prEN IEC 61753-021-02:2022
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 021-02: Single-mode fibre optic connectors terminated as pigtails and patchcords for category C ? Controlled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 021-02: Single-mode fibre optic connectors terminated as pigtails and patchcords for category C ? Controlled environment
D133/C027: for all CLC/TC 86BXA revisions of standards, the dow is set to dow= dor + 12 months
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 021-02: Connecteurs à fibres optiques unimodales raccordés comme des fibres amorces ou des cordons de brassage pour la catégorie C – Environnement contrôlé
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 021-02. del: Konektorji za enorodovna optična vlakna, zaključeni kot repki ali povezovalne vrvice za kategorijo C - Nadzorovano okolje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61753-021-02:2022
01-oktober-2022
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 021-02. del:
Konektorji za enorodovna optična vlakna, zaključeni kot repki ali povezovalnevrvice za kategorijo C - Nadzorovano okolje
Fibre optic interconnecting devices and passive components - Performance standard -
Part 021-02: Single-mode fibre optic connectors terminated as pigtails and patchcords
for category C - Controlled environmentDispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 021-02: Connecteurs à fibres optiques unimodales raccordés comme des fibres
amorces ou des cordons de brassage pour la catégorie C – Environnement contrôléTa slovenski standard je istoveten z: prEN IEC 61753-021-02:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-021-02:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 61753-021-02:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61753-021-02:2022
86B/4630/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-021-02 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-08-12 2022-11-04
SUPERSEDES DOCUMENTS:
86B/4575/CD, 86B/4593A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.TITLE:
Fibre optic interconnecting devices and passive components - Performance standard - Part 021-02:
Single-mode fibre optic connectors terminated as pigtails and patchcords for category C –
Controlled environmentPROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 2 – 86B/4630/CDV
1 CONTENTS
2 FOREWORD ........................................................................................................................... 3
3 1 Scope .............................................................................................................................. 5
4 2 Normative references ...................................................................................................... 5
5 3 Terms and definitions ...................................................................................................... 7
6 4 Tests ............................................................................................................................... 8
7 5 Test report ....................................................................................................................... 8
8 6 Reference components .................................................................................................... 8
9 7 Performance requirements .............................................................................................. 8
10 7.1 General ................................................................................................................... 8
11 7.2 Dimensions ............................................................................................................. 8
12 7.3 Sample size and test sequencing ............................................................................ 9
13 7.4 Endface geometry ................................................................................................... 9
14 7.5 Visual examination .................................................................................................. 9
15 7.6 Performance criteria ............................................................................................... 9
16 7.7 Performance details .............................................................................................. 11
17 Annex A (normative) Sample size ....................................................................................... 17
18 Annex B (normative) Visual examination of outer cable sheath movement .......................... 18
19 B.1 Scope ................................................................................................................... 18
20 B.2 Preparation of the sample and initial visual examination ....................................... 18
21 B.3 Final visual examination of outer cable sheath movement ..................................... 18
22 Bibliography .......................................................................................................................... 19
24 Figure 1 – Pigtail test sample .................................................................................................. 7
25 Figure 2 – Patchcord test sample ............................................................................................ 8
26 Figure B.1 – Example of initial marking of the cable sheath .................................................. 18
27 Figure B.2 – Example of final visual examination .................................................................. 18
29 Table 1 – Pass/Fail criteria ................................................................................................... 10
30 Table 2 – Performance test details ........................................................................................ 12
31 Table A.1 – Sample size ....................................................................................................... 17
---------------------- Page: 4 ----------------------oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 3 – 86B/4630/CDV
36 INTERNATIONAL ELECTROTECHNICAL COMMISSION
37 ____________
39 FIBRE OPTIC INTERCONNECTING DEVICES
40 AND PASSIVE COMPONENTS – PERFORMANCE STANDARD –
42 Part 021-02: Single-mode fibre optic connectors terminated as pigtails
43 and patchcords for category C – Controlled environment
45 FOREWORD
46 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
47 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
48 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
49 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
50 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
51 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
52 in the subject dealt with may participate in this preparatory work. International, governmental and non-
53 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
54 with the International Organization for Standardization (ISO) in accordance with conditions determined by
55 agreement between the two organizations.56 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
57 consensus of opinion on the relevant subjects since each technical committee has representation from all
58 interested IEC National Committees.59 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
60 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
61 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
62 misinterpretation by any end user.63 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
64 transparently to the maximum extent possible in their national and regional publications. Any divergence
65 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
66 the latter.67 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
68 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
69 services carried out by independent certification bodies.70 6) All users should ensure that they have the latest edition of this publication.
