EN 60875-1:2001
(Main)Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
Applicable to non-wavelength-selective fibre optic branching devices which are passive (they contain no optoelectronic or other transducing elements) and have three or more ports for the entry and/or exit of optical power which is shared among these ports in a predetermined fashion.
Lichtwellenleiter-Verzweiger (Wellenlängenunabhängig) - Teil 1: Fachgrundspezifikation
Dispositifs de couplage pour fibres optiques ne dépendant pas de la longueur d'onde - Partie 1: Spécification générique
Applicable aux dispositifs de couplage pour fibres optiques qui ne dépendent pas de la longueur d'onde, sont passifs (ne contiennent aucun élément optoélectronique ou transducteur) et ont trois portes ou plus pour l'entrée et/ou la sortie de la puissance optique qu'ils partagent parmi ces portes selon une modalité spécifiée.
Non-wavelenght-selective fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60875-1:2002
prva izdaja
STANDARD
september 2002
Non-wavelenght-selective fibre optic branching devices - Part 1: Generic
specification (IEC 60875-1:2000)
ICS 33.180.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60875-1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2001
ICS 33.180.20 Supersedes EN 60875-1:1998
English version
Non-wavelength-selective fibre optic branching devices
Part 1: Generic specification
(IEC 60875-1:2000)
Dispositifs de couplage pour fibres Lichtwellenleiter-Verzweiger
optiques ne dépendant pas (Wellenlängenunabhängig)
de la longueur d'onde Teil 1: Fachgrundspezifikation
Partie 1: Spécification générique (IEC 60875-1:2000)
(CEI 60875-1:2000)
This European Standard was approved by CENELEC on 2000-11-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60875-1:2001 E
Foreword
The text of document 86B/1361/FDIS, future edition 4 of IEC 60875-1, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60875-1 on 2000-11-01.
This European Standard supersedes EN 60875-1:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-11-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60875-1:2000 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 NOTE: Harmonized in the EN 60068 and HD 323 series (not modified).
IEC 60874 NOTE: Partly harmonized as EN 60874 series.
IEC 61753 NOTE: Partly harmonized as EN 61753 series.
IEC 61754-2 NOTE: Harmonized as EN 61754-2:1997 (not modified).
IEC 61754-4 NOTE: Harmonized as EN 61754-4:1997 (not modified).
IEC 61754-13 NOTE: Harmonized as EN 61574-13:1999 (not modified).
IEC 62005 NOTE: Harmonized as EN 62005 series.
__________
- 3 - EN 60875-1:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC QC 001001 1998 Basic rules of the IEC Quality Assessment--
System for Electronic Components (IECQ)
IEC QC 001002 Series IEC Quality Assessment System for --
Electronic Components (IECQ) - Rules of
Procedure
IEC 60027 Series Letter symbols to be used in electrical--
technology
IEC 60050-731 1991 International Electrotechnical Vocabulary--
(IEV)
Chapter 731: Optical fibre communication
IEC 60410 1973 Sampling plans and procedures for --
inspection by attributes
IEC 60617-12 1997 Graphical symbols for diagrams EN 60617-12 1998
Part 12: Binary logic elements
IEC 60695-2-2 1991 Fire hazard testing EN 60695-2-2 1994
Part 2: Test methods
Section 2: Needle-flame test
IEC 60825 Series Safety of laser products EN 60825 Series
NORME
CEI
INTERNATIONALE IEC
60875-1
INTERNATIONAL
QC 810000
STANDARD
Quatrième édition
Fourth edition
2000-11
Dispositifs de couplage pour fibres optiques
ne dépendant pas de la longueur d'onde –
Partie 1:
Spécification générique
Non-wavelength-selective fibre optic
branching devices –
Part 1:
Generic specification
© IEC 2000 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
V
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60875-1 © IEC:2000 – 3 –
CONTENTS
Page
FOREWORD . 7
INTRODUCTION . 11
Clause
1 General. 13
1.1 Scope . 13
1.2 Normative references. 13
1.3 Definitions. 15
2 Requirements. 23
2.1 Classification . 23
2.1.1 Type . 23
2.1.2 Style . 23
2.1.3 Variant . 25
2.1.4 Environmental category . 25
2.1.5 Assessment level . 27
2.1.6 Normative reference extensions . 29
2.2 Documentation. 31
2.2.1 Symbols . 31
2.2.2 Specification system. 31
2.2.3 Drawings. 33
2.2.4 Tests and measurements . 35
2.2.5 Test data sheets . 35
2.2.6 Instructions for use. 37
2.3 Standardization system . 37
2.3.1 Interface standards . 37
2.3.2 Performance standards . 37
2.3.3 Reliability standards . 39
2.3.4 Interlinking . 41
2.4 Design and construction. 43
2.4.1 Materials . 43
2.4.2 Workmanship. 43
2.5 Quality . 43
2.6 Performance . 43
2.7 Identification and marking . 45
2.7.1 Variant identification number . 45
2.7.2 Component marking . 45
2.7.3 Package marking . 45
2.8 Packaging. 47
2.9 Storage conditions . 47
2.10 Safety . 47
3 Quality assessment procedures. 47
3.1 Primary stage of manufacture. 47
3.2 Structurally similar components. 47
60875-1 © IEC:2000 – 5 –
Clause Page
3.3 Qualification approval procedures . 49
3.3.1 Fixed sample procedure . 49
3.3.2 Lot-by-lot and periodic procedure . 49
3.3.3 Qualifying specimen . 49
3.3.4 Sample size . 51
3.3.5 Preparation of specimens . 51
3.3.6 Qualification testing. 51
3.3.7 Qualification failures. 51
3.3.8 Maintenance of qualification approval . 51
3.3.9 Qualification report. 53
3.4 Quality conformance inspection. 53
3.4.1 Lot-by-lot inspection . 53
3.4.2 Periodic inspection . 53
3.5 Certified records of released lots. 55
3.6 Delayed deliveries. 57
3.7 Delivery release before completion of group B tests. 57
3.8 Alternative test methods. 57
3.9 Unchecked parameters . 57
Annex A (informative) Examples of fibre optic branching device types . 59
Bibliography . . 67
60875-1 © IEC:2000 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________
NON-WAVELENGTH-SELECTIVE FIBRE OPTIC
BRANCHING DEVICES –
Part 1: Generic specification
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.