EN 60875-1:2010
(Main)Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
IEC 60875-1:2010(E) applies to non-wavelength-selective fibre optic branching devices which are passive (they contain no optoelectronic or other transducing elements) and have three or more ports for the entry and/or exit of optical power which is shared among these ports in a predetermined fashion. This fifth edition cancels and replaces the fourth edition published in 2000. It constitutes a technical revision. The changes with respect to the previous edition are to delete the clause of Quality assessment procedures and reconsider the constitution of this standard.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - wellenlängenunabhängige Lichtwellenleiter-Verzweiger - Teil 1: Fachgrundspezifikation
Dispositifs d’interconnexion et composants passifs à fibres optiques - Dispositifs de couplage pour fibres optiques ne dépendant pas de la longueur d’onde - Partie 1: Spécification générique
La CEI 60875-1:2010 s'applique aux dispositifs de couplage pour fibres optiques qui ne dépendent pas de la longueur d'onde. Tous présentent les caractéristiques suivantes: - ils sont passifs, au sens où ils ne contiennent aucun élément optoélectronique ou transducteur; - ils ont trois ports ou plus pour l'entrée et/ou la sortie de la puissance optique, et ils partagent la puissance optique parmi ces ports, selon une modalité spécifiée; les ports sont des fibres optiques ou des connecteurs à fibres optiques. Cette cinquième édition annule et remplace la quatrième édition parue en 2000 et constitue une révision technique. Les modifications par rapport à l'édition précédente sont la suppression de l'article concernant les procédures d'assurance de la qualité et une reconsidération de la structure de la présente norme. Cette version bilingue (2010-10) remplace la version monolingue anglaise.
Optični spojni elementi in pasivne komponente - Valovnodolžinsko neselektivni optični sklopniki - 1. del: Rodovna specifikacija (IEC 60875-1:2010)
Ta del IEC 60875 velja za valovnodolžinsko neselektivne optične sklopnike z naslednjimi lastnostmi:
– so pasivni, saj ne vsebujejo nobenih optoelektronskih ali drugih pretvorniških elementov;
- imajo tri ali več priključnih odprtin za vstop in/ali izstop optične moči; optična moč se deli med te priključne odprtine na vnaprej določen način;
- te priključne odprtine so optična vlakna ali konektorji optičnih vlaken.
Ta standard vzpostavlja enotne zahteve za optične, mehanične in okoljske
lastnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2010
1DGRPHãþD
SIST EN 60875-1:2002
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9DORYQRGROåLQVNRQHVHOHNWLYQL
RSWLþQLVNORSQLNLGHO 5RGRYQDVSHFLILNDFLMD ,(&
Fibre optic interconnecting devices and passive components - Non-wavelength-selective
fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile -
wellenlängenunabhängige Lichtwellenleiter-Verzweiger - Teil 1: Fachgrundspezifikation
(IEC 60875-1:2010)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Dispositifs de
couplage pour fibres optiques ne dépendant pas de la longueur d’onde - Partie 1:
Spécification générique (CEI 60875-1:2010)
Ta slovenski standard je istoveten z: EN 60875-1:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60875-1
NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 60875-1:2001
English version
Fibre optic interconnecting devices and passive components -
Non-wavelength-selective fibre optic branching devices -
Part 1: Generic specification
(IEC 60875-1:2010)
Dispositifs d’interconnexion Lichtwellenleiter - Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Dispositifs de couplage pour fibres wellenlängenunabhängige
optiques ne dépendant pas de la longueur Lichtwellenleiter-Verzweiger -
d’onde - Teil 1: Fachgrundspezifikation
Partie 1: Spécification générique (IEC 60875-1:2010)
(CEI 60875-1:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60875-1:2010 E
Foreword
The text of document 86B/2986/FDIS, future edition 5 of IEC 60875-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60875-1 on 2010-07-01.
This European Standard supersedes EN 60875-1:2001.
This EN 60875-1:2010 constitutes a technical revision. The changes with respect to EN 60875-1:2001 are
to delete the clause of Quality assessment procedures and reconsider the constitution of this standard.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60875-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 series NOTE Harmonized in EN 60068 series (not modified).
