iTeh Standards logo
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60721-2-4:2018/AC:2018-12

(Corrigendum)

Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature

Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature

TC - superseding information corrected

Klassifizierung von Umgebungsbedingungen - Teil 2-4: Natürliche Umgebungsbedingungen - Sonnenstrahlung und Temperatur

Classification des conditions d'environnement - Partie 2-4: Conditions d'environnement présentes dans la nature - Rayonnement solaire et température

Klasifikacija okoljskih pogojev - 2-4. del: Okoljski pogoji v naravi - Sončno sevanje in temperatura - Popravek AC

General Information

Status
Published
Publication Date
20-Dec-2018
ICS
19.040 - Environmental testing
Technical Committee
CLC/SR 104 - Environmental conditions, classification and methods of test
Drafting Committee
CLC/SR 104 - Environmental conditions, classification and methods of test
Current Stage
6060 - Document made available - Publishing
Start Date
21-Dec-2018
Completion Date
21-Dec-2018
Ref Project
SIST EN IEC 60721-2-4:2018/AC:2019 - Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature

Relations

Corrects
EN IEC 60721-2-4:2018 - Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
Effective Date
11-Dec-2018
EN IEC 60721-2-4:2018/AC:2019EN IEC 60721-2-4:2018/AC:2019
PreviousNext
Corrigendum
EN IEC 60721-2-4:2018/AC:2019
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klassifizierung von Umgebungsbedingungen - Teil 2-4: Natürliche Umgebungsbedingungen - Sonnenstrahlung und TemperaturClassification des conditions d'environnement - Partie 2-4: Conditions d'environnement présentes dans la nature - Rayonnement solaire et températureClassification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature19.040Presk
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CLC
EN 60068-2-75:2014/A1:2025(Amendment)
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
SIST EN IEC 60068-2-75:2014/kFprA1:2025

The content of the corrigendum 1 of amendment 1 (2025-12) applies only to the French version.

  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-1:2025(Main)
Environmental testing - Part 2-1: Tests - Test A: Cold
SIST EN IEC 60068-2-1:2026

IEC 60068-2-1:2025 specifies temperature tests at low temperatures, generally referred to as "cold tests", that are applicable to non-heat-dissipating and heat-dissipating specimens, to determine the ability of components, equipment, or other articles to be used, transported or stored at low temperature. This document is applicable to energized as well as non-energized specimens that normally achieve temperature stability during the test. The specimens can be subject to test in packed condition (to simulate transportation and storage) or in unpacked condition (to simulate use). This document does not specify tests to determine the impact of temperature changes on specimens. This seventh edition cancels and replaces the sixth edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the introduction and scope; b) inclusion of new figures and symbols for clarification purposes; c) clarification of the test procedure for ascertaining high or low air velocity in the test chamber; d) clarification of the requirements for measuring points around, on or in specimens; e) reintroduction of the nomogram procedure for the correction of the conditioning temperature when testing with high air velocity (Test Ad and Test Ae); f) revision of the temperature tolerances of the test; g) revision of standardized requirements for the relevant specification and test report; h) inclusion of the advantages and disadvantages of the testing procedures.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-2:2025(Main)
Environmental testing - Part 2-2: Tests - Test B: Dry heat
SIST EN IEC 60068-2-2:2026

IEC 60068-2-2:2025 specifies dry heat temperature tests that are applicable to non-heat-dissipating and heat-dissipating specimens, to determine the ability of components, equipment or other articles to be used, transported or stored at high temperature. This document is applicable to energized as well as non-energized specimens that normally achieve temperature stability during the test. The specimens can be subject to test in packed condition (to simulate transportation and storage) or in unpacked condition (to simulate use). This document does not specify tests to determine the impact of temperature changes on specimens. This sixth edition cancels and replaces the fifth edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the introduction and scope; b) inclusion of new figures and symbols for clarification purposes; c) clarification of the test procedure for ascertaining high or low air velocity in the test chamber; d) clarification of the requirements for measuring points around, on or in specimens; e) reintroduction of the nomogram procedure for the correction of the conditioning temperature when testing with high air velocity (Test Bd and Test Be); f) revision of the temperature tolerances of the test; g) revision of standardized requirements for the relevant specification and test report; h) inclusion of the advantages and disadvantages of the testing procedures.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-30:2025(Main)
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
SIST EN IEC 60068-2-30:2025

