EN 61755-3-2:2009
(Main)Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
This part of IEC 61755 defines certain dimensional limits of a 2,5 mm and a 1,25mm diameter cylindrical zirconia (ZrO2) 8 degrees angled-PC (APC) ferrule optical interface to meet specific requirements for connecting fibre to fibre interconnection. Ferrules made from the material specified in this document are suitable for use in categories C, U, E and O as defined in IEC 61753-1. The contents of the corrigendum of January 2009 have been included in this copy.
Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-2: Optische Schnittstellen mit 8° abgeschrägten Zirkonium-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser für Einmodenfasern mit physikalischem Kontakt
Interfaces optiques de connecteurs pour fibres optiques - Partie 3-2: Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, pour fibres unimodales à angle PC de 8 degrés
La présente partie de la CEI 61755 définit certaines limites dimensionnelles des interfaces optiques à férule à angle PC (APC) 8 degrés, en zircone (ZrO2), cylindrique de diamètres 2,5 mm et 1,25 mm devant être satisfaites pour répondre aux exigences particulières d'une interconnexion fibre-à-fibre. Les férules constituées par le matériau spécifié dans ce document sont adaptées à une utilisation dans les catégories C, U, E et O définies dans la CEI 61753-1. Le contenu du corrigendum de janvier 2009 a été pris en considération dans cet exemplaire.
Optični vmesniki konektorja optičnih vlaken - 3-2. del: Optični vmesnik, cilindrične tulke iz polnega cirkonija s premeroma 2,5 mm in 1,5 mm za PC enorodna optična vlakna za spajanje pod kotom 8 stopinj (IEC 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-2: Optische Schnittstellen von Zirkonium-Stiften mit 2,5 mm und 1,25 mm Durchmesser für 8° angeschrägte Einmodenfasern mit physikalischem Kontakt (IEC 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)Interfaces optiques de connecteurs pour fibres optiques - Partie 3-2: Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, pour fibres unimodales à angle PC de 8 degrés (CEI 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61755-3-2:2009SIST EN 61755-3-2:2009en,fr01-maj-2009SIST EN 61755-3-2:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 61755-3-2 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-3-2:2009 E
ICS 33.180.20
English version
Fibre optic connector optical interfaces -
Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical full zirconia ferrules
for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006, modified + corrigendum 2009)
Interfaces optiques de connecteurs
pour fibres optiques -
Partie 3-2: Interfaces optiques,
férules PC en zircone plein cylindrique
de diamètre 2,5 mm et 1,25 mm,
pour fibres unimodales
à angle PC de 8 degrés (CEI 61755-3-2:2006, modifiée + corrigendum 2009)
Optische Schnittstellen
für Lichtwellenleiter-Steckverbinder -
Teil 3-2:Optische Schnittstellen
mit 8° abgeschrägten Zirkonium-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser
für Einmodenfasern mit
physikalischem Kontakt (IEC 61755-3-2:2006, modifiziert + Corrigendum 2009)
This European Standard was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop)
2009-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-12-01 __________ Endorsement notice The text of the International Standard IEC 61755-3-2:2006 + corrigendum January 2009 was approved by CENELEC as a European Standard with agreed common modifications as given below. COMMON MODIFICATIONS Table 1 – Optical interface parameter values for 2,5 mm diameter ferrule In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm). Table 2 – Optical interface parameter values for 1,25 mm diameter ferrule In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm). Bibliography The following notes have to be added for the standards indicated: IEC 61753-1 NOTE
Harmonized as EN 61753-1:2007 (not modified). IEC 61755-2-2 NOTE
Harmonized as EN 61755-2-2:2006 (not modified). ___________ SIST EN 61755-3-2:2009
NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61755-3-2Première éditionFirst edition2006-07 Interfaces optiques de connecteurs
pour fibres optiques – Partie 3-2:
Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, pour fibres unimodales à angle PC de 8 degrés
Fibre optic connector optical interfaces – Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2006
Droits de reproduction réservés
Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE L Commission Electrotechnique InternationaleInternational Electrotechnical CommissionSIST EN 61755-3-2:2009
61755-3-2 IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC CONNECTOR OPTICAL INTERFACES –
Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical
full zirconia ferrules for 8 degrees angled-PC single mode fibres
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61755-3-2 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86 Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86B/2307/FDIS 86B/2361/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. SIST EN 61755-3-2:2009
61755-3-2 IEC:2006 – 5 –
This publication has been drafted
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.