EN 61753-071-2:2014

Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments

IEC 61753-071-2:2014 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre optic 1 x 2 and 2 x 2 spatial switches need to satisfy in order to be categorized as meeting the requirements of category C - Controlled environments, as defined in Annex A of IEC 61753-1:2007. Keywords: non-connectorized single-mode fibre optic 1 x 2 and 2 x 2 spatial switches, category C - Controlled environments

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter für die Kategorie C - Kontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C - Environnements contrôlés

L'IEC 61753-071-2:2014 contient les sévérités et les exigences initiales minimales d'essai et de mesure que les commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non connectorisés doivent satisfaire afin d'être classés comme conformes aux exigences de la catégorie C environnements contrôlés, comme spécifiée dans l'Annexe A de l'IEC 61753-1:2007. Mots clés: commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non connectorisés, catégorie C environnements contrôlés,

Optični spojni elementi in pasivne komponente - Tehnični standard - 071-2. del: Prostorska stikala brez konektorjev, 1 x 2 in 2 x 2, za enorodna optična vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-071-2:2014)

Standard EN IEC 61753-071-2 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih morajo prostorska stikala brez konektorjev, 1 x 2 in 2 x 2, za enorodna optična vlakna izpolnjevati, da izpolnjujejo zahteve kategorije C – nadzorovano okolje, kakor je določeno v Dodatku A standarda IEC 61753-1:2007.

General Information

• Status: Withdrawn
• Publication Date: 24-Jul-2014
• Withdrawal Date: 16-Jun-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Oct-2023
• Completion Date: 27-Oct-2023
• Ref Project: SIST EN 61753-071-2:2014 - Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments

Relations

• Replaced By: EN IEC 61753-071-02:2020 - Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
• Effective Date: 24-Dec-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61753-071-2:2014SIST EN 61753-071-2:2014en01-november-2014SIST EN 61753-071-2:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61753-071-2
July 2014 ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments (IEC 61753-071-2:2014)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C - Environnements contrôlés (CEI 61753-071-2:2014)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-2:2014) This European Standard was approved by CENELEC on 2014-06-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-071-2:2014 E SIST EN 61753-071-2:2014

Foreword The text of document 86B/3748/FDIS, future edition 1 of IEC 61753-071-2, prepared by SC 86B "Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-071-2:2014. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-03-17 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-06-17
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-071-2:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300-3-3 NOTE Harmonised as EN 61300-3-3. IEC 61300-3-4 NOTE Harmonised as EN 61300-3-4. IEC 61300-3-6 NOTE Harmonised as EN 61300-3-6. IEC 62343-2 NOTE Harmonised as EN 62343-2. SIST EN 61753-071-2:2014

- 3 - EN 61753-071-2:2014
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60876-1 -
Fibre optic interconnecting devices and passive components - Fibre optic spatial switches -- Part 1: Generic specification EN 60876-1 -
IEC 61300 (Series) -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 (Series) -
IEC 61300-2-1 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 -
IEC 61300-2-4 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 -
IEC 61300-2-9 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-9: Tests - Shock EN 61300-2-9 -
IEC 61300-2-14 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-14: Tests - High optical power EN 61300-2-14 -
IEC 61300-2-17 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-17: Tests - Cold EN 61300-2-17 -
IEC 61300-2-18 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 -
IEC 61300-2-19 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 -
IEC 61300-2-22 -
Basic test and measurement procedures - Part 2-22: Tests - Change of temperature - -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 -
IEC 61300-2-44 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 -
IEC 61300-3-2 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 -
IEC 61300-3-7 (mod) -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 -
IEC 61300-3-20 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 -
IEC 61300-3-21 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time EN 61300-3-21 -
IEC 61300-3-50 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches EN 61300-3-50 -
IEC 61753-1 2007
Fibre optic interconnecting devices and passive components performance standard -- Part 1: General and guidance for performance standards EN 61753-1 2007
IEC 61753-071-2 Edition 1.0 2014-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components – Performance standard –
Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C – Controlled environments
Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme de performance –
Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C – Environnements contrôlés INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1579-1
– 2 – IEC 61753-071-2:2014 © IEC 2014 CONTENTS
FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Test conditions . 7 5 Test report . 8 6 Reference components . 8 7 Performance requirements. 8 7.1 Dimensions . 8 7.2 Test details and requirements . 8 Annex A (normative)
Sample size . 13 Bibliography . 14
Figure 1 – Configuration of 1 × 2 spatial switch . 6 Figure 2 – Configuration of 2 × 2 spatial switch, non-crossover type . 7 Figure 3 – Configuration of 2 × 2 spatial switch, crossover type . 7
Table 1 – Single-mode spectral bands . 8 Table 2 – Test details and requirements . 8 Table A.1 – Number of samples for each test . 13
IEC 61753-071-2:2014 © IEC 2014 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 071-2: Non-connectorized single-mode fibre optic
1 × 2 and 2 × 2 spatial switches for category C –
Controlled environments
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is dr
...