EN 61754-28:2012
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family
IEC 61754-28:2012 defines the standard interface dimensions for the type LF3 family of connectors.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 28: Steckverbinderfamilie der Bauart LF3
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 28: Famille de connecteurs de type LF3
La CEI 61754-28:2012 définit les dimensions d'interfaces normalisées pour la famille de connecteurs de type LF3.
Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 28. del: Konektorska družina vrste LF3 (IEC 61754-28:2012)
Ta del standarda IEC 61754 določa standardne dimenzije vmesnikov za konektorsko družino vrste LF3.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2012
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNLRSWLþQLKNRQHNWRUMHY
GHO .RQHNWRUVNDGUXåLQDYUVWH/) ,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 28: Type LF3 connector family (IEC 61754-28:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von
Lichtwellenleiter-Steckverbindern - Teil 28: Steckverbinderfamilie der Bauart LF3 (IEC
61754-28:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de
connecteurs pour fibres optiques - Partie 28: Famille de connecteurs de type LF3 (CEI
61754-28:2012)
Ta slovenski standard je istoveten z: EN 61754-28:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61754-28
NORME EUROPÉENNE
July 2012
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 28: Type LF3 connector family
(IEC 61754-28:2012)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Interfaces de connecteurs pour fibres Bauteile -
optiques - Steckgesichter von Lichtwellenleiter-
Partie 28: Famille de connecteurs de type Steckverbindern -
LF3 Teil 28: Steckverbinderfamilie der Bauart
(CEI 61754-28:2012) LF3
(IEC 61754-28:2012)
This European Standard was approved by CENELEC on 2012-06-19. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-28:2012 E
Foreword
The text of document 86B/3387/FDIS, future edition 1 of IEC 61754-28, prepared by SC 86B, "Fibre optic
interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-28:2012.
The following dates are fixed:
(dop) 2013-03-19
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-06-19
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61754-28:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
ISO 8015 NOTE Harmonized as EN ISO 8015.
- 3 - EN 61754-28:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60794-2-50 - Optical fibre cables - EN 60794-2-50 -
Part 2-50: Indoor cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 61754-28 ®
Edition 1.0 2012-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 28: Type LF3 connector family
Dispositifs d’interconnexion et composants passifs à fibres optiques –
Interfaces de connecteurs pour fibres optiques –
Partie 28: Famille de connecteurs de type LF3
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 33.180.20 ISBN 978-2-88912-077-2
– 2 – 61754-28 IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative reference . 6
3 Description . 6
4 Interfaces . 6
Annex A (informative) Panel cutout . 18
Bibliography . 19
Figure 1 – Simplex plug interface . 8
Figure 2 – APC/PC endface geometry . 9
Figure 3 – Duplex plug interface . 9
Figure 4 – Simplex adaptor interface . 12
Figure 5 – Duplex adaptor interface . 12
Figure 6 – Pin gauge for adaptor . 14
Figure 7 – Simplex active device receptacle interface . 15
Figure 8 – Duplex active device receptacle interface . 15
Figure A.1 – Simplex and duplex adaptor cutout . 18
Table 1 – Intermateability between plugs, adaptors and active device within the
IEC 61754-28 family . 7
Table 2 – Dimensions of plug connector interface (1 of 2) . 10
Table 3 – Ferrule grade table for plug connector interface . 11
Table 4 – Dimensions of the simplex and duplex adaptor interface. 13
Table 5 – Gauge pin dimensions . 14
Table 6 – Dimensions of active device interface . 16
Table 7 – Grade table. 17
Table A.1 – Dimensions of the simplex and duplex adaptor cutout . 18
61754-28 IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –
Part 28: Type LF3 connector family
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
International Standard IEC 61754-28 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3387/FDIS 86B/3435/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all the parts in the IEC 61754 series, under the general title Fibre optic interconnecting
devices and passive components – Fibre optic connector interfaces, can be found on the IEC
website.
– 4 – 61754-28 IEC:2012
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61754-28 IEC:2012 – 5 –
INTRODUCTION
The International Electrotechnical Commission (IEC) draws attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning
IEC 61754-28.
IEC takes no position concerning the evidence, validity and scope of this patent right. The
holder of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.