prEN IEC 63041-3:2025
(Main)Piezoelectric sensors - Part 3: Physical sensors
Piezoelectric sensors - Part 3: Physical sensors
Piezoelektrische Sensoren - Teil 3: Physikalische Sensoren
Capteurs piézoélectriques - Partie 3: Capteurs physiques
Piezoelektrični senzorji - 3. del: Fizični senzorji
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2025
Piezoelektrični senzorji - 3. del: Fizični senzorji
Piezoelectric sensors - Part 3: Physical sensors
Piezoelektrische Sensoren - Teil 3: Physikalische Sensoren
Capteurs piézoélectriques - Partie 3: Capteurs physiques
Ta slovenski standard je istoveten z: prEN IEC 63041-3:2025
ICS:
31.140 Piezoelektrične naprave Piezoelectric devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
49/1495/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63041-3 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-04-18 2025-07-11
SUPERSEDES DOCUMENTS:
49/1474/CD, 49/1492/CC
IEC TC 49 : PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC DEVICES AND ASSOCIATED MATERIALS FOR FREQUENCY
CONTROL, SELECTION AND DETECTION
SECRETARIAT: SECRETARY:
Japan Mr Masanobu Okazaki
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
SC 47E
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights
of which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Piezoelectric sensors - Part 3: Physical sensors
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
IEC CDV 63041-3 ED2 © IEC 2025 – 2 – 49/1495/CDV
Link to Committee Draft for Vote (CDV) online document*:
https://osd.iec.ch/#/iec/archive/2549eb4e-695b-651d-e063-1410000a57aa/en/CCDV/1
How to access
This link leads you to the Online Standards Development (OSD) platform for National Mirror
Committee’s (NMC) comments. The project draft may be found further down this document.
Resource materials
We recommend NCs to review the available materials to better understand the member commenting
on the OSD platform. This includes the:
• OSD NC roles overview: here
• How to add and submit comments to the IEC: here
Contact
Should you require any assistance, please contact the IEC IT Helpdesk at helpdesk@iec.ch.
IEC CDV 63041-3 ED2 © IEC 2025 – 3 – 49/1495/CDV
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols and units . 8
3.1 Terms and definitions . 8
3.2 Symbols and units . 9
4 Specifications . 9
4.1 General . 9
4.2 Conceptual diagrams of sensor types . 9
4.2.1 General . 9
4.2.2 Conceptual diagram for sensor elements of SAW resonator type . 9
4.2.3 Conceptual diagram for sensor elements of SAW delay-line type . 10
4.3 Technical documents . 11
5 Delivery conditions . 11
6 Quality and reliability . 11
7 Test and measurement procedures . 11
Annex A (informative) Physical reaction in sensor cell and detection method . 13
A.1 Detection and measurement . 13
A.2 Typical formulae for detection methods of physical quantity . 13
A.2.1 General . 13
A.2.2 Non-acoustic type . 13
A.2.3 Acoustic type. 14
A.2.4 Delay-line type . 15
A.3 Calibration . 15
Bibliography . 16
Figure 1 – Conceptual diagram for SAW single resonator type . 10
Figure 2 – Conceptual diagram for SAW differential resonator type . 10
Figure 3 – Conceptual diagram for SAW transmission (two-port) delay-line type . 11
Figure 4 – Conceptual diagram for SAW reflective (one-port) delay-line type . 11
IEC CDV 63041-3 ED2 © IEC 2025 – 4 – 49/1495/CDV
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Piezoelectric sensors - Part 3: Physical sensors –
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for
standardization comprising all national electrotechnical committees (IEC National
Committees). The object of IEC is to promote international co-operation on all questions
concerning standardization in the electrical and electronic fields. To this end and in addition to
other activities, IEC publishes International Standards, Technical Specifications, Technical
Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National
Committee interested in the subject dealt with may participate in this preparatory work.
