EN IEC 61753-071-02:2020
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
IEC 61753-071-02:2020 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches need to satisfy in order to be categorized as meeting the requirements of category C – controlled environments, as defined in Annex A of IEC 61753-1:2018. This first edition cancels and replaces IEC 61753-071-2 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-071-2:2014. a) addition of performance requirements of repeatability and switching durability; b) deleting of performance requirements of directivity; c) deleting of test of operational shock; d) change of performance requirements of switching time; e) change of test condition of high optical power; f) harmonization of the test conditions with IEC 61753-1:2018.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-02: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter für die Kategorie C - Kontrollierte Umgebung
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non connectorisés pour la catégorie C - Environnements contrôlés
IEC 61753-071-02:2020 contient les sévérités et les exigences initiales minimales d'essai et de mesure que les commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés doivent satisfaire afin d'être classés comme conformes aux exigences de la catégorie C – environnements contrôlés, comme cela est défini à l’Annexe A de l'IEC 61753‑1:2018. Cette première édition annule et remplace l'IEC/PAS 61753-071-2 parue en 2014 dont elle constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'IEC 61753-071-2:2014: a) ajout d'exigences de performance sur la répétabilité et la durabilité des commutations; b) suppression des exigences de performance sur la directivité; c) suppression de l'essai de choc en fonctionnement; d) modification des exigences de performance sur le temps de commutation; e) modification des conditions d'essai de puissance optique élevée; f) harmonisation des conditions d'essai avec celles de l'IEC 61753-1:2018.
Optični spojni elementi in pasivne komponente - Tehnični standard - 071-02. del: Prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-071-02:2020)
Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih morajo izpolnjevati prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna, da ustrezajo zahtevam kategorije C – nadzorovana okolja, kot je opredeljeno v dodatku A standarda IEC 61753-1:2018.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2021
Nadomešča:
SIST EN 61753-071-2:2014
Optični spojni elementi in pasivne komponente - Tehnični standard - 071-02. del:
Prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna
za kategorijo C - Nadzorovana okolja (IEC 61753-071-02:2020)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches
for category C - Controlled environments (IEC 61753-071-02:2020)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter
für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-02:2020)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non
connectorisés pour la catégorie C - Environnements contrôlés (IEC 61753-071-02:2020)
Ta slovenski standard je istoveten z: EN IEC 61753-071-02:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61753-071-02
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2020
ICS 33.180.20 Supersedes EN 61753-071-2:2014 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 071-02: Non-connectorized single-
mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C -
Controlled environments
(IEC 61753-071-02:2020)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 071-02: Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit
Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 Steckverbindern versehene räumliche 1 x 2 und 2 x 2
non connectorisés pour la catégorie C - Environnements Einmodenschalter für die Kategorie C - Kontrollierte
contrôlés Umgebung
(IEC 61753-071-02:2020) (IEC 61753-071-02:2020)
This European Standard was approved by CENELEC on 2020-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-071-02:2020 E
European foreword
The text of document 86B/4324/FDIS, future edition 1 of IEC 61753-071-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-071-
02:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-27
document have to be withdrawn
This document supersedes EN 61753-071-2:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61753-071-02:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300-3-3 NOTE Harmonized as EN 61300-3-3
IEC 61300-3-4 NOTE Harmonized as EN 61300-3-4
IEC 61753-071-2:2014 NOTE Harmonized as EN 61753-071-2:2014 (not modified)
IEC 61753-1:2018 NOTE Harmonized as EN IEC 61753-1:2018 (not modified)
IEC 62343-1 NOTE Harmonized as EN IEC 62343-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 60876-1 - Fibre optic interconnecting devices and EN 60876-1 -
passive components - Fibre optic spatial
switches - Part 1: Generic specification
IEC 61300 series Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
Publication Year Title EN/HD Year
IEC 61300-2-9 - EN 61300-2-9 -
Fibre optic interconnecting devices and
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -- Part 3-2:
Examinations and measurements -
Polarization dependence of a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
Publication Year Title EN/HD Year
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-21 - Fibre optic interconnecting devices and EN IEC 61300-3-21 -
passive components - Basic test and
measurement procedures - Part 3-21:
Examinations and measurements -
Switching time
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3-28:
Examinations and measurements -
Transient loss
IEC 61300-3-50 - Fibre optic interconnecting devices and EN 61300-3-50 -
passive components - Basic test and
measurement procedures - Part 3-50:
Examinations and measurements -
Crosstalk for optical spatial switches
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
IEC 61753-071-02 ®
Edition 1.0 2020-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components –
Performance standard –
Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial
switches for category C – Controlled environments
Dispositifs d’interconnexion et composants passifs fibroniques –
Norme de performance –
Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2
non connectorisés pour la catégorie C – Environnements contrôlés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-8853-5
– 2 – IEC 61753-071-02:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test conditions . 8
5 Test report . 8
6 Performance requirements. 9
6.1 Dimensions . 9
6.2 Sample size . 9
6.3 Test details and requirements . 9
Annex A (normative) Sample size . 13
Bibliography . 14
Figure 1 – Configuration of 1 × 2 spatial switch . 7
Figure 2 – Configuration of 2 × 2 spatial switch, non-crossover type . 7
Figure 3 – Configuration of 2 × 2 spatial switch, crossover type . 8
Table 1 – Single-mode spectral bands . 8
Table 2 – Test details and requirements for category C . 9
Table A.1 – Number of samples for each test . 13
IEC 61753-071-02:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 071-02: Non-connectoriz
...
