SIST EN 62379-3:2015

Common control interface for networked digital audio and video products -- Part 3: Video (TA 4) (IEC 62379-3:2015)

This part of IEC 62379 details aspects of the common control interface specified in
IEC 62379-1 that are specific to video.

Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte - Teil 3: Video (IEC 62379-3:2015)

Interface de commande commune destiné aux produits audio et vidéo numériques connectés en réseau - Partie 3: Vidéo (IEC 62379-3:2015)

L'IEC 62379-3:2015 décrit les aspects de l'interface de commande commune spécifiée dans l'IEC 62379-1 qui s'appliquent à la vidéo.

Skupni krmilni vmesnik za digitalne avdio in video izdelke, vključene v omrežje - 3. del: Video (TA 4) (IEC 62379-3:2015)

Ta del standarda IEC 62379 podrobno opisuje vidike skupnega krmilnega vmesnika, opredeljene v standardu IEC 62379-1, ki se nanašajo na video.

General Information

• Status: Published
• Publication Date: 22-Oct-2015
• ICS: 33.160.40 - Video systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: AVM - Audio, video and multimedia systems and equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Sep-2015
• Due Date: 22-Nov-2015
• Completion Date: 23-Oct-2015
• Ref Project: EN 62379-3:2015 - Common control interface for networked digital audio and video products - Part 3: Video

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62379-3:2015
01-december-2015
6NXSQLNUPLOQLYPHVQLN]DGLJLWDOQHDYGLRLQYLGHRL]GHONHYNOMXþHQHYRPUHåMH
GHO9LGHR7$,(&
Common control interface for networked digital audio and video products -- Part 3: Video
(TA 4) (IEC 62379-3:2015)
Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte
- Teil 3: Video (IEC 62379-3:2015)
Interface de commande commune destiné aux produits audio et vidéo numériques
connectés en réseau - Partie 3: Vidéo (IEC 62379-3:2015)
Ta slovenski standard je istoveten z: EN 62379-3:2015
ICS:
33.160.40 Video sistemi Video systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62379-3:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62379-3:2015

---------------------- Page: 2 ----------------------

SIST EN 62379-3:2015


EUROPEAN STANDARD EN 62379-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2015
ICS 33.160; 35.100

English Version
Common control interface for networked digital audio and video
products - Part 3: Video
(IEC 62379-3:2015)
Interface de commande commune destiné aux produits Gemeinsame Steuerschnittstelle für netzwerkbetriebene
audio et vidéo numériques connectés en réseau - digitale Audio- und Videogeräte - Teil 3: Video
Partie 3: Vidéo (IEC 62379-3:2015)
(IEC 62379-3:2015)
This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62379-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62379-3:2015
EN 62379-3:2015
European foreword
The text of document 100/2465/FDIS, future edition 1 of IEC 62379-3, prepared by Technical
Area 4 "Digital system interfaces and protocols" of IEC/TC 100 "Audio, video and multimedia systems
and equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62379-3:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-04-10
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-07-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62379-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 62379-2:2008 NOTE Harmonized as EN 62379-2:2009 (not modified).
IEC 62379-5 Series NOTE Harmonized as EN 62379-5 Series.
IEC 62379-7 NOTE Harmonized as EN 62379-7.
2

---------------------- Page: 4 ----------------------

SIST EN 62379-3:2015
EN 62379-3:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 62379-1 2007 Common control interface for networked EN 62379-1 2007
digital audio and video products -
Part 1: General

3

---------------------- Page: 5 ----------------------

SIST EN 62379-3:2015

---------------------- Page: 6 ----------------------

SIST EN 62379-3:2015



IEC 62379-3

®


Edition 1.0 2015-06




INTERNATIONAL



STANDARD




















Common control interface for networked digital audio and video products –

Part 3: Video



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.160; 35.100 ISBN 978-2-8322-2687-2



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62379-3:2015
– 2 – IEC 62379-3:2015 © IEC 2015
CONTENTS

FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 7
4 Video format definitions . 7
4.1 Video signal format definitions . 7
4.1.1 General . 7
4.1.2 Video parameters . 7
4.1.3 Video signal formats . 9
4.2 Video transport format definitions . 10
4.2.1 General . 10
4.2.2 Video transport root location. 10
4.3 Video metadata format definitions . 10
4.3.1 General . 10
4.3.2 Video metadata root location . 10
5 MIB definitions for video blocks . 11
5.1 General . 11
5.2 Type definitions . 11
5.2.1 General . 11
5.2.2 Textual conventions . 11
5.2.3 Sequences . 11
5.3 Video port and associated managed object type definitions . 12
5.3.1 Generic port functionality . 12
5.3.2 Video locked to reference . 13
5.4 Other video block and associated managed object type definitions . 14
5.4.1 Video mixer blocks . 14
5.4.2 Video crosspoint blocks . 16
5.4.3 Video converter blocks . 18
5.4.4 Video level alarm blocks . 19
Annex A (informative) Machine-readable video format definitions . 22
Annex B (informative) Machine-readable video block definitions . 48
Annex C (informative) Tree of example video formats . 61
Annex D (informative) Worked examples . 64
Bibliography . 65

Figure 1 – Video port blocks . 12
Figure 2 – Video mixer block . 14
Figure 3 – Video crosspoint block . 16
Figure 4 – Video converter block . 18
Figure 5 – Video level alarm block . 19

---------------------- Page: 8 ----------------------

SIST EN 62379-3:2015
IEC 62379-3:2015 © IEC 2015 – 3 –

Table 1 – Managed objects for video ports . 13
Table 2 – Managed objects for video locked . 13
Table 3 – Managed objects for video mixer blocks . 14
Table 4 – Managed objects for video crosspoint blocks . 17
Table 5 – Managed objects for video converter blocks . 18
Table 6 – Managed objects for video level alarm blocks . 20

---------------------- Page: 9 ----------------------

SIST EN 62379-3:2015
– 4 – IEC 62379-3:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

COMMON CONTROL INTERFACE FOR NETWORKED
DIGITAL AUDIO AND VIDEO PRODUCTS –

Part 3: Video

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62379-3 has been prepared by technical area 4: Digital system
interfaces and protocols of IEC technical committee 100: Audio, video and multimedia
systems and equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
100/2465/FDIS 100/2495/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62379 series, published under the general title Common control
interface for networked digital audio and video products, can be found on the IEC website.

---------------------- Page: 10 ----------------------

SIST EN 62379-3:2015
IEC 62379-3:2015 © IEC 2015 – 5 –
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

A bilingual version of this publication may be issued at a later date.

---------------------- Page: 11 ----------------------

SIST EN 62379-3:2015
– 6 – IEC 62379-3:2015 © IEC 2015
INTRODUCTION
The IEC 62379 series specifies the common control interface, a protocol for managing
equipment which conveys audio and/or video across digital networks.
The following parts exist or are planned:
1) General
2) Audio
3) Video
4) Data
5) Transmission over networks
6) Packet transfer service
7) Measurement for EBU ECN-IPM
IEC 62379-1:2007, specifies aspects which are common to all equipment, and it includes an
introduction to the common control interface.
IEC 62379-2:2008, IEC 62379-3 (this standard) and IEC 62379-4 (under consideration)
specify control of internal functions specific to equipment carrying particular types of live
media. IEC 62379-4 refers to time-critical data such as commands to automation equipment,
but not to packet data such as the control messages themselves.
IEC 62379-5 specifies control of transmission of these media over each individual network
technology. It includes network specific management interfaces along with network specific
control elements that integrate into the control framework.
IEC 62379-5-1 specifies management of aspects which are common to all network
technologies.
IEC 62379-5-2 specifies protocols which can be used between networking equipment to
enable the setting up of calls which are routed across different networking technologies.
IEC 62379-5-3, onwards, specify management of aspects which are particular to individual
networking technologies.
IEC 62379-6, specifies carriage of control and status messages and non-audiovisual data
over transports that do not support audio and video, such as RS232 serial links, with (as for
IEC 62379-5) a separate subpart for each technology.
IEC 62379-7 specifies aspects that are specific to the measurement of the service
experienced by audio and video streams and in particular to the requirements of EBU ECN-
IPM Measurements Group.

---------------------- Page: 12 ----------------------

SIST EN 62379-3:2015
IEC 62379-3:2015 © IEC 2015 – 7 –
COMMON CONTROL INTERFACE FOR NETWORKED
DIGITAL AUDIO AND VIDEO PRODUCTS –

