EN 61158-4-3:2012

Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements

2012-03-22 - Publication editing allocated to [e-mail] * Project handled under parallel procedures as FprEN 61158-400 and split into 9 subparts to be published as EN 61158-4-2, 3, 11, 12, 14, 18, 19, 21 and 22 * Supersedes EN 61158-4-3:2008

Industrielle Kommunikationsnetze - Feldbusse - Teil 4-3: Protokollspezifikation des Data Link Layer (Sicherungsschicht) - Typ 3-Elemente

Réseaux de communication industriels - Spécifications de bus de terrain - Partie 4-3: Spécification du protocole de couche de liaison de données - Eléments de Type 3

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-3. del: Specifikacija protokola na nivoju podatkovnih povezav - Elementi tipa 3 (IEC 61158-4-3:2010)

Nivo podatkovnih povezav omogoča osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Ta protokol omogoča komunikacijske priložnosti za predhodno izbrano »glavno« podmnožico entitet podatkovnih povezav na cikličen asinhron način, zaporedno za vsako od teh entitet podatkovnih povezav. Druge entitete komunicirajo samo na način, ki ga dovolijo in določijo glavne entitete podatkovnih povezav. Za določeno glavno entiteto je lahko njena komunikacija z drugimi entitetami podatkovnih povezav ciklična ali aciklična s prednostnim dostopom ali kombinacija obeh. Ta protokol omogoča sredstvo za razdeljevanje razpoložljivih komunikacijskih virov na pošten način. V njem so določila za časovno sinhronizacijo in za izohrono delovanje.

General Information

• Status: Withdrawn
• Publication Date: 24-May-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Sep-2017
• Completion Date: 19-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-4-3:2012 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements (IEC 61158-4-3:2010)

Relations

• Replaces: EN 61158-4-3:2008 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements
• Effective Date: 29-Jan-2023
• Replaced By: EN 61158-4-3:2014 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements
• Effective Date: 04-Nov-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2012
1DGRPHãþD
SIST EN 61158-4-3:2008
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-3. del:
Specifikacija protokola na nivoju podatkovnih povezav - Elementi tipa 3 (IEC 61158
-4-3:2010)
Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer
protocol specification - Type 3 elements (IEC 61158-4-3:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 4-3: Protokollspezifikation des Data
Link Layer (Sicherungsschicht) - Typ 3-Elemente (IEC 61158-4-3:2010)
Réseaux de communication industriels - Spécifications de bus de terrain - Partie 4-3:
Spécification du protocole de couche de liaison de données - Eléments de Type 3 (CEI
61158-4-3:2010)
Ta slovenski standard je istoveten z: EN 61158-4-3:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-4-3
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-4-3:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 4-3: Data-link layer protocol specification -
Type 3 elements
(IEC 61158-4-3:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications de bus de terrain - Feldbusse -
Partie 4-3: Spécification du protocole de Teil 4-3: Protokollspezifikation des Data
couche de liaison de données - Link Layer (Sicherungsschicht) -
Eléments de Type 3 Typ 3-Elemente
(CEI 61158-4-3:2010) (IEC 61158-4-3:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-4-3:2012 E
Foreword
The text of document 65C/605/FDIS, future edition 2 of IEC 61158-4-3, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-4-3:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-03-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-4-3:2008.
3:2008:
— Corrections in Table A.15 and Table A.16;
— Expired patent removed and added new patents.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-4-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60870-5-1 NOTE  Harmonized as EN 60870-5-1.
IEC/TR 61158-1 NOTE  Harmonized as CLC/TR 61158-1.
IEC 61158-5-3 NOTE  Harmonized as EN 61158-5-3.
IEC 61158-6-3 NOTE  Harmonized as EN 61158-6-3.

- 3 - EN 61158-4-3:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61158-2 2010 Industrial communication networks - Fieldbus EN 61158-2 2010
specifications -
Part 2: Physical layer specification and service
definition
IEC 61158-3-3 2007 Industrial communication networks - Fieldbus EN 61158-3-3 2008
specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
ISO/IEC 2022 - Information technology - Character code - -
structure and extension techniques

ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

ISO 1177 - Information processing - Character structure - -
for start/stop and synchronous character-
oriented transmission
IEC 61158-4-3 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-3: Data-link layer protocol specification – Type 3 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XH
ICS 25.04.40; 35.100.20; 35.110 ISBN 978-2-88912-085-7
– 2 – 61158-4-3 © IEC:2010(E)
CONTENTS
FOREWORD.6
INTRODUCTION.8
1 Scope.10
1.1 General .10
1.2 Specifications.10
1.3 Procedures.10
1.4 Applicability.10
1.5 Conformance.11
2 Normative references .11
3 Terms, definitions, symbols and abbreviations.11
3.1 Reference model terms and definitions.11
3.2 Service convention terms and definitions.13
3.3 Common terms and definitions .14
3.4 Additional Type 3 definitions.16
3.5 Common symbols and abbreviations .18
3.6 Type 3 symbols and abbreviations.19
4 Common DL-protocol elements.23
4.1 Frame check sequence .23
5 Overview of the DL-protocol .25
5.1 General .25
5.2 Overview of the medium access control and transmission protocol .26
5.3 Transmission modes and DL-entity.27
5.4 Service assumed from the PhL .32
5.5 Operational elements .35
5.6 Cycle and system reaction times .50
6 General structure and encoding of DLPDUs, and related elements of procedure .53
6.1 DLPDU granularity .53
6.2 Length octet (LE, LEr) .54
6.3 Address octet .55
6.4 Control octet (FC).57
6.5 DLPDU content error detection.61
6.6 DATA_UNIT .62
6.7 Error control procedures.62
7 DLPDU-specific structure, encoding and elements of procedure .63
7.1 DLPDUs of fixed length with no data field.63
7.2 DLPDUs of fixed length with data field.65
7.3 DLPDUs with variable data field length.67
7.4 Token DLPDU .68
7.5 ASP DLPDU .69
7.6 SYNCH DLPDU .69
7.7 Time Event (TE) DLPDU.69
7.8 Clock Value (CV) DLPDU .69
7.9 Transmission procedures .70
8 Other DLE elements of procedure.73
8.1 DL-entity initialization .73
8.2 States of the media access control of the DL-entity .73

61158-4-3 © IEC:2010(E) – 3 –
8.3 Clock synchronization protocol .79
Annex A (normative) DL-Protocol state machines .84
Annex B (informative) Type 3 (synchronous): exemplary FCS implementations. 160
Annex C (informative) Type 3: Exemplary token procedure and message transfer
periods .162
Bibliography.170

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .15
Figure 2 – Logical token-passing ring .28
Figure 3 – PhL data service for asynchronous transmission .32
Figure 4 – Idle time T .38
ID1
Figure 5 – Idle time T (SDN, CS) .38
ID2
Figure 6 – Idle time T (MSRD) .38
ID2
Figure 7 – Slot time T .39
SL1
Figure 8 – Slot time T .39
SL2
Figure 9 – Slot time T .44
SL1
Figure 10 – Slot time T .
...