EN 61158-5-24:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 elements
Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 elements
IEC 61158-5-24:2014 defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-24: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 24-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-24: Définition des services de la couche application - Éléments de type 24
L'IEC 61158-5-24:2014 défini les services mis en place pour l'utilisateur de FAL, à la frontière entre l'utilisateur et la couche application du modèle de référence de bus de terrain; et la Gestion des systèmes, à la frontière entre la couche application et la Gestion des systèmes selon le modèle de référence de bus de terrain. La présente norme spécifie la structure et les services de la couche application de bus de terrain IEC, en conformité avec le modèle de référence de base de l'OSI (ISO/CEI 7498-1) et la structure de la couche application de l'OSI (ISO/CEI 9545).
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 5-24. del: Definicija opravil na aplikacijski ravni - Elementi tipa 24 (IEC 61158-5-24:2014)
Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«.
Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 12. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa na zunaj vidno opravilo, ki ga zagotavljajo različne vrste aplikacijske ravni procesnih vodil v smislu a) abstraktnega modela za določanje aplikacijskih virov (objektov), ki ga lahko upravljajo uporabniki prek opravila FAL,
b) primitivnih dejanj in dogodkov opravila;
c) parametrov, povezanih z vsakim primitivnim dejanjem in dogodkom, ter obliko, ki jo prevzamejo; in
d) medsebojne povezave med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji.
Namen tega standarda je določiti opravila, ki se zagotavljajo za
a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in referenčnim modelom aplikacijskega nivoja procesnega vodila, in
b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanjem sistemov
za referenčni model procesnega vodila.
Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil. Čeprav ta opravila določajo način izdajanja in dostavljanja zahtev in odzivov z vidika aplikacij, ne zajemajo specifikacije v zvezi s tem, kako naj se nanje odzovejo aplikacije, ki te zahteve in odzive oddajajo. To pomeni, da vedenjski vidiki aplikacij niso opredeljeni; opredeljena je le definicija zahtev in odzivov, ki jih lahko pošiljajo/prejemajo. Tako se uporabnikom aplikacijskega nivoja procesnih vodil omogoči večja prilagodljivost pri standardizaciji takega vedenja objektov. Poleg teh opravil so v tem standardu opredeljena tudi nekatera podporna opravila, da se omogoči dostop do aplikacijskega nivoja procesnih vodil za nadzorovanje nekaterih vidikov njegovega delovanja.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 5-24. del: Definicija opravil na aplikacijski ravni - Elementi tipa 24 (IEC 61158-5-24:2014)Industrielle Kommunikationsnetze - Feldbusse - Teil 5-24: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 24-Elemente (IEC 61158-5-24:2014)Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-24: Définition des services de la couche application - Éléments de type 24 (CEI 61158-5-24:2014)Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 elements (IEC 61158-5-24:2014)35.110OmreževanjeNetworking35.100.70Uporabniški slojApplication layer25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 61158-5-24:2014SIST EN 61158-5-24:2015en,fr,de01-marec-2015SIST EN 61158-5-24:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61158-5-24
October 2014 ICS 25.040.40; 35.100.70; 35.110
English Version
Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 elements (IEC 61158-5-24:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-24: Définition des services de la couche application - Éléments de type 24 (CEI 61158-5-24:2014)
Industrielle Kommunikationsnetze - Feldbusse -
Teil 5-24: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 24-Elemente (IEC 61158-5-24:2014) This European Standard was approved by CENELEC on 2014-09-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-5-24:2014 E SIST EN 61158-5-24:2015
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-22 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-09-22
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association.
