EN 61158-6-15:2012

Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements

IEC 61158-6-15:2010(E) specifies the protocol of the Type 15 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). It defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-15:2010, and the externally visible behavior associated with their transfer. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main changes with respect to the previous edition are editorial corrections.

Industrielle Kommunikationsnetze - Feldbusse - Teil 6-15: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 15-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-15: Spécification des protocoles des couches d'application - Eléments de type 15

L'IEC 61158-6-15:2010 fournit des éléments communs pour les communications de messagerie prioritaires et non prioritaires élémentaires entre les programmes d’application des environnements d’automatisation et le matériel spécifique au bus de terrain de type 15. On utilise le terme "prioritaire" pour traduire la présence d’une fenêtre temporelle, à l’intérieur de laquelle une ou plusieurs actions spécifiées doivent être terminées avec un niveau de certitude défini. Si les actions spécifiées ne sont pas terminées à l’intérieur de cette fenêtre temporelle, les applications qui ont demandé l’exécution de ces actions risquent de présenter des dysfonctionnements, accompagnés de risques pour les équipements, l’usine, voire les vies humaines. La présente norme définit d’une manière abstraite le comportement visible de manière externe fourni par la couche application du bus de terrain de type 15 en termes a) de syntaxe abstraite définissant les unités de données de protocole de couche application transmises entre les entités d’application communicantes, b) de syntaxe de transfert définissant les unités de données de protocole de couche application transmises entre les entités d’application communicantes, c) de diagramme d’états de contexte d’application définissant le comportement de service d’application visible entre les entités d’application communicantes; et d) de diagramme d’états de relation d’application définissant le comportement de communication visible entre les entités d’application communicantes.

Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-15. del: Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 15 (IEC 61158-6-15:2010)

Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 15. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno vedenje, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 15 v zvezi z a) abstraktno sintakso, ki opredeljuje podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo, b) prenosno sintakso, ki opredeljuje podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo, c) strojem stanj aplikacijskega konteksta, ki opredeljuje vedenje aplikacijskega opravila, vidnega med aplikacijskimi osebki, ki komunicirajo, in d) stroji stanj aplikacijskega razmerja, ki opredeljujejo komunikacijsko vedenje med aplikacijskimi osebki, ki komunicirajo. Namen tega standarda je opredeliti protokol za a) določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-15 in b) določitev zunanje vidnega vedenja, povezanega z njihovim prenosom.

General Information

• Status: Published
• Publication Date: 21-Jun-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jun-2012
• Completion Date: 22-Jun-2012
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-6-15:2012 - Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements (IEC 61158-6-15:2010)

Relations

• Replaces: EN 61158-6-15:2008 - Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-6-15:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-15. del:
Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 15 (IEC 61158-6-
15:2010)
Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer
protocol specification - Type 15 elements (IEC 61158-6-15:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-15: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 15-Elemente (IEC 61158-6-15:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-15:
Spécification des protocoles des couches d'application - Eléments de type 15 (CEI
61158-6-15:2010)
Ta slovenski standard je istoveten z: EN 61158-6-15:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-6-15
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-15:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 6-15: Application layer protocol specification -
Type 15 elements
(IEC 61158-6-15:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 6-15: Spécification des protocoles Teil 6-15: Protokollspezifikation des
des couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 15 Typ 15-Elemente
(CEI 61158-6-15:2010) (IEC 61158-6-15:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-6-15:2012 E
Foreword
The text of document 65C/607/FDIS, future edition 2 of IEC 61158-6-15, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-15:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-6-15:2008.
15:2008:
– editorial corrections.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-6-15:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC/TR 61158-1:2010 NOTE  Harmonized as CLC/TR 61158-1:2010 (not modified).

- 3 - EN 61158-6-15:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61158-5-15 2010 Industrial communication networks - Fieldbus EN 61158-5-15 2012
specifications -
Part 5-15: Application layer service definition -
Type 15 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of basic
notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure

IEC 61158-6-15 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-15: Application layer protocol specification – Type 15 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XD
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-131-1
– 2 – 61158-6-15 © IEC:2010(E)
CONTENTS
FOREWORD.0H6
INTRODUCTION.1H8
1 Scope.2H9
1.1 General .3H9
1.2 Specifications.4H9
1.3 Conformance.5H10
2 Normative references .6H10
3 Terms and definitions, abbreviations, symbols and conventions .7H10
3.1 Terms and definitions .8H10
3.2 Abbreviations and symbols.9H17
3.3 Conventions .10H19
3.4 Conventions used in state machines .11H21
4 Abstract syntax for client/server .12H22
5 Transfer syntax for client/server .13H22
5.1 General .14H22
5.2 Common APDU structure .15H22
5.3 Service-specific APDU structures .16H26
5.4 Data representation ‘on the wire’ .17H51
6 Abstract syntax for publish/subscribe .18H51
7 Transfer syntax for publish/subscribe .19H52
7.1 General .20H52
7.2 APDU structure .21H52
7.3 Sub-message structure .22H53
7.4 APDU interpretation .23H55
7.5 Service specific APDU structures .24H57
7.6 Common data representation for publish/subscribe .25H79
8 Structure of FAL protocol state machines .26H83
9 AP-context state machines for client/server .27H85
10 FAL service protocol machine (FSPM) for client/server.28H85
10.1 General .29H85
10.2 FSPM state tables .30H85
10.3 Functions used by FSPM.31H92
10.4 Parameters of FSPM/ARPM primitives .32H92
10.5 Client/server server transactions .33H92
11 Application relationship protocol machines (ARPMs) for client/server .34H94
11.1 Application relationship protocol machines (ARPMs) .35H94
11.2 AREP state machine primitive definitions .36H95
11.3 AREP state machine functions .37H96
12 DLL mapping protocol machine (DMPM) for client/server.38H96
12.1 AREP mapping to data link layer .39H96
12.2 DMPM states.40H97
12.3 DMPM state machine .41H97
12.4 Primitives exchanged between data link layer and DMPM .42H98
12.5 Client/server on TCP/IP.43H98
13 AP-Context state machines for publish/subscribe .44H102

61158-6-15 © IEC:2010(E) – 3 –
14 Protocol machines for publish/subscribe.45H102
14.1 General .46H102
14.2 Publish/subscribe on UDP .47H104
Bibliography.48H105

Figure 1 – APDU Format.49H22
Figure 2 – Client to server confirmed service request.50H24
Figure 3 – Normal response from server to client.51H24
Figure 4 – Exception response from server to client.52H24
Figure 5 – Client to server unconfirmed service request.53H25
Figure 6 – Publish/subscribe APDU .54H52
Figure 7 – Flags of issue request .55H58
Figure 8 – Flags of heartbeat request .56H60
Figure 9 – Flags of VAR request .57H64
Figure 10 – Flags of GAP request .58H66
Figure 11 – Flags of ACK request .59H68
Figure 12 – Flags of INFO_DST request .60H72
Figure 13 – Flags of INFO_REPLY request.61H73
Figure 14 – Flags of INFO_SRC request.62H75
Figure 15 – Flags of INFO_TS request.
...