IEC 60874 series NOTE Harmonized in EN 60874 series (not modified).
IEC 60869-1 NOTE Harmonized as EN 60869-1.
IEC 60974 series NOTE Harmonized in EN 60974 series (partially modified).
IEC 61300-1 NOTE Harmonized as EN 61300-1.
IEC 61300-2 series NOTE Harmonized in EN 61300-2 series (not modified).
IEC 61300-3 series NOTE Harmonized in EN 61300-3 series (not modified).
IEC 61753 NOTE Harmonized as EN 61753.
IEC 61754-4 NOTE Harmonized as EN 61754-4.
IEC 61754-13 NOTE Harmonized as EN 61754-13.
IEC 61754-15 NOTE Harmonized as EN 61754-15.
IEC 62005 series NOTE Harmonized in EN 62005 series (not modified).
__________
- 3 - EN 60875-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 731: Optical fibre communication
IEC 60617-SN - Graphical symbols for diagrams - -
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60825 Series Safety of laser products EN 60825 Series
IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
IEC/TR 61930 - Fibre optic graphical symbology - -
IEC Guide 102 - Electronic components - Specification - -
structures for quality assessment
(Qualification approval and capability
approval)
IECQ 01 - IEC Quality Assessment System - -
for Electronic Components (IECQ) - Basic
Rules
IECQ 001002-3 - IEC Quality Assessment System - -
for Electronic Components (IECQ) - Rules of
Procedure - Part 3: Approval procedures
ISO 129-1 - Technical drawings - Indication of dimensions - -
and tolerances -
Part 1: General principles
ISO 286-1 - ISO system of limits and fits - EN ISO 286-1 -
Part 1: Bases of tolerances, deviations
and fits
ISO 1101 - Geometrical Product Specifications (GPS) - EN ISO 1101 -
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEC 60875-1 ®
Edition 5.0 2010-04
INTERNATIONAL
STANDARD
colour
inside
Fibre optic interconnecting devices and passive components – Non-wavelength-
selective fibre optic branching devices –
Part 1: Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 33.180.20 ISBN 978-2-88910-315-7
– 2 – 60875-1 © IEC:2010(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references.6
3 Terms and definitions .7
3.1 Basic term definitions .7
3.2 Component definitions .8
3.3 Performance parameter definitions .9
4 Requirements .10
4.1 Classification.10
4.1.1 General .10
4.1.2 Types .11
4.1.3 Style .11
4.1.4 Variant.12
4.1.5 Assessment level.12
4.1.6 Normative reference extensions .13
4.2 Documentation .14
4.2.1 Symbols.14
4.2.2 Specification system .14
4.2.3 Drawings .15
4.2.4 Measurements .16
4.2.5 Test data sheets .16
4.2.6 Instructions for use .16
4.3 Standardization system.16
4.3.1 Interface standards .16
4.3.2 Performance standards.17
4.3.3 Reliability standards.17
4.3.4 Interlinking.18
4.4 Design and construction .19
4.4.1 Materials.19
4.4.2 Workmanship .20
4.5 Quality.20
4.6 Performance requirements.20
4.7 Identification and marking.20
4.7.1 General .20
4.7.2 Variant identification number.20
4.7.3 Component marking.20
4.7.4 Package marking .21
4.8 Safety.21
Annex A (informative) Examples of technology of fibre optic branching devices.22
Bibliography .24
Figure 1 – Non-wavelength-selective branching device .11
Figure 2 – Non-wavelength-selective branching device .11
Figure 3 – Non-wavelength-selective branching device .12
Figure 4 – Non-wavelength-selective branching device .12
Figure 5 – Standards.19
60875-1 © IEC:2010(E) – 3 –
Figure A.1 – FBT fibre.22
Figure A.2 – PLC by chemical vapour deposition .22
Figure A.3 – PLC by ion-exchange .23
Table 1 – Three-level IEC specification structure .14
Table 2 – Standards interlink matrix .19
Table 3 – Quality assurance options .19
– 4 – 60875-1 © IEC:2010(E)
INTERNATIONAL ELECTROTEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.