SLOVENSKI STANDARD
SIST EN IEC 61753-071-2:2021
01-januar-2021
Nadomešča:
SIST EN 61753-071-2:2014
Optični spojni elementi in pasivne komponente - Tehnični standard - 071-2. del:
Prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna
za kategorijo C - Nadzorovana okolja (IEC 61753-071-02:2020)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches
for category C - Controlled environments (IEC 61753-071-02:2020)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter
für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-02:2020)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non
connectorisés pour la catégorie C - Environnements contrôlés (IEC 61753-071-02:2020)
Ta slovenski standard je istoveten z: EN IEC 61753-071-02:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-071-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN IEC 61753-071-2:2021
SIST EN IEC 61753-071-2:2021
EUROPEAN STANDARD EN IEC 61753-071-02
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2020
ICS 33.180.20 Supersedes EN 61753-071-2:2014 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 071-02: Non-connectorized single-
mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C -
Controlled environments
(IEC 61753-071-02:2020)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 071-02: Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit
Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 Steckverbindern versehene räumliche 1 x 2 und 2 x 2
non connectorisés pour la catégorie C - Environnements Einmodenschalter für die Kategorie C - Kontrollierte
contrôlés Umgebung
(IEC 61753-071-02:2020) (IEC 61753-071-02:2020)
This European Standard was approved by CENELEC on 2020-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-071-02:2020 E
SIST EN IEC 61753-071-2:2021
European foreword
The text of document 86B/4324/FDIS, future edition 1 of IEC 61753-071-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-071-
02:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-27
document have to be withdrawn
This document supersedes EN 61753-071-2:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61753-071-02:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300-3-3 NOTE Harmonized as EN 61300-3-3
IEC 61300-3-4 NOTE Harmonized as EN 61300-3-4
IEC 61753-071-2:2014 NOTE Harmonized as EN 61753-071-2:2014 (not modified)
IEC 61753-1:2018 NOTE Harmonized as EN IEC 61753-1:2018 (not modified)
IEC 62343-1 NOTE Harmonized as EN IEC 62343-1
SIST EN IEC 61753-071-2:2021
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 60876-1 - Fibre optic interconnecting devices and EN 60876-1 -
passive components - Fibre optic spatial
switches - Part 1: Generic specification
IEC 61300 series Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
SIST EN IEC 61753-071-2:2021
Publication Year Title EN/HD Year
IEC 61300-2-9 - EN 61300-2-9 -
Fibre optic interconnecting devices and
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -- Part 3-2:
Examinations and measurements -
Polarization dependence of a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
SIST EN IEC 61753-071-2:2021
Publication Year Title EN/HD Year
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-21 - Fibre optic interconnecting devices and EN IEC 61300-3-21 -
passive components - Basic test and
measurement procedures - Part 3-21:
Examinations and measurements -
Switching time
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3-28:
Examinations and measurements -
Transient loss
IEC 61300-3-50 - Fibre optic interconnecting devices and EN 61300-3-50 -
passive components - Basic test and
measurement procedures - Part 3-50:
Examinations and measurements -
Crosstalk for optical spatial switches
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
SIST EN IEC 61753-071-2:2021
SIST EN IEC 61753-071-2:2021
IEC 61753-071-02 ®
Edition 1.0 2020-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components –
Performance standard –
Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial
switches for category C – Controlled environments
Dispositifs d’interconnexion et composants passifs fibroniques –
Norme de performance –
Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2
non connectorisés pour la catégorie C – Environnements contrôlés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-8853-5
SIST EN IEC 61753-071-2:2021
– 2 – IEC 61753-071-02:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test conditions . 8
5 Test report . 8
6 Performance requirements. 9
6.1 Dimensions . 9
6.2 Sample size . 9
6.3 Test details and requirements . 9
Annex A (normative) Sample size . 13
Bibliography . 14
Figure 1 – Configuration of 1 × 2 spatial switch . 7
Figure 2 – Configuration of 2 × 2 spatial switch, non-crossover type . 7
Figure 3 – Configuration of 2 × 2 spatial switch, crossover type . 8
Table 1 – Single-mode spectral bands . 8
Table 2 – Test details and requirements for category C . 9
Table A.1 – Number of samples for each test . 13
SIST EN IEC 61753-071-2:2021
IEC 61753-071-02:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 071-02: Non-connectorized single-mode
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.