71 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
72 members of its technical committees and IEC National Committees for any personal injury, property damage or
73 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
74 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
75 Publications.76 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
77 indispensable for the correct application of this publication.78 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
79 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
80 IEC 61753-021-02 has been prepared by subcommittee 86B: Fibre optic interconnecting
81 devices and passive components, of IEC technical committee 86: Fibre optics. It is an
82 International Standard.83 This first edition cancels and replaces the second edition of IEC 61753-021-2 published in
84 2007. This edition constitutes a technical revision.85 This edition includes the following significant technical changes with respect to the previous
86 edition:87 a) changed scope to remove restrictions on attenuation and return loss grades;
88 b) include provisions for rectangular ferrule connectors;---------------------- Page: 5 ----------------------
oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 4 – 86B/4630/CDV
89 c) changed the term and definitions of the different types of test samples (pigtail test
90 samples and patchcord test samples) used in the various tests to avoid confusion;
91 d) updated fibre naming conventions according to IEC 60793-2-50:2018 and add provisions
92 for B-657 fibres;93 e) added all the attenuation and return loss grades defined in IEC 61753-1;
94 f) test severities updated according to IEC 61753-1:2018;
95 g) reduced flexing of strain relief cycles from 100 cycles to 50 cycles;
96 h) added the torsion test;
97 i) reduced the duration of the fibre/cable retention test on reinforced cables from 120 s to
98 60 s minimum;99 j) removed the static side load test;
100 k) reduced the number of mating durability cycles from 500 cycles to 200 cycles and added
101 provisions for rectangular ferrule connectors;102 l) added Annex B for visual examination of the outer cable sheath movement of reinforced
103 cables as an additional requirement for change of temperature, cable retention and flexing
104 of the strain relief tests.105 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
106
107 Full information on the voting for its approval can be found in the report on voting indicated in
108 the above table.109 The language used for the development of this International Standard is English.
110 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
111 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
112 available at www.iec.ch/members_experts/refdocs. The main document types developed by
113 IEC are described in greater detail at www.iec.ch/standardsdev/publications.114 A list of all parts of the IEC 61753 series, published under the general title Fibre optic
115 interconnecting devices and passive components – Performance standard, can be found on
116 the IEC website.117 The committee has decided that the contents of this document will remain unchanged until the
118 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
119 the specific document. At this date, the document will be120 • reconfirmed,
121 • withdrawn,
122 • replaced by a revised edition, or
123 • amended.
124
125
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 5 – 86B/4630/CDV
126 FIBRE OPTIC INTERCONNECTING DEVICES
127 AND PASSIVE COMPONENTS – PERFORMANCE STANDARD –
128
129 Part 021-02: Single-mode fibre optic connectors terminated as pigtails
130 and patchcords for category C – Controlled environment
131
132
133
134 1 Scope
135 This part of IEC 61753 defines the minimum initial test and measurement requirements and
136 severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord
137 satisfies in order to be categorized as meeting the IEC standard category C (controlled
138 environment), as defined in IEC 61753-1.139 2 Normative references
140 The following documents are referred to in the text in such a way that some or all of their
141 content constitutes requirements of this document. For dated references, only the edition
142 cited applies. For undated references, the latest edition of the referenced document (including
143 any amendments) applies.144 IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
145 class B single-mode fibres146 IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for
147 simplex and duplex cables for use in terminated cable assemblies148 IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and
149 measurement procedures – Part 1: General and guidance150 IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
151 measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)152 IEC 61300-2-2, Fibre optic interconnecting devices and passive components – Basic test and
