EN IEC 61968-13:2021

Application integration at electric utilities - System interfaces for distribution management - Part 13: Common distribution power system model profiles

IEC 61968-13:2021 specifies profiles that can be used to exchange Network Models in a Utility or between a Utility and external applications to the utility. This document provides a list of profiles which allow to model balanced and unbalanced distribution networks in order to conduct network analysis (Power flow calculation). Therefore it leverages already existing profiles (IEC 61970-45x based on IEC 61970-301 (CIM base) or profiles based on IEC 61968­11 CIM extension for Distribution). This document reuses some profiles without any change, or eventually extends them or restricts them. Moreover it proposes other profiles to reflect Distribution needs. Use of CIM in Distribution is not a new topic. This document includes informative parts, as CIM model extensions, which could be integrated in future versions of the IEC CIM Model. These extensions have been used by some utilities for utility internal information exchange use cases and to support information exchanges between different market participants like Transmisstion System Operators (TSO), Distributed System Operators (DSO), Distributed Network Operators (DNO) and Significant Grid Users (SGU) including generators and industry. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision. This edition was pre-tested during 2016 ENTSO-E interoperability tests. The interoperability test report mentions: "Some vendors demonstrated that the transformation between distribution network and CGMES is possible. This is a first step towards the efforts to have closer integration between CGMES and profiles for exchanging distribution data (CDPSM)."

Integration von Anwendungen in Anlagen der Elektrizitätsversorgung – Systemschnittstellen für Netzführung – Teil 13: Allgemeine Profile zur Modellierung von Verteilnetzen

Intégration d'applications pour les services électriques - Interfaces système pour la gestion de la distribution - Partie 13: Profils de modèle commun de système électrique de distribution

IEC 61968-13:2021 spécifie les profils pouvant être utilisés pour échanger des modèles de réseau chez un fournisseur ou entre un fournisseur et des applications qui lui sont externes. Le présent document fournit une liste de profils qui permettent de modéliser des réseaux de distribution équilibrés et déséquilibrés afin d’effectuer une analyse réseau (calcul du flux de puissance). Par conséquent elle optimise les profils existants (IEC 61970-45x fondée sur l’IEC 61970-301 (base CIM) ou les profils fournis fondés sur l’IEC 61968-11 Extensions du CIM pour la distribution). Le présent document réutilise certains profils sans changement, ou finit par les étendre ou les restreindre. De plus, il propose d’autres profils qui reflètent les besoins de distribution. L'utilisation du CIM dans la distribution n'est pas un sujet nouveau. Plusieurs documents peuvent être intéressants. Le présent document inclut des parties informatives, comme des extensions de modèle CIM, qui peuvent être intégrées dans les versions futures de modèle CIM de l’IEC. Ces extensions ont été utilisées par certains fournisseurs pour les cas d’utilisation d’échange d’informations interne et pour soutenir les échanges d’informations entre les différents acteurs du marché comme les gestionnaires de réseau de transport (GRT), les gestionnaires de réseau de distribution (GRD), les exploitants de réseau de distribution (ERD) et les utilisateurs significatifs du réseau (USR), y compris les générateurs et l’industrie (voir l’Annexe J pour un exemple). Cette deuxième édition annule et remplace la première édition parue en 2008. Cette édition constitue une révision technique. Cette édition a été soumise à un préessai pendant les essais d’interopérabilité de l’ENTSO-E en 2016. Le rapport d’essai d’interopérabilité mentionne: "Certains vendeurs ont démontré que la transformation entre le réseau de distribution et la spécification d’échange de modèle de réseau commun (CGMES – common grid model exchange specification) est possible. Il s’agit de la première étape de l’intégration entre la CGMES et les profils d'échange de données de distribution (CDPSM)."

Združevanje aplikacij pri oskrbi z električno enegijo - Sistemski vmesniki za upravljanje distribucije - 13. del: Skupni profili modela moči v distribuciji

General Information

• Status: Published
• Publication Date: 22-Apr-2021
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: CLC/TC 57 - Power systems management and associated information exchange
• Drafting Committee: IEC/TC 57 - IEC_TC_57
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 23-Apr-2021
• Completion Date: 23-Apr-2021
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN IEC 61968-13:2021 - Application integration at electric utilities - System interfaces for distribution management - Part 13: Common distribution power system model profiles

Relations

• Replaces: EN 61968-13:2008 - Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2021
Nadomešča:
SIST EN 61968-13:2008
Združevanje aplikacij pri oskrbi z električno enegijo - Sistemski vmesniki za
upravljanje distribucije - 13. del: Skupni profili modela moči v distribuciji
Application integration at electric utilities - System interfaces for distribution management
- Part 13: Common distribution power system model profiles
Ta slovenski standard je istoveten z: EN IEC 61968-13:2021
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61968-13

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 33.200 Supersedes EN 61968-13:2008 and all of its
amendments and corrigenda (if any)
English Version
Application integration at electric utilities - System interfaces for
distribution management - Part 13: Common distribution power
system model profiles
(IEC 61968-13:2021)
Intégration d'applications pour les services électriques - Integration von Anwendungen in Anlagen der
Interfaces système pour la gestion de la distribution - Partie Elektrizitätsversorgung - Systemschnittstellen für
13: Profils de modèle commun de système électrique de Netzführung - Teil 13: Allgemeine Profile zur Modellierung
distribution von Verteilnetzen
(IEC 61968-13:2021) (IEC 61968-13:2021)
This European Standard was approved by CENELEC on 2021-04-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61968-13:2021 E