International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as
possible, an international consensus of opinion on the relevant subjects since each technical
committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted
by IEC National Committees in that sense. While all reasonable efforts are made to ensure that
the technical content of IEC Publications is accurate, IEC cannot be held responsible for the
way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply
IEC Publications transparently to the maximum extent possible in their national and regional
publications. Any divergence between any IEC Publication and the corresponding national or
regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies
provide conformity assessment services and, in some areas, access to IEC marks of
conformity. IEC is not responsible for any services carried out by independent certification
bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including
individual experts and members of its technical committees and IEC National Committees for
any personal injury, property damage or other damage of any nature whatsoever, whether
direct or indirect, or for costs (including legal fees) and expenses arising out of the publication,
use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the
referenced publications is indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve
the use of (a) patent(s). IEC takes no position concerning the evidence, validity or applicability
of any claimed patent rights in respect thereof. As of the date of publication of this document,
IEC [had/had not] received notice of (a) patent(s), which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest
information, which may be obtained from the patent database available at
https://patents.iec.ch. IEC shall not be held responsible for identifying any or all such patent
rights.
IEC CDV 63041-3 ED2 © IEC 2025 – 5 – 49/1495/CDV
International Standard IEC 63041‑3 has been prepared by by subcommittee 13: Sensor devices
and systems, IEC technical committee TC 49: Piezoelectric, dielectric and electrostatic devices
and associated materials for frequency control, selection and detection. It is an International
Standard.
This second edition cancels and replaces the first edition published in 2020. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) The term “SOURCE” of the definition has been added based on IEC TS 61994-5:2023.
The text of International Standard is based on the following documents:
Draft Report on voting
49/XX/FDIS 49/XX/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English [change
language if necessary].
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at http://www.iec.ch/members_experts/refdocs. The main document types developed by IEC
are described in greater detail at http://www.iec.ch/publications.
A list of all part in the IEC 63041 series, published under the general title Piezoelectric sensors,
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
– reconfirmed,
– withdrawn, or
– revised.
IEC CDV 63041-3 ED2 © IEC 2025 – 6 – 49/1495/CDV
INTRODUCTION
Further reading:
IEC 60068 (all parts), Environmental testing
IEC 60122-1, Quartz crystal units of assessed quality – Part 1: Generic specification
IEC 60122-2-1, Quartz crystal units for frequency control and selection – Part 2: Guide to the
use of quartz crystal units for frequency control and selection – Section one: Quartz crystal
units for microprocessor clock supply
IEC 60444-1, Measurement of quartz crystal unit parameters by zero phase technique in a pi -
network – Part 1: Basic method for the measurement of resonance frequency and resonance
resistance of quartz crystal units by zero phase technique in a pi-network
IEC 60444-5, Measurement of quartz crystal unit parameters – Part 5: Methods for the
determination of equivalent electrical parameters using automatic network analyzer techniques
and error correction
IEC 60444-9, Measurement of quartz crystal unit parameters – Part 9: Measurement of spurious
resonances of piezoelectric crystal units
IEC 60642, Piezoelectric ceramic resonators and resonator units for frequency control and
selection – Chapter I: Standard values and conditions – Chapter II: Measuring and test
conditions
IEC 60679 (all parts), Piezoelectric, dielectric and electrostatic oscillators of assessed quality
IEC 60758:2016, Synthetic quartz crystal – Specifications and guidelines for use
IEC 60862-1, Surface acoustic wave (SAW) filters of assessed quality – Part 1: Generic
specification
IEC 61019-1, Surface acoustic wave (SAW) resonators – Part 1: Generic specification
IEC 61240:2016, Piezoelectric devices – Preparation of outline drawings of surface-mounted
devices (SMD) for frequency control and selection – General rules
IEC 61760 (all parts), Surface mounting technology
IEC 61837 (all parts), Surface mounted piezoelectric devices for frequency control and
selection – Standard outlines and terminal lead connections
IEC TS 61994 (all parts), Piezoelectric, dielectric and electrostatic devices and associated
materials for frequency control, selection and detection – Glossary
IEC 62276:2016, Single crystal wafers for surface acoustic wave (SAW) device applications –
Spe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.