EN 62343-1-2:2008

Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)

This part of IEC 62343 contains the minimum initialisation test and measurement requirements and severities, which an optical dynamic chromatic dispersion compensator (DCDC) shall satisfy in order to be categorised as meeting the requirements of DCDC used in controlled environments. The requirements cover optical dynamic chromatic dispersion compensators for Category C - Controlled environments.

Dynamische Module - Teil 1-2: Betriebsverhaltensnormen - Dynamischer Kompensator für chromatische Dispersion mit Anschlussfasern für den Einsatz in kontrollierter Umgebung (Kategorie C)

Modules dynamiques - Partie 1-2: Normes de qualité de fonctionnement - Compensateur de dispersion chromatique dynamique avec fibres-amorces, pour usage en environnements contrôlés (Catégorie C)

La présente partie de la CEI 62343 contient les sévérités et les exigences minimales d'essai et de mesure initiales, qu'un compensateur de dispersion chromatique dynamique optique (CDCD) doit satisfaire afin d'être classé comme conforme aux exigences d'un CDCD utilisé dans des environnements contrôlés. Les exigences couvrent les compensateurs de dispersion chromatique dynamiques optiques pour la catégorie C - Environnements contrôlés.

Dinamični moduli - 1-2. del: Tehnični standardi - Dinamični kompenzator barvne disperzije z viticami za uporabo v nadzorovanih okoljih (Kategorija C) (IEC 62343-1-2:2007)

General Information

• Status: Withdrawn
• Publication Date: 29-Jul-2008
• Withdrawal Date: 31-May-2011
• ICS: 33.180.30 - Optic amplifiers
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Jul-2018
• Completion Date: 30-Jul-2018
• Ref Project: SIST EN 62343-1-2:2008 - Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)

Relations

• Replaced By: EN 62343-1-2:2015 - Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
• Effective Date: 12-Jun-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2008
'LQDPLþQLPRGXOLGHO7HKQLþQLVWDQGDUGL'LQDPLþQLNRPSHQ]DWRUEDUYQH
GLVSHU]LMH]YLWLFDPL]DXSRUDERYQDG]RURYDQLKRNROMLK.DWHJRULMD&,(&

Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion
compensator with pigtails for use in controlled environments (Category C) (IEC 62343-1-
2:2007)
Dynamische Module - Teil 1-2: Betriebsverhaltensnormen - Dynamischer Kompensator
für chromatische Dispersion mit Anschlussfasern für den Einsatz in kontrollierter
Umgebung (Kategorie C) (IEC 62343-1-2:2007)
Modules dynamiques - Partie 1-2: Normes de qualité de fonctionnement - Compensateur
de dispersion chromatique dynamique avec fibres-amorces, pour usage en
environnements contrôlés (Catégorie C) (CEI 62343-1-2:2007)
Ta slovenski standard je istoveten z: EN 62343-1-2:2008
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62343-1-2
NORME EUROPÉENNE
July 2008
EUROPÄISCHE NORM
ICS 33.180.30
English version
Dynamic modules -
Part 1-2: Performance standards -
Dynamic chromatic dispersion compensator with pigtails
for use in controlled environments (Category C)
(IEC 62343-1-2:2007)
Modules dynamiques -  Dynamische Module -
Partie 1-2: Normes de qualité Teil 1-2: Betriebsverhaltensnormen -
de fonctionnement - Dynamischer Kompensator
Compensateur de dispersion chromatique für chromatische Dispersion
dynamique avec fibres-amorces, mit Anschlussfasern für den Einsatz
pour usage en environnements contrôlés in kontrollierter Umgebung (Kategorie C)
(Catégorie C) (IEC 62343-1-2:2007)
(CEI 62343-1-2:2007)
This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62343-1-2:2008 E
Foreword
The text of document 86C/698/CDV, future edition 1 of IEC 62343-1-2, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel
Unique Acceptance Procedure and was approved by CENELEC as EN 62343-1-2 on 2008-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62343-1-2:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61753-022-2 NOTE  Harmonized as EN 61753-022-2:2003 (not modified).
__________
- 3 - EN 62343-1-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
1) 2)
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 1999
passive components - Basic tests and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependence of attenuation in a
single-mode fibre optic device

1) 2)
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 2006
passive components - Basic test and + corr. November 2006
measurement procedures -
Part 3-29: Examinations and measurements -
Measurement techniques for characterising
the amplitude of the spectral transfer function
of DWDM components
1) 2)
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 2006
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

1) 2)
IEC 61753-021-2 - Fibre optic interconnecting devices and EN 61753-021-2 2008
passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic
connectors for category C - Controlled
environment
1)
ITU-T - Transmission characteristics of optical - -
Recommendation components and subsystems
G.671
1)
ITU-T - Optical interfaces for multichannel systems - -
Recommendation with optical amplifiers
G.692
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1)
ITU-T - Optical system design and engineering - -
Recommendation considerations
G.Sup39
INTERNATIONAL IEC
STANDARD
CEI
62343-1-2
NORME
First edition
INTERNATIONALE
Première édition
2007-07
Dynamic modules –
Part 1-2:
Performance standards –
Dynamic chromatic dispersion
compensator with pigtails for use
in controlled environments (Category C)

Modules dynamiques –
Partie 1-2:
Normes de qualité de fonctionnement –
Compensateur de dispersion chromatique
dynamique avec fibres-amorces, pour usage
en environnements contrôlés (Catégorie C)
PRICE CODE
L
CODE PRIX
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
Pour prix, voir catalogue en vigueur

– 2 – 62343-1-2 © IEC:2007
CONTENTS
FOREWORD.3

1 Scope.5
2 Normative references .5
3 Terms and definitions .6
4 Test.6
4.1 General .6
4.2 Module .6
4.3 Spectral bands .7
5 Test report.7
6 Reference modules .7
7 Performance requirements .7
7.1 Dimensions .7
7.2 Sample size .7
7.3 Test details and requirements .8

Bibliography.10

Table 1 – Spectral bands for single-mode systems (ITU-T G. Sup39).7
Table 2 – Test and requirements for type A (Multi/single channel type DCDC with
large dispersion variable range).8
Table 3 – Test and requirements for type B (Multi/single channel type DCDC with
standard dispersion variable range) .9

62343-1-2 © IEC:2007 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
Part 1-2: Performance standards –
Dynamic chromatic dispersion compensator
with pigtails for use in controlled environments
(Category C)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62343-1-2 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
CDV Result of voting
86C/698/CDV 86C/755/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 62343-1-2 © IEC:2007
A list of all parts of IEC 62343 series, under the general title Dynamic modules, can be found
on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site und
...