Endorsement notice The text of the International Standard IEC 61158-5-24:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61784-1 NOTE Harmonized as EN 61784-1. IEC 61784-2 NOTE Harmonized as EN 61784-2. SIST EN 61158-5-24:2015
- 3 - EN 61158-5-24:2014 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu
Publication Year Title EN/HD Year
IEC 61158-1 2014
Industrial communication networks - Fieldbus specifications -
Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series EN 61158-1 2014 IEC 61158-6-24 2014
Industrial communication networks - Fieldbus specifications -
Part 6-24: Application layer protocol specification - Type-24 Elements EN 61158-6-24 1) -
ISO/IEC 7498-1 -
Information technology - Open Systems Interconnection - Basic reference model: The basic model - -
ISO/IEC 8824-1 -
Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation - -
ISO/IEC 9545 -
Information technology - Open Systems Interconnection - Application layer structure - -
ISO/IEC 10731 -
Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services - -
1) To be published. SIST EN 61158-5-24:2015
IEC 61158-5-24 Edition 1.0 2014-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial communication networks – Fieldbus specifications –
Part 5-24: Application layer service definition – Type-24 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 5-24: Définition des services de la couche application – Éléments
de type 24
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XD ICS 25.040.40; 35.100.70; 35.110 PRICE CODE CODE PRIX ISBN 978-2-8322-1744-3
– 2 – IEC 61158-5-24:2014 © IEC 2014 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope . 8
General . 8 1.1 Specifications . 9 1.2 Conformance . 9 1.32 Normative references . 9 3 Terms, definitions, symbols, abbreviations, and conventions . 10
Referenced terms and definitions . 10 3.1 Additional terms and definitions . 10 3.2 Abbreviations and symbols . 15 3.3 Conventions . 17 3.44 Concepts . 19 5 Data type ASE . 20 6 Communication model specifications . 20
Type specific concepts . 20 6.1 Overview . 20 6.2 FSM ASE . 23 6.3 FAL ASEs. 29 6.4 FAL ARs . 70 6.5Bibliography . 95
Figure 1 – FAL ASE model of Type 24 . 22 Figure 2 – AR model for field device control service . 72 Figure 3 – AR model for message service . 72 Figure 4 – MSG ARs between each APs . 73
Table 1 – AP type definition . 21 Table 2 – Support list of service for each class of FSM ASE . 24 Table 3 – FSM-Reset . 25 Table 4 – FSM-GetStatus . 26 Table 5 – FSM-SetContext . 27 Table 6 – FSM-GetContext . 28 Table 7 – FSM-Start . 28 Table 8 – Support list of service for each class of FDC ASE . 29 Table 9 – FDC-Reset for master class . 33 Table 10 – FDC-Open for master class . 33 Table 11 – FDC-Enable for master class . 34 Table 12 – FDC-Connect for master class . 34 Table 13 – FDC-SyncSet for master class . 35 Table 14 – FDC-Disconnect for master class . 36 Table 15 – FDC-ResumeCycle for master class . 37 Table 16 – FDC-ComCycle for master class . 37 SIST EN 61158-5-24:2015
IEC 61158-5-24:2014 © IEC 2014 – 3 – Table 17 – FDC-Command for master class . 38 Table 18 – FDC-DataExchange for master class . 39 Table 19 – FDC-Reset for slave class . 42 Table 20 – FDC-Open for slave class . 43 Table 21 – FDC-Enable for slave class . 43 Table 22 – FDC-Connect for slave class . 44 Table 23 – FDC-SyncSet for slave class . 45 Table 24 – FDC-Disconnect for slave class . 46 Table 25 – FDC-ResumeCycle for slave class . 47 Table 26 – FDC-ComCycle for slave class . 47 Table 27 – FDC-Command for slave class . 48 Table 28 – FDC-Command for slave class . 49 Table 29 – FDC-Reset for monitor class . 51 Table 30 – FDC-Open for monitor class . 51 Table 31 – FDC-Enable for monitor class . 52 Table 32 – FDC-GetCMD for monitor class . 52 Table 33 – FDC-GetRSP for monitor class . 53 Table 34 – Support list of service for each class of Message ASE . 54 Table 35 – MSG-Reset for requester class . 56 Table 36 – MSG-Open for requester class . 57 Table 37 – MSG-Enable for requester class . 57 Table 38 – MSG-UserMessage for requester class . 58 Table 39 – MSG-OnewayMessage
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.