153 measurement procedures – Part 2-2: Tests – Mating durability154 IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
155 measurement procedures – Part 2-4: Tests – Fibre or cable retention156 IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
157 measurement procedures – Part 2-5: Tests - Torsion158 IEC 61300-2-6, Fibre optic interconnecting devices and passive components – Basic test and
159 measurement procedures – Part 2-6: Tests – Tensile strength of coupling mechanism
160 IEC 61300-2-12, Fibre optic interconnecting devices and passive components – Basic test
161 and measurement procedures – Part 2-12: Tests – Impact162 IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test
163 and measurement procedures – Part 2-17: Tests – Cold---------------------- Page: 7 ----------------------
oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 6 – 86B/4630/CDV
164 IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test
165 and measurement procedures – Part 2-18: Tests – Dry heat166 IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test
167 and measurement procedures – Part 2-19: Tests – Damp heat (steady state)168 IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test
169 and measurement procedures – Part 2-22: Tests – Change of temperature170 IEC 61300-2-44, Fibre optic interconnecting devices and passive components – Basic test
171 and measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic
172 devices173 IEC 61300-3-1, Fibre optic interconnecting devices and passive components – Basic test and
174 measurement procedures – Part 3-1: Examinations and measurements – Visual examination
175 IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
176 measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
177 changes in attenuation and return loss178 IEC 61300-3-4, Fibre optic interconnecting devices and passive components – Basic test and
179 measurement procedures – Part 3-4: Examinations and measurements – Attenuation
180 IEC 61300-3-6, Fibre optic interconnecting devices and passive components – Basic test and
181 measurement procedures – Part 3-6: Examinations and measurements – Return loss
182 IEC 61300-3-28, Fibre optic interconnecting devices and passive components – Basic test
183 and measurement procedures – Part 3-28: Examinations and measurements – Transient loss
184 IEC 61300-3-34, Fibre optic interconnecting devices and passive components – Basic test
185 and measurement procedures – Part 3-34: Examinations and measurements – Attenuation of
186 random mated connectors187 IEC 61300-3-45, Fibre optic interconnecting devices and passive components – Basic test
188 and measurement procedures – Part 3-45: Examinations and measurements – Attenuation of
189 random mated multi-fibre connectors190 IEC 61753-1, Fibre optic interconnecting devices and passive components – Performance
191 standard – Part 1: General and guidance192 IEC 61754 (all parts), Fibre optic interconnecting devices and passive components – Fibre
193 optic connector interfaces194 IEC 61755 (all parts), Fibre optic interconnecting devices and passive components – Fibre
195 optic connector optical interfaces196 IEC 61755-2 (all parts), Fibre optic interconnecting devices and passive components – Fibre
197 optic connector optical interfaces – Part 2: Optical interface198 IEC 61755-3 (all parts), Fibre optic interconnecting devices and passive components – Fibre
199 optic connector optical interfaces – Part 3: Optical interface200 ISO/IEC 11801 (all parts), Information technology – Generic cabling for customer premises
---------------------- Page: 8 ----------------------oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 7 – 86B/4630/CDV
201 3 Terms and definitions
202 For the purposes of this document, the terms and definitions given in IEC 61753-1 and the
203 following apply.204 ISO and IEC maintain terminological databases for use in standardization at the following
205 addresses:206 • ISO Online browsing platform: available at https://www.iso.org/obp
207 • IEC Electropedia: available at http://www.electropedia.org/
208 3.1
209 change in attenuation
210 δ
211 ± deviation from the original value of the transmitted power at the start of the test
212 3.2213 sample
214 complete set of connector components required to provide demountable coupling between
215 one or more pairs of optical fibres216 3.3
217 pigtail test sample
218 two pigtails mated with an adaptor
219 Note 1 to entry: See Figure 1.
220
Adaptor
Pigtail
Pigtail
221
222 Figure 1 – Pigtail test sample
223 3.4
224 patchcord test sample
225 patchcord mated to two pigtails using adaptors
226 Note 1 to entry: See Figure 2.
227
---------------------- Page: 9 ----------------------
oSIST prEN IEC 61753-021-02:2022
IEC CDV 61753-021-02/Ed1 IEC:2022 – 8 – 86B/4630/CDV
Adaptor Adaptor
Pigtail
Pigtail
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.