EN 62769-2:2015

Field Device Integration (FDI) - Part 2: FDI Client

IEC 62769-2:2015 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

Feldgeräteintegration (FDI) - Teil 2: FDI-Client

Intégration des appareils de terrain (FDI) - Partie 2: Client FDI

L'IEC 62769-2:2015 définit le client FDI. L'architecture FDI complète est présentée à la Figure 1. Les composants architecturaux relevant du domaine d'application du présent document ont été mis en évidence dans cette figure.

Naprave in združevanje v proizvodne sisteme - Vključitev procesne naprave (FDI) - 2. del: Odjemalec FDI (IEC 62769-2:2015)

Ta del standarda IEC 62769 določa odjemalca vključitve procesne naprave (FDI). Celotna arhitektura vključitve procesne naprave je prikazana na sliki 1. Arhitekturni sestavni deli, ki spadajo na področje uporabe tega dokumenta, so poudarjeni na tej sliki.

General Information

• Status: Withdrawn
• Publication Date: 25-Jun-2015
• Withdrawal Date: 15-Jun-2018
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100 - Open systems interconnection (OSI)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Mar-2024
• Completion Date: 12-Mar-2024
• Ref Project: SIST EN 62769-2:2015 - Devices and integration in enterprise systems; Field Device Integration - Part 2: FDI Client (IEC 62769-2:2015)

Relations

• Replaced By: EN IEC 62769-2:2021 - Field Device Integration (FDI) - Part 2: FDI Client
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2015
1DSUDYHLQ]GUXåHYDQMHYSURL]YRGQHVLVWHPH9NOMXþLWHYSURFHVQHQDSUDYH)',
GHO2GMHPDOHF)',,(&
Devices and integration in enterprise systems; Field Device Integration - Part 2: FDI
Client (IEC 62769-2:2015)
Feldgeräteintegration (FDI) - Teil 2: FDI-Client (IEC 62769-2:2015)
Intégration des appareils de terrain (FDI) - Partie 2: Client FDI (IEC 62769-2:2015)
Ta slovenski standard je istoveten z: EN 62769-2:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62769-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2015
ICS 25.040.40; 35.100
English Version
Field Device Integration (FDI) - Part 2: FDI Client
(IEC 62769-2:2015)
Intégration des appareils de terrain (FDI) - Partie 2: Client Feldgeräteintegration (FDI) - Teil 2: FDI-Client
FDI (IEC 62769-2:2015)
(IEC 62769-2:2015)
This European Standard was approved by CENELEC on 2015-06-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62769-2:2015 E
European foreword
The text of document 65E/345/CDV, future edition 1 of IEC 62769-2, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
62769-2:2015.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-03-16
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-06-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62769-2:2015 was approved by CENELEC as a European
Standard without any modification.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 62541-3 -  OPC unified architecture - Part 3: Address EN 62541-3 -
Space Model
IEC 62541-4 -  OPC Unified Architecture - Part 4: Services EN 62541-4 -
IEC 62769-1 -  Devices and integration in enterprise - -
systems; Field Device Integration - Part 1:
Overview
IEC 62769-3 -  Devices and integration in enterprise - -
systems; Field Device Integration - Part 3:
FDI Server
IEC 62769-4 2015 Devices and integration in enterprise - -
systems; Field Device Integration - Part 4:
FDI Packages
IEC 62769-5 -  Devices and integration in enterprise - -
systems; Field Device Integration - Part 5:
FDI Information Model
IEC 62769-6 2015 Devices and integration in enterprise - -
systems; Field Device Integration - Part6:
Technology Mapping
ISO 639 -  Code for the representation of names of - -
languages
ISO 3166 -  Codes for the representation of names of - -
countries
ISO/IEC 10918-1 -  Information technology; digital - -
compression and coding of continuous-
tone still images; requirements and
guidelines
ISO/IEC 15948 -  Information technology - Computer - -
graphics and image processing - Portable
Network Graphics (PNG) - Functional
specification
IEEE 754 -  IEEE Standard for Binary Floating-Point - -
Arithmetic
IETF RFC 2083 -  PNG (Portable Network Graphics) - - -
Specification Version 1.0
IETF RFC 3066 -  Tags for the Identification of Languages - -
XML-1 -  XML Schema Part 1: Structures, W3C - -
XML-2 -  XML Schema Part 2: Datatypes, W3C - -

IEC 62769-2 ®
Edition 1.0 2015-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field Device Integration (FDI) –

Part 2: FDI Client
Intégration des appareils de terrain (FDI) –

Partie 2: Client FDI
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100 ISBN 978-2-8322-2632-2

– 2 – IEC 62769-2:2015  IEC 2015
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms, definitions, abbreviated terms, acronyms and conventions . 14
3.1 Terms and definitions . 14
3.1.1 Terms used for Services . 14
3.1.2 Terms used for Device Access Services . 15
3.2 Abbreviated terms and acronyms . 15
3.3 Conventions . 15
4 Overview . 16
5 FDI Client . 17
5.1 Device Access Services . 17
5.1.1 General . 17
5.1.2 Device Model . 17
5.1.3 Node model . 19
5.1.4 Services . 23
5.1.5 Base Property Services . 27
5.1.6 Device Model Services . 28
5.1.7 Locking Services . 38
5.1.8 Direct Access Services . 40
5.1.9 Data types . 42
5.2 Hosting Services . 47
5.2.1 General . 47
5.2.2 Services . 47
5.2.3 Parameter Type Definitions . 53
6 UIP . 54
6.1 UIP Services . 54
6.1.1 Services . 54
6.1.2 Parameter type definitions . 58
6.2 UIP instantiation rules . 59
6.3 UIP state machine. 59
6.3.1 States . 59
6.3.2 State transitions . 60
6.4 UIP permissions . 60
6.5 UIP downloads from FDI Server . 61
7 Actions . 62
7.1 General . 62
7.2 Sequence diagram . 63
7.3 FDI Action schema definition. 66
8 User Interface Description (UID) . 67
8.1 Overview. 67
8.2 UID execution . 69
Annex A (normative) XML schema . 72
A.1 General . 72

IEC 62769-2:2015  IEC 2015 – 3 –
A.2 AbortRequestT . 72
A.3 AccessT . 72
A.4 AcknowledgementRequestT . 73
A.5 ActionListT . 73
A.6 AbortingNotificationT . 74
A.7 ActionRequestT . 74
A.8 ActionResponseT . 75
A.9 ActionT . 76
A.10 AxisListT . 76
A.11 AxisT . 76
A.12 BitEnumerationItemListT . 77
A.13 BitEnumerationItemT . 78
A.14 ButtonListT . 78
A.15 ChartT . 79
A.16 ChartTypeT .
...