EN 61753-091-2:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment

IEC 61753-091-2:2012 contains the minimum test and measurement requirements and severities which a fibre optic circulator as specified by IEC 62077 should satisfy in order to be categorized as meeting the requirements of circulators used in controlled environments as specified in IEC 61753-1. Keywords: fibre optic circulator

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 091-2: Nicht mit Steckverbindern versehene Einmoden-Lichtwellenleiter-Zirkulatoren mit Pigtails der Kategorie C - Kontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance -- Partie 091-2: Circulateurs à fibres optiques unimodales munis de fibres amorces non connectorisées pour la catégorie C - Environnements contrôlés

La CEI 61753-091-2:2012 contient les sévérités et les exigences minimales d'essai et de mesure auxquelles il convient qu'un circulateur à fibres optiques tel que spécifié dans la CEI 62077 satisfasse afin d'être classé comme conforme aux exigences des circulateurs utilisés dans des environnements contrôlés spécifiés dans la CEI 61753-1. Mots clé: circulateur à fibres optiques

Optični spojni elementi in pasivne komponente - Tehnični standard - 091-2. del: Svitkasti cirkulatorji za enorodna optična vlakna za kategorijo C - Nadzorovano okolje (IEC 61753-091-2:2012)

Ta del standarda IEC 61753 vsebuje minimalne zahteve za preskuse in meritve ter stopnje zahtevnosti, ki jih morajo v skladu s standardom IEC 62077 izpolnjevati cirkulatorji za optična vlakna, da ustrezajo zahtevam za cirkulatorje, ki se uporabljajo v nadzorovanem okolju v skladu s standardom IEC 61753-1. Zahteve obravnavajo svitkaste cirkulatorje brez konektorjev za enorodna optična vlakna za kategorijo C, ki se uporabljajo v nadzorovanem okolju.

General Information

• Status: Withdrawn
• Publication Date: 10-Jan-2013
• Withdrawal Date: 15-Nov-2015
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Mar-2023
• Due Date: 23-Mar-2023
• Completion Date: 23-Mar-2023
• Ref Project: SIST EN 61753-091-2:2013 - Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorised single-mode fibre optic pigtailed circulators for category C - Controlled environment (IEC 61753-091-2:2012)

Relations

• Replaced By: EN IEC 61753-091-02:2022 - Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments
• Effective Date: 05-Apr-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
6YLWNDVWLFLUNXODWRUML]DHQRURGQDRSWLþQDYODNQD]DNDWHJRULMR&1DG]RURYDQR
RNROMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 091-2: Non-connectorised single-mode fibre optic pigtailed circulators for category C
- Controlled environment (IEC 61753-091-2:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
091-2: Nicht mit Steckverbindern versehene inmoden-Lichtwellenleiter-Zirkulatoren mit
Pigtails der Kategorie C - Kontrollierte Umgebung (IEC 61753-091-2:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 091-2: Circulateurs à fibres optiques unimodales munis de fibres
amorces non connectorisées pour la catégorie C - Environnements contrôlés (CEI 61753
-091-2:2012)
Ta slovenski standard je istoveten z: EN 61753-091-2:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-091-2
NORME EUROPÉENNE
January 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 091-2: Non-connectorized single-mode fibre optic pigtailed
circulators for category C -
Controlled environment
(IEC 61753-091-2:2012)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 091-2: Circulateurs à fibres Betriebsverhalten -
optiques unimodales munis de fibres Teil 091-2: Nicht mit Steckverbindern
amorces non connectorisées pour la versehene Einmoden-Lichtwellenleiter-
catégorie C - Zirkulatoren mit Pigtails der Kategorie C -
Environnements contrôlés Kontrollierte Umgebung
(CEI 61753-091-2:2012) (IEC 61753-091-2:2012)

This European Standard was approved by CENELEC on 2012-11-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-091-2:2013 E

Foreword
The text of document 86B/3364/CDV, future edition 1 of IEC 61753-091-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-091-2:2013.

The following dates are fixed:
(dop) 2013-08-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-11-16
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61753-091-2:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-3-38 NOTE  Harmonized as EN 61300-3-38.
IEC 61753-1 NOTE  Harmonized as EN 61753-1.
IEC 62077 NOTE  Harmonized as EN 62077.

- 3 - EN 61753-091-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-2-50 2008 Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 60794-2-50 - Optical fibre cables - EN 60794-2-50 -
Part 2-50: Indoor cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power

IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
Publication Year Title EN/HD Year

IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

IEC 61753-091-2 ®
Edition 1.0 2012-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for

category C – Controlled environments

Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme

de performance –
Partie 091-2: Circulateurs à fibres optiques unimodales munis de fibres amorces

non connectorisées pour la catégorie C – Environnements contrôlés

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX M
ICS 33.180.20 ISBN 978-2-83220-334-7

– 2 – 61753-091-2 © IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report . 6
5 Performance requirements . 7
5.1 Sample size . 7
5.2 Test details and requirements . 7
Annex A (normative) Sample size . 11
Bibliography . 12

Table 1 – Single-mode spectral bands . 6
Table 2 – Test details and requirements . 7
Table A.1 – Sample size . 11

61753-091-2 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 091-2: Non-connectorized single-mode fibre optic
pigtailed circulators for category C – Controlled environments

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage
...