EN 61158-5-14:2012
(Main)Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements
Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements
2012-03-22 - Publication editing allocated to cpalagi@cencenelec.eu * Project handled under parallel procedures as FprEN 61158-500 and split into 11 subparts i.e. EN 61158-5-2, 3, 10, 12, 14, 15, 18, 19, 21 and 22 * Supersedes EN 61158-5-14:2008
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-14: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 14-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-14: Définition des services des couches d'application - Eléments de type 14
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-14. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 14 (IEC 61158-5-14:2010)
Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 14. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 14 v zvezi z a) abstraktnim modelom za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil, b) primitivnimi dejanji in dogodki opravila; c) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; ter d) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je opredeliti opravila, ki se zagotavljajo za a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnih vodil ter b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanje sistemov referenčnega modela procesnih vodil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-5-14:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-14. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 14 (IEC 61158-5-14:2010)
Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer
service definition - Type 14 elements (IEC 61158-5-14:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-14: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 14-Elemente (IEC 61158-5-14:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-14:
Définition des services des couches d'application - Eléments de type 14 (CEI 61158-5-
14:2010)
Ta slovenski standard je istoveten z: EN 61158-5-14:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61158-5-14
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-14:2008
English version
Industrial communication networks -
Fieldbus specifications -
Part 5-14: Application layer service definition -
Type 14 elements
(IEC 61158-5-14:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-14: Définition des services des Teil 5-14: Dienstfestlegungen des
couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 14 Typ 14-Elemente
(CEI 61158-5-14:2010) (IEC 61158-5-14:2010)
This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-14:2012 E
Foreword
The text of document 65C/606/FDIS, future edition 2 of IEC 61158-5-14, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-14:2012.
The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-14:2008.
14:2008:
— updated Normative references and Bibliography;
— corrections of the edit error;
— specification changes for CPF3;
— update of the requirements for all conformance classes;
— update of the requirements for all conformance services.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-5-14:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131-1 NOTE Harmonized as EN 61131-1.
IEC/TR 61158-1:2007 NOTE Harmonized as CLC/TR 61158-1:2008 (not modified).
IEC 61158-3-14 NOTE Harmonized as EN 61158-3-14.
IEC 61158-6-14 NOTE Harmonized as EN 61158-6-14.
- 3 - EN 61158-5-14:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61131-3 - Programmable controllers - EN 61131-3 -
Part 3: Programming languages
IEC 61158-4-14 - Industrial communication networks - Fieldbus EN 61158-4-14 -
specifications -
Part 4-14: Data-link layer protocol
specification - Type 14 elements
IEC 61588 - Precision clock synchronization protocol for - -
networked measurement and control systems
ISO/IEC 646 - Information technology - ISO 7-bit coded - -
character set for information interchange
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of basic
notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
IEC 61158-5-14 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-14: Application layer service definition – Type 14 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XD
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-109-0
– 2 – 61158-5-14 © IEC:2010(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 Overview .7
1.2 Specifications.8
1.3 Conformance.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviations and conventions .9
3.1 ISO/IEC 7498-1 terms .9
3.2 ISO/IEC 8822 terms .9
3.3 ISO/IEC 9545 terms .9
3.4 ISO/IEC 8824-1 terms .9
3.5 Fieldbus application-layer specific definitions .9
3.6 Abbreviations and symbols.12
3.7 Conventions .13
4 Concepts .16
5 Data type ASE.16
5.1 Overview .16
5.2 Formal definition of data type objects .16
5.3 FAL defined data types.17
5.4 Data type ASE service specification .38
6 Communication model specification.39
6.1 General .39
6.2 ASEs.39
6.3 Application relationship .88
6.4 Summary of application layer services.91
Bibliography.92
Figure 1 – Application layer entity.39
Figure 2 – Received message processing procedure .64
Figure 3 – AR ASE conveys APDUs between AP .88
Table 1 – Attribute of variable normalised 2 octet .25
Table 2 – Encoding of variable normalised 2 octet .25
Table 3 – Attribute of normalised 4 Octet .26
Table 4 – Encodinge of normalised 4 Octet.26
Table 5 – Attribute of variable normalised 2 octet .26
Table 6 – Encoding of variable normalised 2 octet .27
Table 7 – Attribute of variable normalised 4 Octet.27
Table 8 – Encoding of variable normalised 4 Octet .27
Table 9 – Attribute of unipolar 2 octet .28
Table 10 – Encoding of unipolar 2 octet .28
Table 11 – Attribute of Fixed point value 2 Octet.28
61158-5-14 © IEC:2010(E) – 3 –
Table 12 – Encoding of Fixed point value 2 Octet .29
Table 13 – Attribute of Fixed point value 4 Octet.29
Table 14 – Encoding of Bit sequence 2 Octet.29
Table 15 – Encoding of Nibble 4 Octet .30
Table 16 – Attribute of multiple time constant 2 octets .35
Table 17 – Attribute of multiple time constant 4 octets .35
Table 18 – Attribute of fraction time constant 2 octets.36
Table 19 – Encoding of reciprocal time constant 2 octets.36
Table 20 – Management object base.42
Table 21 – Access group assignment.56
Table 22 – Access rights assignment .57
Table 23 – Services for domain object .57
Table 24 – Service for report object .59
Table 25 – FAL management entity services.66
Table 26 – EM_DetectingDevice service parameters.67
Table 27 – EM_OnlineReply service parameters .68
Table 28 – EM_GetDeviceAttribute service parameters.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.