EN 61158-5-15:2012
(Main)Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements
Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements
IEC 61158-5-15:2010(E) specifies the structure and services of the type 15 IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI Application Layer Structure (ISO/IEC 9545). This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main change with respect to the previous edition are editorial corrections.
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-15: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 15-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-15: Définition des services des couches d'application - Eléments de type 15
L'IEC 61158-5-15:2010 vise à définir les services mis en place pour a) l’utilisateur de FAL à la frontière entre l’utilisateur et la Couche application du Modèle de référence de bus de terrain; et b) la Gestion des systèmes au niveau de la frontière entre la Couche application et la Gestion des systèmes selon le Modèle de référence de bus de terrain. La présente partie de l’IEC 61158 spécifie la structure et les services de la couche application de bus de terrain IEC type 15, en conformité au modèle de référence de base OSI (ISO/IEC 7498) et à la structure de couche application OSI (ISO/IEC 9545).
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-15. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 15 (IEC 61158-5-15:2010)
Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 14. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 14 v zvezi z a) abstraktnim modelom za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil, b) primitivnimi dejanji in dogodki opravila; c) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; ter d) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je opredeliti opravila, ki se zagotavljajo za a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnih vodil ter b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanje sistemov referenčnega modela procesnih vodil. Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil tipa 14 v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-5-15:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-15. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 15 (IEC 61158-5-15:2010)
Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer
service definition - Type 15 elements (IEC 61158-5-15:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-15: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 15-Elemente (IEC 61158-5-15:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-15:
Définition des services des couches d'application - Eléments de type 15 (CEI 61158-5-
15:2010)
Ta slovenski standard je istoveten z: EN 61158-5-15:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61158-5-15
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-15:2008
English version
Industrial communication networks -
Fieldbus specifications -
Part 5-15: Application layer service definition -
Type 15 elements
(IEC 61158-5-15:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-15: Définition des services des Teil 5-15: Dienstfestlegungen des
couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 15 Typ 15-Elemente
(CEI 61158-5-15:2010) (IEC 61158-5-15:2010)
This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-15:2012 E
Foreword
The text of document 65C/606/FDIS, future edition 2 of IEC 61158-5-15, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-15:2012.
The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-15:2008.
15:2008:
— editorial corrections.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-5-15:2010 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 61158-5-15:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC/TR 61158-1 2010 Industrial communication networks - Fieldbus CLC/TR 61158-1 2010
specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
IEC 61158-6-15 2010 Industrial communication networks - Fieldbus EN 61158-6-15 2012
specifications -
Part 6-15: Application layer protocol
specification - Type 15 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of basic
notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
IEC 61158-5-15 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-15: Application layer service definition – Type 15 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XF
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-110-6
– 2 – 61158-5-15 © IEC:2010(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
1.1 Overview .8
1.2 Specifications.9
1.3 Conformance.9
1.4 Type overview .10
2 Normative references .10
3 Terms and definitions, abbreviations, symbols and conventions .11
3.1 Terms and definitions .11
3.2 Abbreviations and symbols.19
3.3 Conventions .20
4 Concepts .23
4.1 Common concepts.23
4.2 Client/server specific concepts .23
4.3 Publish/subscribe specific concepts .32
5 Data type ASE.41
5.1 General .41
5.2 Formal definition of data type objects .41
5.3 FAL defined data types.41
5.4 Data type ASE service specification .54
6 Client/server communication model specification.54
6.1 ASEs.54
6.2 ARs .113
6.3 Summary of FAL classes .116
6.4 Permitted FAL services by AREP role. 116
7 Publish/subscribe communication model specification . 118
7.1 ASEs.118
7.2 ARs .137
7.3 Summary of FAL classes .139
7.4 Permitted FAL services by AREP role and sub-role . 139
Bibliography.140
Figure 1 – Client/server stacks.24
Figure 2 – Client/server communication on different buses or networks .24
Figure 3 – Client/server APOs services conveyed by the FAL .25
Figure 4 – Interpretation as distinct tables .26
Figure 5 – Interpretation as overlapping tables .27
Figure 6 – APO and real objects, non obvious possible interpretation .27
Figure 7 – ASE service conveyance.29
Figure 8 – Client/server confirmed interaction .30
Figure 9 – Client/server AR confirmed service primitives (positive case) .31
Figure 10 – Client/server AR confirmed service primitives (negative case).31
Figure 11 – Client/server unconfirmed interaction .32
61158-5-15 © IEC:2010(E) – 3 –
Figure 12 – Client/server AR unconfirmed service primitives.32
Figure 13 – Publish/subscribe communications stacks .33
Figure 14 – Publish/subscribe data-centric exchanges between decoupled network
objects.34
Figure 15 – Publish/subscribe APOs services conveyed by the FAL.35
Figure 16 – Examples of publish/subscribe configurable behaviors via QoS.36
Figure 17 – Pull model interactions .38
Figure 18 – Push model interactions .39
Figure 19 – Publish/subscribe model interactions.40
Figure 20 – Status bit sequence numbering .44
Figure 21 – ObjectId .48
Figure 22 – Bitmap .52
Figure 23 – ParameterSequence.54
Figure 24 – FAL ASEs .55
Figure 25 – Client/server encapsulated interface mechanism .102
Figure 26 – Publish/subscribe class derivations and relationships. 118
Figure 27 – FAL ASEs and classes .119
Figure 28 – Publish/subscribe service request composition. 129
Table 1 – Common client/server APOs.25
Table 2 – Class identification .49
Table 3 – Assigned vendor IDs .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.