Common control interface for networked digital audio and video products - Part 3: Video

IEC 62379-3:2015(E) details aspects of the common control interface specified in IEC 62379-1 that are specific to video.

Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte - Teil 3: Video

Interface de commande commune destiné aux produits audio et vidéo numériques connectés en réseau - Partie 3: Vidéo

L'IEC 62379-3:2015 décrit les aspects de l'interface de commande commune spécifiée dans l'IEC 62379-1 qui s'appliquent à la vidéo.

Skupni krmilni vmesnik za digitalne avdio in video izdelke, vključene v omrežje - 3. del: Video (TA 4) (IEC 62379-3:2015)

Ta del standarda IEC 62379 podrobno opisuje vidike skupnega krmilnega vmesnika, opredeljene v standardu IEC 62379-1, ki se nanašajo na video.

General Information

Status
Published
Publication Date
10-Sep-2015
Withdrawal Date
09-Jul-2018
Current Stage
6060 - Document made available - Publishing
Start Date
11-Sep-2015
Completion Date
11-Sep-2015

Buy Standard

Standard
EN 62379-3:2015
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2015
6NXSQLNUPLOQLYPHVQLN]DGLJLWDOQHDYGLRLQYLGHRL]GHONHYNOMXþHQHYRPUHåMH
GHO9LGHR 7$  ,(&
Common control interface for networked digital audio and video products -- Part 3: Video
(TA 4) (IEC 62379-3:2015)
Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte
- Teil 3: Video (IEC 62379-3:2015)
Interface de commande commune destiné aux produits audio et vidéo numériques
connectés en réseau - Partie 3: Vidéo (IEC 62379-3:2015)
Ta slovenski standard je istoveten z: EN 62379-3:2015
ICS:
33.160.40 Video sistemi Video systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62379-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2015
ICS 33.160; 35.100
English Version
Common control interface for networked digital audio and video
products - Part 3: Video
(IEC 62379-3:2015)
Interface de commande commune destiné aux produits Gemeinsame Steuerschnittstelle für netzwerkbetriebene
audio et vidéo numériques connectés en réseau - digitale Audio- und Videogeräte - Teil 3: Video
Partie 3: Vidéo (IEC 62379-3:2015)
(IEC 62379-3:2015)
This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62379-3:2015 E
European foreword
The text of document 100/2465/FDIS, future edition 1 of IEC 62379-3, prepared by Technical
Area 4 "Digital system interfaces and protocols" of IEC/TC 100 "Audio, video and multimedia systems
and equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-04-10
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-07-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62379-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 62379-2:2008 NOTE Harmonized as EN 62379-2:2009 (not modified).
IEC 62379-5 Series NOTE Harmonized as EN 62379-5 Series.
IEC 62379-7 NOTE Harmonized as EN 62379-7.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 62379-1 2007 Common control interface for networked EN 62379-1 2007
digital audio and video products -
Part 1: General
IEC 62379-3 ®
Edition 1.0 2015-06
INTERNATIONAL
STANDARD
Common control interface for networked digital audio and video products –

Part 3: Video
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160; 35.100 ISBN 978-2-8322-2687-2

– 2 – IEC 62379-3:2015 © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 7
4 Video format definitions . 7
4.1 Video signal format definitions . 7
4.1.1 General . 7
4.1.2 Video parameters . 7
4.1.3 Video signal formats . 9
4.2 Video transport format definitions . 10
4.2.1 General . 10
4.2.2 Video transport root location. 10
4.3 Video metadata format definitions . 10
4.3.1 General . 10
4.3.2 Video metadata root location . 10
5 MIB definitions for video blocks . 11
5.1 General . 11
5.2 Type definitions . 11
5.2.1 General . 11
5.2.2 Textual conventions . 11
5.2.3 Sequences . 11
5.3 Video port and associated managed object type definitions . 12
5.3.1 Generic port functionality . 12
5.3.2 Video locked to reference . 13
5.4 Other video block and associated managed object type definitions . 14
5.4.1 Video mixer blocks . 14
5.4.2 Video crosspoint blocks . 16
5.4.3 Video converter blocks . 18
5.4.4 Video level alarm blocks . 19
Annex A (informative) Machine-readable video format definitions . 22
Annex B (informative) Machine-readable video block definitions . 48
Annex C (informative) Tree of example video formats . 61
Annex D (informative) Worked examples . 64
Bibliography . 65

Figure 1 – Video port blocks . 12
Figure 2 – Video mixer block . 14
Figure 3 – Video crosspoint block . 16
Figure 4 – Video converter block . 18
Figure 5 – Video level alarm block . 19

IEC 62379-3:2015 © IEC 2015 – 3 –

Table 1 – Managed objects for video ports . 13
Table 2 – Managed objects for video locked . 13
Table 3 – Managed objects for video mixer blocks . 14
Table 4 – Managed objects for video crosspoint blocks . 17
Table 5 – Managed objects for video converter blocks . 18
Table 6 – Managed objects for video level alarm blocks . 20

– 4 – IEC 62379-3:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COMMON CONTROL INTERFACE FOR NETWORKED
DIGITAL AUDIO AND VIDEO PRODUCTS –

Part 3: Video
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.