prEN IEC 60115-2-10:2024
(Main)Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. Since the documents of the 60115-X series are exempted from the parallel procedure (D162/C089), this New Work Item Proposal aims to endorse the main IEC document IEC 60115-2-10:2023 as a European standard. The standard shall be published together with the finalised Common Modifications.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2-10: Vordruck für Bauartspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für Durchsteckmontage auf Leiterplatten (THT), für allgemeine Geräte der Elektronik, Klassifikationsstufe G
Stalni upori za elektronsko opremo - 2-10. del: Okvirna specifikacija podrobnosti: Tankoplastni upori nizke moči z izvodi za montažo skozi prehodne luknje tiskanih vezij, za splošno elektronsko opremo, razvrstilna raven G
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Stalni upori za elektronsko opremo - 2-10. del: Okvirna specifikacija podrobnosti:
Tankoplastni upori nizke moči z izvodi za montažo skozi prehodne luknje tiskanih
vezij, za splošno elektronsko opremo, razvrstilna raven G
Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification:
Low-power film resistors with leads for through-hole assembly on circuit boards (THT),
for general electronic equipment, classification level G
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2-10: Vordruck für
Bauartspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für
Durchsteckmontage auf Leiterplatten (THT), für allgemeine Geräte der Elektronik,
Klassifikationsstufe G
Ta slovenski standard je istoveten z: prEN IEC 60115-2-10:2024
ICS:
31.040.10 Fiksni upor Fixed resistors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60115-2-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2024
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 2-10: Blank
detail specification: Low-power film resistors with leads for
through-hole assembly on circuit boards (THT), for general
electronic equipment, classification level G
(IEC 60115-2-10:2023)
To be completed Festwiderstände zur Verwendung in Geräten der Elektronik
(IEC 60115-2-10:2023) - Teil 2-10: Vordruck für Bauartspezifikation:
Niedrigbelastbare Schichtwiderstände mit
Drahtanschlüssen für Durchsteckmontage auf Leiterplatten
(THT), für allgemeine Geräte der Elektronik,
Klassifikationsstufe G
(IEC 60115-2-10:2023)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2024-12-27.
The text of this draft consists of the text of IEC 60115-2-10:2023 (40/2944/CDV).
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78796 Ref. No. prEN IEC 60115-2-10:2024 E
European foreword
This document (prEN IEC 60115-2-10:2024) consists of the text of document IEC 60115-2-10:2023,
prepared by IEC/TC 40 "Capacitors and resistors for electronic equipment".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
IEC 60115-2-10 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
Fixed resistors for use in electronic equipment –
Part 2-10: Blank detail specification: Low-power film resistors with leads for
through-hole assembly on circuit boards (THT), for general electronic
equipment, classification level G
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.040.10 ISBN 978-2-8322-6465-2
– 2 – IEC 60115-2-10:2023 © IEC 2023
CONTENTS
FOREWORD . 5
0 Introduction to the template provided by this blank detail specification. 7
0.1 Scope of this blank detail specification . 7
0.2 Function of this blank detail specification . 7
0.3 Identification of the detail specification and the resistor . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 11
4 Characteristics and ratings . 11
4.1 General . 11
4.2 Dimensions . 11
4.3 Ratings . 14
4.4 Resistance range and tolerance on resistance . 15
5 Tests and test severities . 16
5.1 General . 16
5.2 Resistance . 16
5.3 Temperature coefficient of resistance . 17
5.4 Temperature rise . 17
5.5 Endurance at the rated temperature 70 °C . 17
5.6 Endurance at a maximum temperature: UCT . 17
5.7 Short-term overload . 17
5.8 Electrostatic discharge (ESD) test . 18
5.9 Visual examination . 18
5.10 Gauging of dimensions . 18
5.11 Detail dimensions . 18
5.12 Robustness of terminations . 19
5.13 Vibration . 19
5.14 Rapid change of temperature . 19
5.15 Climatic sequence. 19
5.16 Damp heat, steady state . 19
5.17 Solderability, with lead-free solder . 20
5.18 Solderability, with SnPb solder . 20
5.19 Resistance to soldering heat . 20
5.20 Solvent resistance . 21
5.21 Insulation resistance . 21
5.22 Voltage proof . 21
5.23 Flammability . 21
6 Performance requirements. 21
6.1 General . 21
6.2 Limits for change of resistance at tests . 22
6.3 Temperature coefficient of resistance . 22
6.4 Temperature rise . 23
6.5 Visual examination . 23
6.5.1 General visual criteria . 23
6.5.2 Visual criteria after tests . 24
6.5.3 Visual criteria for packaging . 24
IEC 60115-2-10:2023 © IEC 2023 – 3 –
6.6 Solderability . 24
6.7 Insulation resistance . 24
6.8 Flammability . 25
7 Marking, packaging and ordering information . 25
7.1 Marking of the component . 25
7.2 Packaging . 25
7.3 Marking of the packaging . 25
7.4 Ordering information . 25
8 Additional information . 26
8.1 General . 26
8.2 Storage and transportation . 26
8.3 Substrate for assembly . 26
8.4 Soldering process . 26
8.5 Use of cleaning agents or solvents . 26
8.6 Coating or potting after assembly . 27
9 Quality assessment procedures . 27
9.1 General . 27
9.1.1 100 % test . 27
9.1.2 Certificate of conformity (CoC) . 27
9.1.3 Certified test records of released lots . 28
9.2 Qualification approval . 28
9.3 Maintenance of a qualification approval . 28
9.3.1 Quality conformance inspection . 28
9.3.2 Non-conforming specimen . 28
Annex A (normative) Symbols and abbreviated terms . 37
A.1 Symbols . 37
A.2 Abbreviated terms . 39
Annex B (normative) Reference for visual examination . 40
Annex C (normative) Zero Ohm resistors (jumpers). 41
C.1 General . 41
C.2 Characteristics and ratings .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.