EN 61291-4:2008

Optical amplifiers - Part 4: Multichannel applications - Performance specification template

IEC 61291-4:2008 applies to optical amplifier (OA) devices and sub-systems to be used in multichannel applications. The object of this performance specification template is to provide a frame for the preparation of detail specifications on the performances of OA devices and sub-systems to be used in multichannel applications. The main significant changes of this revision are the following: - the applicability has been extended to all commercially available optical amplifiers, not just optical fibre amplifiers; - Clause 7, EMC, has been added, and references to applicable test methods have been updated.

Lichtwellenleiter-Verstärker - Teil 4: Mehrkanalanwendungen - Vorlage für Leistungsspezifikationen

Amplificateurs optiques - Partie 4: Applications aux canaux multiples - Modèle de spécification de fonctionnement

la CEI 61291-4:2008 s'applique aux dispositifs d'amplification optique (AO) et aux sous-systèmes destinés à être utilisés dans les applications aux canaux multiples. L'objet de ce modèle de spécification de fonctionnement est de fournir un cadre pour la préparation des spécifications particulières relatives au fonctionnement des appareils AO et des sous-systèmes destinés à être utilisés dans les applications aux canaux multiples. Les principales modifications significatives sont les suivantes: - l'applicabilité a été étendue à tous les amplificateurs optiques disponibles sur le marché, pas simplement aux amplificateurs à fibres optiques; - l'Article 7, CEM, a été ajouté, et les références à des méthodes d'essai applicables ont été mises à jour.

Optični ojačevalniki - 4. del: Uporaba z več kanali - Šablona specifikacije izvedbe (IEC 61291-4:2008)

General Information

• Status: Withdrawn
• Publication Date: 29-Sep-2008
• Withdrawal Date: 31-Jul-2011
• ICS: 33.180.30 - Optic amplifiers
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Dec-2014
• Completion Date: 29-Dec-2014
• Ref Project: SIST EN 61291-4:2008 - Optical amplifiers - Part 4: Multichannel applications - Performance specification template (IEC 61291-4:2008)

Relations

• Replaces: EN 61291-4:2003 - Optical amplifiers - Part 4: Multichannel applications - Performance specification template
• Effective Date: 29-Jan-2023
• Replaced By: EN 61291-4:2012 - Optical amplifiers - Part 4: Multichannel applications - Performance specification template
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61291-4:2008
01-december-2008
1DGRPHãþD
SIST EN 61291-4:2004
2SWLþQLRMDþHYDOQLNLGHO8SRUDED]YHþNDQDOLâDEORQDVSHFLILNDFLMHL]YHGEH
,(&
Optical amplifiers - Part 4: Multichannel applications - Performance specification
template (IEC 61291-4:2008)
Lichtwellenleiter-Verstärker - Teil 4: Mehrkanalanwendungen - Vorlage für
Leistungsspezifikationen (IEC 61291-4:2008)
Amplificateurs optiques - Partie 4: Applications aux canaux multiples - Modèle de
spécification de fonctionnement (CEI 61291-4:2008)
Ta slovenski standard je istoveten z: EN 61291-4:2008
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
SIST EN 61291-4:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61291-4:2008

---------------------- Page: 2 ----------------------

SIST EN 61291-4:2008

EUROPEAN STANDARD
EN 61291-4

NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM

ICS 33.180.30 Supersedes EN 61291-4:2003


English version


Optical amplifiers -
Part 4: Multichannel applications -
Performance specification template
(IEC 61291-4:2008)


Amplificateurs optiques -  Lichtwellenleiter-Verstärker -
Partie 4: Applications Teil 4: Mehrkanalanwendungen -
aux canaux multiples - Vorlage für Leistungsspezifikationen
Modèle de spécification (IEC 61291-4:2008)
de fonctionnement
(CEI 61291-4:2008)




This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61291-4:2008 E

---------------------- Page: 3 ----------------------

SIST EN 61291-4:2008
EN 61291-4:2008 - 2 -
Foreword
The text of document 86C/774/CDV, future edition 2 of IEC 61291-4, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61291-4 on 2008-08-01.
This European Standard supersedes EN 61291-4:2003.
The main significant changes are the following:
– the applicability has been extended to all commercially available optical amplifiers, not just optical fibre
amplifiers;
– Clause 7, EMC, has been added;
– references to applicable test methods have been updated.
This standard is to be used in conjunction with EN 61291-1:2006.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61291-4:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61280 NOTE  Harmonized in EN 61280 series (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61291-4:2008
- 3 - EN 61291-4:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been m
...