Part 3: Video



1 Scope
This part of IEC 62379 details aspects of the common control interface specified in
IEC 62379-1 that are specific to video.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 62379-1:2007, Common control interface for networked audio and video products –
Part 1: General
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62379-1 apply.
3.2 Abbreviations
EBU ECN-IPM European Broadcasting Union Expert Community Network and
Infrastructure Internet Protocol Measurement
HD High Definition
OID Object Identifier
PSF Progressive Segmented Frame
SD Standard Definition
UHD Ultra High Definition
4 Video format definitions
4.1 Video signal format definitions
4.1.1 General
At any point in the video signal chain, the video data will be in a particular format. For
management purposes, the format shall be identified by an object identifier, either a “Common
control interface standard” object identifier as defined in this standard or an object identifier
defined elsewhere.
NOTE Permitting video format identifiers to be defined outside this standard allows use of proprietary formats
within the standard protocol and also allows industry standard formats to emerge that may eventually be
incorporated into future revisions of this standard.
4.1.2 Video parameters
4.1.2.1 General
The definitions in 4.1.3 make reference to "parameters" which provide additional information
about the format. These parameters shall be mapped to "sub-identifier" values as specified in
the other subclauses of 4.1.2. Any parameter may be "unspecified".
The "sub-identifier" values shall be appended to the object identifiers as additional arcs, in the
order in which the parameters are listed in the relevant subclause of 4.1.3; except that if a

---------------------- Page: 13 ----------------------

SIST EN 62379-3:2015
– 8 – IEC 62379-3:2015 © IEC 2015
parameter is unspecified, and either is the last parameter or all subsequent parameters are
also unspecified, then it shall be omitted.
For all parameters, "unspecified" is coded as zero, so this rule ensures that the OID does not
end with a zero arc.
EXAMPLE If the last two parameters are vertical resolution and scan type, then 1080P would be coded as .1080.1,
1080P (with scan type unspecified) as .1080, and P (with vertical resolution unspecified) as .0.1.
4.1.2.2 Frame rate
The sub-identifier for frame rate shall be a value of the following type:
FrameRate::= Unsigned32 (0. 2147483647)
-- An integer representing the calculated frame rate ratio of the encoded
-- video signal.
-- A value of zero shall indicate unspecified.

-- This is computed by calculating the frame rate ratio,
-- such as 24000/1001 = 23.976Hz and multiplying by 1000
-- to convert the value to an integer; in this case 23976.

-- For display purposes the value needs to be divided by
-- 1000 and a decimal point inserted as shown in the
-- Display-Hint.

4.1.2.3 Source type
The sub-identifier for the source type of the video shall be a value of the following type:
SourceType::= INTEGER {
 unspecified (0),
 sd      (1),
 hd      (2),
 uhd4k    (3),
 uhd8k    (4)
} (unspecified. uhd8k)

-- An integer representing the source type of the encoded video signal.
-- A value of zero shall indicate unspecified.

4.1.2.4 Vertical resolution
The sub-identifier for the vertical resolution shall be a value of the following type:
LineResolution::= INTEGER
-- An integer representing the vertical
-- resolution of the encoded video signal.
-- A value of zero shall indicate unspecified.

4.1.2.5 Scan type
The sub-identifier for the video scan type shall be a value of the following type:
ScanType::= INTEGER {
 unspecified (0),
 progressive (1),
 interlaced  (2),
 psf     (3)
} (unspecified.psf)

-- An integer representing the scan type of the encoded video signal.
-- A value of zero shall indicate unspecified.

4.1.2.6 Coding type
The sub-identifier for the video coding type shall be a value of the following type:
CodingType::= INTEGER {

---------------------- Page: 14 ----------------------

SIST EN 62379-3:2015
IEC 62379-3:2015 © IEC 2015 – 9 –
 unspecified  (0),
 uncompressed (1),
 mpeg2     (2),
 h264     (3),
 jpeg2000   (4),
 smptevc2   (5),
 vp8      (6),
 h264ScaleExtn (7),
 h265HEVC   (8)
} (unspecified. h265HEVC)

-- An integer representing the coding type of the encoded video signal.
-- A value of zero shall indicate unspecified.

4.1.2.7 Source aspect ratio
The sub-identifier for the source aspect ratio shall be a value of the following type:
SourceAspectRatio::= INTEGER {
 Unspecified  (0),
 fourByThree  (43),
 sixteenByNine (169),
 twoPointTwoOne (221)
} (unspecified.twoPointTwoOne)

-- An integer representing the source aspect ratio of the encoded
-- video signal.
-- A value of zero shall indicate unspecified.

4.1.2.8 Active format description codes
The sub-identifier for the active format description codes shall be a value of the following type:
ActiveFormatDescriptionCodes::= INTEGER
-- An integer representing the active format description codes for
-- video used with the range of source aspect ratios.
-- The codes are from 0000-1111
-- See SMPTE ST 2016-1:2009 for code descriptions.