IEC 60068-2-30:2025 specifies a test procedure to determine the suitability of components, equipment, or other articles for use, transportation, and storage under conditions of high humidity combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. This test method can also be used to validate the packaging of specimen for transportation and storage. This fourth edition cancels and replaces the third edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the requirements for the test chamber; b) change of the temperature tolerances of the test to limits; c) updating of the figures for clarification purposes; d) revision of the limits of the temperature and relative humidity during conditioning; e) revision of the intermediate measurements; f) revision of standardized requirements for the test report.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-78:2025(Main)
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
SIST EN IEC 60068-2-78:2025

IEC 60068-2-78:2025 establishes a test method for determining the ability of components or equipment to withstand transportation, storage and use under conditions of high humidity. The object of this document is to investigate the effect of high humidity at constant temperature without condensation on a specimen over a specified period. It is applicable to small equipment or components as well as large equipment and can be applied to both heat-dissipating and non-heat-dissipating specimens. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the requirements for the test chamber; b) revision of the severities and including the dew point temperatures; c) change of the temperature tolerances of the test to limits; d) inclusion of a specified preconditioning procedure; e) inclusion of a new figure for clarification purposes; f) revision of standardized requirements for the test report.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-14:2025(Main)
Environmental testing - Part 3-14: Supporting documentation and guidance - Developing a climatic sequential test
SIST EN IEC 60068-3-14:2025

IEC 60068-3-14:2025 describes a generic process for developing a climatic sequential test programme by sequencing test methods selected from the IEC 60068-2 series. This generic process comprises a systematic approach to the development of a sequential environmental test programme. A climatic sequential test is applicable to electrical, electromechanical or electronic equipment and devices, as well as their subassemblies, constituent parts and components. It can be customized according to specific product requirements and applications. The process is designed for use by product designers, manufacturers and users. The process is particularly relevant to electrical products which include components or materials that have the potential to degrade, as a consequence of environmental exposures.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-3-6:2025(Main)
Classification of environmental conditions - Part 3-6: Classification of groups of environmental parameters and their severities - Ship environments
SIST EN IEC 60721-3-6:2025

IEC 60721-3-6:2025 classifies the groups of environmental parameters and their severities to which a product is subjected when installed aboard a ship. Ships where electrotechnical products may be permanently or temporarily installed include - ships propelled by mechanical means, including mobile offshore units, and - ships not propelled by mechanical means, including sailing boats and life rafts. The classes defined apply to all sizes of ship from pleasure craft to trawlers, ferry boats, icebreakers, cargo ships including tankers. The areas in which ships normally navigate are - inland waterways (canals, rivers, lakes etc.), - coastal waters, and - oceans. Areas where ships navigate in ice are also included. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. This edition includes the following significant changes with respect to the previous edition: a) most classes have been replaced by completely new classes based on the use of new information obtained from referenced Technical Reports; b) Table 1 through to Table 5 have been updated; c) the content of Annex A and Annex B has either been incorporated into main body text or deleted.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-2-2:2024(Main)
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
SIST EN IEC 60721-2-2:2025

IEC 60721-2-2:2024 presents fundamental properties, quantities for characterization, and a classification of environmental conditions dependent on precipitation and wind relevant to electrotechnical products. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the layout of the information provided has been re-organized; b) the information provided has been extensively enhanced and revised; c) new information on wind severities has been included.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-87:2024(Main)
Environmental testing - Part 2-87: Tests - UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications
SIST EN IEC 60068-2-87:2025

IEC 60068-2-87:2024 describes exposures of materials and components to UV-C radiation during ultraviolet germicidal irradiation (UVGI) treatments or other processes that require UV‑C exposure and test procedures to simulate those environments. Severities representing various frequencies and intensities of UV-C exposures are described. Test conditions are described and limited to devices that utilize low pressure mercury lamps which emit most of their radiation at a single spectral line at 254 nm.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-3-1:2018/AC:2024-10(Corrigendum)
Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and their severities - Storage
SIST EN IEC 60721-3-1:2018/AC:2024
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day