EN 61755-3-8:2009

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre

IEC 61755-3-8:2009 defines dimensional limits and material properties of a 2,5 mm and a 1,25 mm diameter cylindrical composite ferrule optical interface to meet specific requirements for APC fibre-to-fibre interconnection. The composite ferrule uses different materials in the end face contact zone and in ferrule to sleeve contact zone. The specified materials for each zone are zirconia (ZrO2) for the ferrule to sleeve contact zone and titanium for the end face contact zone. Ferrules made from the material specified in this standard are suitable for use in categories C, U, E and O as defined in IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Optische Schnittstellen von Lichtwellenleiter-Steckverbindern - Teil 3-8: Optische Schnittstelle - Zylindrische 8 Grad abgeschrägte APC-Composite-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser für Einmodenfaser, mit Titan als Material für die Faserfassung, Einmoden LWL

Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces optiques de connecteurs pour fibres optiques - Partie 3-8: Interfaces optiques, férules composites cylindriques APC-angle de 8 degrés, de diamètre 2,5 mm et 1,25 mm, utilisant le titane comme matériau entourant la fibre, fibres unimodales

La CEI 61755-3-8:2009 définit les limites dimensionnelles et les propriétés du matériau d'une interface optique avec une férule cylindrique en composite de diamètre de 2,5 et 1,25 mm, afin de satisfaire aux exigences des interconnexions fibre-à-fibre APC. La férule composite met en jeu différents matériaux dans la zone de contact des extrémités de fibres, et dans la zone de contact manchon - férule. Les matériaux spécifiques pour chaque zone sont le zircone (ZrO2) pour la zone de contact férule - manchon, et le titane pour la zone de contact de l'extrémité. Les férules constituées par le matériau spécifié dans la présente norme sont adaptées à une utilisation dans les catégories C, U, E et O, telles que définies dans la CEI 61753-1.

Optični spojni elementi in pasivne komponente -Optični vmesniki konektorja optičnih vlaken - 3-8. del: Optični vmesnik, cilindrična tulka s čelom pod kotom 8 stopinj iz kompozita APC s premeroma 2,5 mm in 1,25 mm, obdajajoči material iz titanovih vlaken, enorodno vlakno (IEC 61755-3-8:2009)

General Information

• Status: Published
• Publication Date: 26-Feb-2009
• Withdrawal Date: 31-Jan-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 27-Feb-2009
• Completion Date: 27-Feb-2009
• Ref Project: SIST EN 61755-3-8:2009 - Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre (IEC 61755-3-8:2009)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61755-3-8:2009
01-maj-2009
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLYPHVQLNLNRQHNWRUMD
RSWLþQLKYODNHQGHO2SWLþQLYPHVQLNFLOLQGULþQDWXONDVþHORPSRGNRWRP
VWRSLQML]NRPSR]LWD$3&VSUHPHURPDPPLQPPREGDMDMRþLPDWHULDOL]
WLWDQRYLKYODNHQHQRURGQRYODNQR,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8
degrees angled-APC composite ferrule using titanium as fibre surrounding material,
single mode fibre (IEC 61755-3-8:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Optische Schnittstellen
von Lichtwellenleiter-Steckverbindern - Teil 3-8: Optische Schnittstelle - Zylindrische 8
Grad abgeschrägte APC-Composite-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser für
Einmodenfaser, mit Titan als Material für die Faserfassung, Einmoden LWL (IEC 61755-
3-8:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces optiques
de connecteurs pour fibres optiques - Partie 3-8: Interfaces optiques, férules composites
cylindriques APC-angle de 8 degrés, de diamètre 2,5 mm et 1,25 mm, utilisant le titane
comme matériau entourant la fibre, fibres unimodales (CEI 61755-3-8:2009)
Ta slovenski standard je istoveten z: EN 61755-3-8:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61755-3-8:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61755-3-8:2009

---------------------- Page: 2 ----------------------

SIST EN 61755-3-8:2009

EUROPEAN STANDARD
EN 61755-3-8

NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM

ICS 33.180.20

English version

Fibre optic interconnecting devices and passive components -
Fibre optic connector optical interfaces -
Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical 8 degrees angled-APC composite ferrule
using titanium as fibre surrounding material, single mode fibre
(IEC 61755-3-8:2009)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Interfaces optiques de connecteurs und passive Bauteile -
pour fibres optiques - Optische Schnittstellen
Partie 3-8: Interfaces optiques, von Lichtwellenleiter-Steckverbindern -
férules composites cylindriques Teil 3-8: Optische Schnittstelle -
APC-angle de 8 degrés, Zylindrische 8 Grad abgeschrägte
de diamètre 2,5 mm et 1,25 mm, APC-Composite-Ferrulen mit 2,5 mm
utilisant le titane comme matériau und 1,25 mm Durchmesser
entourant la fibre, fibres unimodales für Einmodenfaser, mit Titan als Material
(CEI 61755-3-8:2009) für die Faserfassung, Einmoden LWL
(IEC 61755-3-8:2009)


This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-3-8:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61755-3-8:2009
EN 61755-3-8:2009 - 2 -
Foreword
The text of document 86B/2769/FDIS, future edition 1 of IEC 61755-3-8, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61755-3-8 on 2009-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
na
...