European foreword
The text of document 57/2311/FDIS, future edition 2 of IEC 61968-13, prepared by IEC/TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61968-13:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-01-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-20
document have to be withdrawn
This document supersedes EN 61968-13:2008 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61968-13:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
1 2
IEC 61970-600-1 NOTE Harmonized as EN IEC 61970-600-1
3 4
IEC 61970-600-2 NOTE Harmonized as EN IEC 61970-600-2
IEC 61968-1 NOTE Harmonized as EN IEC 61968-1
IEC 61970-456 NOTE Harmonized as EN IEC 61970-456
IEC 61970-453 NOTE Harmonized as EN 61970-453
IEC 61968-4:2019 NOTE Harmonized as EN IEC 61968-4:2019 (not modified)
IEC 61968-8:2015 NOTE Harmonized as EN 61968-8:2016 (not modified)
IEC 60909 (series) NOTE Harmonized as EN 60909 (series)
IEC 61850-7-3 NOTE Harmonized as EN 61850-7-3
IEC 61968-3 NOTE Harmonized as EN IEC 61968-3
IEC 62559-2:2015 NOTE Harmonized as EN 62559-2:2015 (not modified)

Under preparation. Stage at the time of publication: IEC PRVC 61970-600-1:2020.
Under preparation. Stage at the time of publication: FprEN IEC 61970-600-1:2021.
Under preparation. Stage at the time of publication: IEC PRVC 61970-600-2:2020.
Under preparation. Stage at the time of publication: FprEN IEC 61970-600-2:2021.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC/TS 61968-2 - Application integration at electric utilities - -
- System interfaces for distribution
management - Part 2: Glossary
IEC 61968-11 2013 Application integration at electric utilities EN 61968-11 2013
- System interfaces for distribution
management - Part 11: Common
information model (CIM) extensions for
distribution
IEC 61970-301 2020 Energy management system application EN IEC 61970-301 2020
program interface (EMS-API) - Part 301:
Common information model (CIM) base
IEC 61970-452 - Energy management system application EN 61970-452 -
program interface (EMS-API) - Part 452:
CIM static transmission network model
profiles
IEC 61970-501 2006 Energy management system application EN 61970-501 2006
program interface (EMS-API) - Part 501:
Common Information Model Resource
Description Framework (CIM RDF)
schema
IEC 61970-552 2016 Energy management system application EN 61970-552 2016
program interface (EMS-API) - Part 552:
CIMXML Model exchange format
IEC 62325-301 - Framework for energy market EN IEC 62325-301 -
communications - Part 301: Common
information model (CIM) extensions for
markets
IEC 61968-13 ®
Edition 2.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Application integration at electric utilities – System interfaces for distribution

management –
Part 13: Common distribution power system model profiles

Intégration d'applications pour les services électriques – Interfaces système

pour la gestion de la distribution –

Partie 13: Profils de modèle commun de système électrique de distribution

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.200 ISBN 978-2-8322-9305-8

– 2 – IEC 61968-13:2021  IEC 2021
CONTENTS
FOREWORD . 25
INTRODUCTION . 28
1 Scope . 29
2 Normative references . 29
3 Terms, definitions and abbreviated terms . 30
3.1 Terms and definitions . 30
3.2 Abbreviated terms . 31
4 Use Cases list . 31
4.1 Use Cases related to the Common Distribution Power System Model Profiles . 31
4.2 Use Case overview table. 34
5 Distribution network modelling specificities and CIM related issues resolved . 35
5.1 Feeder modelling . 35
5.2 Partial-phase devices modelling . 36
5.3 Manage LV cables in catalog . 37
5.4 Observability Area (informative) . 38
6 CIM Distribution Power System Model Profiles . 39
6.1 General . 39
6.2 Top package General . 43
6.3 Package Functional . 45
6.3.1 General . 45
6.3.2 Package Standard . 58
6.4 Package ElectricalProperties . 151
6.4.1 General . 151
6.4.2 Package Standard . 154
6.5 Package Topology . 180
6.5.1 General . 180
6.5.2 Package Standard . 181
6.6 Package SteadyStateHypothesis. 187
6.6.1 General . 187
6.6.2 Package Standard . 189
6.7 Package StateVariables . 201
6.7.1 General . 201
6.7.2 Package Standard . 203
6.8 Package Geographical . 206
6.8.1 General . 206
6.8.2 Package Standard . 207
6.9 Package DiagramLayout . 210
6.9.1 General . 210
6.9.2 Package Standard . 212
6.10 Package Assets . 217
6.10.1 General . 217
6.10.2 Package Standard . 218
6.11 Package AssetCatalog . 228
6.11.1 General . 228
6.11.2 Package Standard . 233
6.12 Package Customers . 252

IEC 61968-13:2021  IEC 2021 – 3 –
6.12.1 General . 252
6.12.2 Package Standard . 253
7 Top package DataTypes .
...