4.1.3 Video signal formats
4.1.3.1 Video signal format root location
Video signal formats shall be rooted at the following location in the MIB tree:
iec62379       OBJECT IDENTIFIER::= { iso(1) standard(0) 62379 }

videoFormat     OBJECT IDENTIFIER::= { iec62379 video(3) format(2) }

videoSignalFormat OBJECT IDENTIFIER::= { videoFormat Signal(1) }

The following definitions shall be used to identify the specified formats.
NOTE Annex C contains an example of set of formats defined by this standard.
4.1.3.2 Unspecified video
unspecifiedVideo   OBJECT IDENTIFIER::=
                   { videoSignalFormat unspecified(0) }
-- wildcard – any supported format allowed

4.1.3.3 No video
noVideo       OBJECT IDENTIFIER::= { videoSignalFormat none(1) }
-- indicates the output is non-existent

4.1.3.4 Invalid video
invalidVideo    OBJECT IDENTIFIER::= { videoSignalFormat invalid(2) }

---------------------- Page: 15 ----------------------

SIST EN 62379-3:2015
– 10 – IEC 62379-3:2015 © IEC 2015
-- indicates an error, such as inability to decode a signal earlier in
-- the chain

4.1.3.5 Video source
videoSource     OBJECT IDENTIFIER::= { videoSignalFormat source(3) }
-- video source

The video source identifier shall have four parameters. The first shall be the frame rate, the
second shall be the video source type, the third shall be the vertical resolution and the fourth
shall be the scan type.
4.1.3.6 Video coding type
videoCodingType   OBJECT IDENTIFIER::= { videoSignalFormat coding(4) }
-- video coding type

The video coding type identifier shall have one parameter. This shall be either the coding type
or uncompressed, if not coded.
4.1.3.7 Aspect ratio
aspectRatio   OBJECT IDENTIFIER::=
                   { videoSignalFormat aspectRatio (5) }
-- aspect ratio of the video

The video aspect ratio identifier shall have two parameters. The first shall be the source
aspect ratio, the second shall be the active format description code for the source aspect ratio.
4.2 Video transport format definitions
4.2.1 General
For management purposes, the transport format shall be identified by an object identifier,
either a “Common control interface standard” object identifier as defined in this standard or an
object identifier defined elsewhere.
NOTE Permitting video transport format identifiers to be defined outside this standard allows use of proprietary
formats within the standard protocol and also allows industry standard formats to emerge that may eventually be
incorporated into future revisions of this standard.
4.2.2 Video transport root location
Video transport formats shall be rooted at the following location in the MIB tree:
videoTransportFormat OBJECT IDENTIFIER::= { videoFormat transport(2) }
The following definitions shall be used to identify the specified transport formats.
unspecifiedTransport OBJECT IDENTIFIER::=
        { videoTransportFormat unspecified(0) }

analogue  OBJECT IDENTIFIER::= { videoTransportFormat analogue(1) }

4.3 Video metadata format definitions
4.3.1 General
For management purposes, the metadata format shall be identified by an object identifier,
either a “Common control interface standard” object identifier as defined in this standard or an
object identifier defined elsewhere.
NOTE Permitting video metadata format identifiers to be defined outside this standard allows use of proprietary
formats within the standard protocol and also allows industry standard formats to emerge that may eventually be
incorporated into future revisions of this standard.
4.3.2 Video metadata root location
Video metadata formats shall be rooted at the following location in the MIB tree:
videoMetadataFormat OBJECT IDENTIFIER::= { videoFormat metadata(3) }

---------------------- Page: 16 ----------------------

SIST EN 62379-3:2015
IEC 62379-3:2015 © IEC 2015 – 11 –
The following definitions shall be used to identify the specified metadata formats.
unspecifiedMetadata OBJECT IDENTIFIER::=
                   { videoMetadataFormat unspecified(0) }

5 MIB definitions for video blocks
5.1 General
This clause defines a set of managed object types for representing control functions in
network controlled video equipment. The format of the definitions is as specified in
IEC 62379-1.
For management purposes, a piece of video equipment shall be modelled as a number of
discrete video blocks and video connectors, as specified in IEC 62379-1. Each video block
may have zero or more inputs and zero or more outputs, and each input or output may carry
one or more channels. Each video connector shall connect one video block output to one
video block input with a one-to-one mapping of channels between the blocks.
NOTE 1 A piece of equipment may be fixed-function, in which case the number of video blocks present and the
connections between them will be immutable, or it may be programmable, in which case the number of video blocks
present and/or the connections bet
...