EN 61300-3-14:2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator

This part of IEC 61300 provides a method to measure the accuracy and repeatability of the attenuation value settings of a variable attenuator used as a passive component.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-14: Untersuchungen und Messungen - Genauigkeit und Reproduzierbarkeit der Einstellung eines variablen Dämpfungsgliedes

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-14: Examens et mesures - Précision et répétabilité des positions d'affaiblissement d'un affaiblisseur variable

La présente partie de la CEI 61300 offre une méthode de mesure de la précision et de la répétabilité des positions de la valeur d'affaiblissement d'un affaiblisseur variable utilisé comme un composant passif.

Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 3-14. del: Preiskave in meritve – Točnost in ponovljivost nastavitev slabljenja spremenljivega atenuatorja (IEC 61300-3-14:2006)

General Information

• Status: Withdrawn
• Publication Date: 01-Feb-2007
• Withdrawal Date: 31-Oct-2009
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Nov-2015
• Completion Date: 14-Nov-2015
• Ref Project: SIST EN 61300-3-14:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator

Relations

• Replaces: EN 61300-3-14:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-3-14:2014 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-14:2007
01-september-2007
1DGRPHãþD
SIST EN 61300-3-14:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO3UHLVNDYHLQPHULWYH±7RþQRVWLQSRQRYOMLYRVWQDVWDYLWHY
VODEOMHQMDVSUHPHQOMLYHJDDWHQXDWRUMD,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and
repeatability of the attenuation settings of a variable attenuator (IEC 60794-4-14:2006 )
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-14: Untersuchungen und Messungen - Genauigkeit und
Reproduzierbarkeit der Einstellung eines variablen Dämpfungsgliedes (IEC 60794-4-
14:2006 )
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-14 : Examens et mesures - Précision
et répétabilité des positions d'affaiblissement d'un affaiblisseur variable (IEC 60794-4-
14:2006 )
Ta slovenski standard je istoveten z: EN 61300-3-14:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-14:2007 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-3-14

NORME EUROPÉENNE
February 2007
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-3-14:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-14: Examinations and measurements -
Accuracy and repeatability of the attenuation settings
of a variable attenuator
(IEC 61300-3-14:2006)

Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 3-14 : Examens et mesures - Teil 3-14: Untersuchungen
Précision et répétabilité des positions und Messungen -
d'affaiblissement d'un affaiblisseur Genauigkeit und Reproduzierbarkeit
variable der Einstellung eines variablen
(CEI 61300-3-14:2006) Dämpfungsgliedes
(IEC 61300-3-14:2006)


This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-14:2007 E

---------------------- Page: 2 ----------------------

EN 61300-3-14:2007 - 2 -
Foreword
The text of document 86B/2373/FDIS, future edition 2 of IEC 61300-3-14, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-14 on 2006-11-01.
This European Standard supersedes EN 61300-3-14:1997.
Specific technical changes from EN 61300-3-14:1997 include descriptions related to accuracy
considerations, launch conditions, the power meter, detailed measurement procedures and an example of
a test record.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-14:2006 was approved by CENELEC as a Europea
...