setup . 20
6.3.8 Light source setup . 20
6.3.9 Power on . 21
6.3.10 TV settings . 21
6.4 Determination of power consumption, On mode . 22
6.4.1 Order of activities . 22
6.4.2 Stabilization . 23
6.4.3 Television sets without automatic brightness control enabled by default . 24
6.4.4 Television sets with automatic brightness control enabled by default . 24
6.4.5 Power measurement . 24
6.5 Determination of peak luminance ratio and power factor . 26
6.5.1 General . 26
6.5.2 Activities for peak luminance ratio and power factor determination . 26
6.6 Determination of power consumption, Partial On mode . 28
6.6.1 General . 28
6.6.2 Order of activities . 29
6.6.3 AV inputs . 29
6.6.4 Standby-passive . 29
6.6.5 Standby-active, low .
...