Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units

Covers the connector dependent interface dimensions for subracks and plug-in units in accordance with subracks of IEC 60297-3-101. Refers to two-part connectors of IEC 60603-2, IEC 61076-4-101, IEC 61076-4-113 and introduces the related subrack and plug-in unit interface dimensions.

Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil 3-104: Steckverbinderabhängige Schnittstellenmaße für Baugruppenträger und Baugruppen

Structures mécaniques pour équipements électroniques - Dimensions des structures mécaniques de la série de 482,6 mm (19 in) - Partie 3-104: Dimensions de l'interface des bacs et blocs enfichables en fonction du connecteur

Contient les dimensions de l'interface pour les bacs et les blocs enfichables en fonction du connecteur conformément aux bacs de la série CEI 60297-3-101. Se réfère aux connecteurs en deux parties des normes CEI 60603-2, CEI 61076-4-101, CEI 61076-4-113 et introduit les dimensions correspondantes de l'interface du bac et du bloc enfichable.

Mehanske strukture elektronske opreme - Mere mehanskih struktur serije 482,6 mm (19") - 3-104. del: Mere vmesnika, odvisne od konektorja, za okvire/stojala in vtične enote (IEC 60297-3-104:2006)

General Information

Status
Published
Publication Date
15-Jun-2006
Withdrawal Date
31-May-2009
Current Stage
6060 - Document made available - Publishing
Start Date
16-Jun-2006
Completion Date
16-Jun-2006

Buy Standard

Standard
EN 60297-3-104:2007
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


6/29(16., 6,67(1

67$1'$5'
MDQXDU
0HKDQVNHVWUXNWXUHHOHNWURQVNHRSUHPH0HUHPHKDQVNLKVWUXNWXUVHULMH
PP  GHO0HUHYPHVQLNDRGYLVQHRGNRQHNWRUMD]D
RNYLUHVWRMDODLQYWLþQHHQRWH ,(&
LVWRYHWHQ(1
0HFKDQLFDOVWUXFWXUHVIRUHOHFWURQLFHTXLSPHQW'LPHQVLRQVRIPHFKDQLFDO
VWUXFWXUHVRIWKHPP LQ VHULHV3DUW&RQQHFWRUGHSHQGHQW
LQWHUIDFHGLPHQVLRQVIRUVXEUDFNVDQGSOXJLQXQLWV ,(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1 HQ
!"#$%&’( )&!*+,%- .
EUROPEAN STANDARD
EN 60297-3-104
NORME EUROPÉENNE
June 2006
EUROPÄISCHE NORM
ICS 31.240
English version
Mechanical structures for electronic equipment -
Dimensions of mechanical structures
of the 482,6 mm (19 in) series
Part 3-104: Connector dependent interface dimensions
of subracks and plug-in units
(IEC 60297-3-104:2006)
Structures mécaniques pour équipements Bauweisen für elektronische
électroniques - Einrichtungen -
Dimensions des structures mécaniques Maße der 482,6-mm-(19-in-)Bauweise
de la série de 482,6 mm (19 in) Teil 3-104: Steckverbinderabhängige
Partie 3-104: Dimensions de l'interface Schnittstellenmaße für
des bacs et blocs enfichables en fonction Baugruppenträger und Baugruppen
du connecteur (IEC 60297-3-104:2006)
(CEI 60297-3-104:2006)
This European Standard was approved by CENELEC on 2006-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60297-3-104:2006 E

Foreword
The text of document 48D/337/FDIS, future edition 1 of IEC 60297-3-104, prepared by SC 48D,
Mechanical structures for electronic equipment, of IEC TC 48, Electromechanical components and
mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60297-3-104 on 2006-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60297-3-104:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60297-3-104:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60297-3-101 - Mechanical structures for electronic EN 60297-3-101 2004
equipment - Dimensions of mechanical
structures of the 482,6 mm (19 in) series -
Part 3-101: Subracks and associated plug-in
units
IEC 60603-2 1995 Connectors for frequencies below 3 MHz for EN 60603-2 1998
use with printed boards -
Part 2: Detail specification for two-part
connectors with assessed quality, for printed
boards, for basic grid of 2,54 mm (0,1 in) with
common mounting features
1) 2)
IEC 60917-1 - Modular order for the development of EN 60917-1 1998
mechanical structures for electronic
equipment practices -
Part 1: Generic standard
IEC 61076-4-101 2001 Connectors for electronic equipment - EN 61076-4-101 2001
+ corr. November 2003 Part 4-101: Printed board connectors with
assessed quality - Detail specification for two-
part connector modules, having a basic grid
of 2,0 mm for printed boards and backplanes
in accordance with IEC 60917
IEC 61076-4-113 2002 Connectors for electronic equipment - EN 61076-4-113 2003
Printed board connectors -
Part 4-113: Detail specification for two-part
connectors having 5 rows with a grid of
2,54 mm for printed boards and backplanes
in bus applications
1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE
IEC
60297-3-104
INTERNATIONAL
Première édition
STANDARD
First edition
2006-05
Structures mécaniques pour équipements
électroniques – Dimensions des structures
mécaniques de la série 482,6 mm (19 in) –
Partie 3-104:
Dimensions de l'interface des bacs et blocs
enfichables en fonction du connecteur

Mechanical structures for electronic equipment –
Dimensions of mechanical structures
of the 482,6 mm (19 in) series –
Part 3-104:
Connector dependent interface dimensions
of subracks and plug-in units
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
N
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60297-3-104  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope and object.9
2 Normative references .9
3 Terms and definitions .9
4 Arrangement overview.11
5 Depth dimensions overview .13
6 Depth dimensions of front-mounted plug-in units .15
7 Depth dimensions of rear mounted printed board type plug-in units within subrack
type A.17
8 Depth dimensions of rear mounted plug-in modules within subrack type B.19
9 Depth dimensions of rear-mounted plug-in modules within subrack type A,
mixed connectors .21
10 Depth dimensions of rear-mounted plug-in modules within subrack type B,
mixed connectors .23
11 Backplane dimensions.25
11.1 Backplane height and width dimensions, using connectors type IEC 60603-2
and IEC 61076-4-113 .25
11.2 Backplane height and width dimensions, using connectors type IEC 61076-4-101 .27
11.3 Backplane dimensions, general .29
11.4 Height dimensions.29

Figure 1 – Arrangement overview .11
Figure 2 – Definition of the depth dimensions, typical 3 U subrack.13
Figure 3 – Depth dimensions of front-mounted board-type plug-in units .15
Figure 4 – Depth dimensions of rear-mounted board-type plug-in units within subracks
type A .17
Figure 5 – Depth dimensions of rear mounted board type plug-in units within subracks
type B .19
Figure 6 – Depth dimensions of rear-mounted board-type plug-in units within subracks
type A, mixed connector application.21
Figure 7 – Depth dimensions of rear-mounted board-type plug-in units within subracks
type B, mixed connector applications .23
Figure 8 – Backplane dimensions using connectors type IEC 60603-2 and
IEC 61076-4-113 .25
Figure 9 – Backplane dimensions using connectors type IEC 61076-4-101 .27
Figure 10 – Backplane dimensions, general.29

Table 1 – Height dimensions.29

60297-3-104  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
DIMENSIONS OF MECHANICAL STRUCTURES
OF THE 482,6 mm (19 in) SERIES –

Part 3-104: Connector dependent interface dimensions
of subracks and plug-in units
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.