EN 61158-3-14:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements
Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements
IEC 61158-3-14:2014 defines the services provided to the Type 14 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. The main changes are: - update the Communication model; - update the primitives and parameters of the DL-management service for FRT applications in 5.4.2; - correct the edit error; - update of the requirements for all conformance classes; - update of the requirements for all conformance services.
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-14: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 14-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-14: Définition des services de la couche liaison de données - Eléments de type 14
L'IEC 61158-3-14:2014 définit les services fournis à la couche application de bus de terrain Type 14 au niveau de la frontière entre les couches application et liaison de données du modèle de référence de bus de terrain et à la gestion des systèmes au niveau de la frontière entre la couche liaison de données et la gestion des systèmes selon le modèle de référence de bus de terrain. Cette troisième édition annule et remplace la deuxième édition parue en 2010. Cette édition constitue une révision technique. Les modifications sont: - mise à jour du modèle de communication; - mise à jour des primitives et des paramètres du service de gestion de DL pour les applications FRT en 5.4.2; - correction de l'erreur éditoriale; - mise à jour des exigences de l'ensemble des classes de conformité; - mise à jour des exigences de l'ensemble des services de conformité.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-14. del: Specifikacija protokola na ravni podatkovnih povezav - Elementi tipa 14 (IEC 61158-3-14:2014)
1.1 General
Ta del standarda IEC 61158 določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa na zunaj vidno opravilo, ki ga zagotavlja podatkovna povezovalna raven procesnih vodil tipa 14 v smislu
a) preprostih dejanj in dogodkov opravila;
b) parametrov, povezanih z vsakim preprostim dejanjem in dogodkom, ter obliko, ki jo prevzamejo; in
c) medsebojnih povezav med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji.
Namen tega standarda je določiti opravila, ki se zagotavljajo za
• aplikacijsko raven procesnih vodil tipa 14 na meji med aplikacijo in podatkovno povezovalno ravnjo referenčnega modela procesnega vodila;
• upravljanje sistemov na meji med podatkovno povezovalno ravnjo in upravljanjem sistemov referenčnega modela procesnega vodila.
1.2 Specifikacije
Glavni cilj tega standarda je določiti značilnosti konceptualnih opravil nivoja podatkovnih povezav, primernih za časovno kritične komunikacije, ter tako dopolniti osnovni referenčni model OSI
pri usmerjanju razvoja protokolov časovnih povezav za časovno kritične komunikacije. Drugotni cilj je zagotoviti načrte prehoda iz predhodno obstoječih industrijskih komunikacijskih protokolov. Ta specifikacija se lahko uporablja kot podlaga za formalne programske vmesnike podatkovne povezave. Vseeno ne gre za formalni programski vmesnik, pri čemer mora vsak tak vmesnik obravnavati izvedbena vprašanja, ki jih ta specifikacija ne zajema, vključno z:
a) velikostmi in oktetnim naročanjem različnih večoktetnih parametrov opravil;
b) korelacijo parnih primitivov za zahtevo in potrjevanje ali navedbo in odziv.
1.3 Skladnost
Ta standard ne določa posameznih implementacij ali izdelkov, ti pa ne omejujejo implementacije entitet podatkovnih povezav v okviru sistemov za industrijsko avtomatizacijo. Ta oprema ni skladna s standardom za specifikacijo protokola na ravni podatkovnih povezav. Skladnost se doseže prek implementacije ustreznega protokola podatkovnih povezav, ki izpolnjuje storitve ravni podatkovnih povezav tipa 14, ki je določen v tem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 61158-3-14:2012
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-14. del:
Specifikacija protokola na ravni podatkovnih povezav - Elementi tipa 14 (IEC 61158
-3-14:2014)
Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer
service definition - Type 14 elements (IEC 61158-3-14:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-14: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 14-Elemente (IEC 61158-3-14:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-14:
Définition des services de la couche liaison de données - Eléments de type 14 (CEI
61158-3-14:2014)
Ta slovenski standard je istoveten z: EN 61158-3-14:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-3-14
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-14:2012
English Version
Industrial communication networks - Fieldbus specifications -
Part 3-14: Data-link layer service definition - Type 14 elements
(IEC 61158-3-14:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 3-14:
bus de terrain - Partie 3-14: Définition des services de la Dienstfestlegungen des Data Link Layer
couche liaison de données - Eléments de type 14 (Sicherungsschicht) - Typ 14-Elemente
(CEI 61158-3-14:2014) (IEC 61158-3-14:2014)
This European Standard was approved by CENELEC on 2014-09-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-3-14:2014 E
Foreword
The text of document 65C/759/FDIS, future edition 3 of IEC 61158-3-14, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-14:2014.
The following dates are fixed:
(dop) 2015-06-17
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-17
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61158-3-14:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-3-14:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158-1 NOTE Harmonized as EN 61158-1.
IEC 61158-4-14 NOTE Harmonized as EN 61158-4-14.
IEC 61158-5-14 NOTE Harmonized as EN 61158-5-14.
IEC 61158-6-14 NOTE Harmonized as EN 61158-6-14.
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
- 3 - EN 61158-3-14:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61588 2009 Precision clock synchronization protocol for - -
networked measurement and control
systems
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 8802-3 - Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access
method and physical layer specifications
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
IETF RFC 768 - User Datagram Protocol - -
IETF RFC 791 - Internet Protocol - -
IETF RFC 793 - Transmission Control Protocol - -
IEC 61158-3-14 ®
Edition 3.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 3-14: Data-link layer service definition – Type 14 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 3-14: Définition des services de la couche liaison de données – Eléments
de type 14
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX S
ICS 25.040.40; 35.100.20; 35.110 ISBN 978-2-8322-1715-3
– 2 – IEC 61158-3-14:2014 © IEC 2014
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
1.1 General . 6
1.2 Specifications . 6
1.3 Conformance . 6
2 Normative references . 7
3 Terms, definitions, symbols, abbreviations and conventions . 7
3.1 Reference model terms and definitions . 7
3.2 Service convention terms and definitions . 9
3.3 Data-link service terms and definitions . 10
3.4 Symbols and abbreviations . 13
3.5 Common conventions . 15
4 DL service and concept . 16
4.1 General . 16
4.2 Services provided by the DLL . 17
5 DL-management services . 17
5.1 Overview . 17
5.2 Non-periodic data annunciation . 17
5.3 EndofNonPeriodicDataSendingAnnunciation service . 19
5.4 DL-management for FRT applications. 20
Bibliography . 22
Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses . 11
Figure 2 – Communication model . 16
Figure 3 – Sequence of non-periodic data annunciation service and end of non-
periodic data annunciation service . 18
Table 1 – Non-periodic data annunciation primitives and parameters . 18
Table 2 – EndofNonPeriodicDataSending service primitives and parameters . 19
Table 3 – DL-management service primitives and parameters. 20
IEC 61158-3-14:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 3-14: Data-link layer service definition –
Type 14 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.