SIST EN 61300-3-14:2007
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator
This part of IEC 61300 provides a method to measure the accuracy and repeatability of the attenuation value settings of a variable attenuator used as a passive component.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-14: Untersuchungen und Messungen - Genauigkeit und Reproduzierbarkeit der Einstellung eines variablen Dämpfungsgliedes
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 3-14 : Examens et mesures - Précision et répétabilité des positions d'affaiblissement d'un affaiblisseur variable
La présente partie de la CEI 61300 offre une méthode de mesure de la précision et de la répétabilité des positions de la valeur d'affaiblissement d'un affaiblisseur variable utilisé comme un composant passif.
Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 3-14. del: Preiskave in meritve – Točnost in ponovljivost nastavitev slabljenja spremenljivega atenuatorja (IEC 61300-3-14:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61300-3-14:2007
01-september-2007
1DGRPHãþD
SIST EN 61300-3-14:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO 3UHLVNDYHLQPHULWYH±7RþQRVWLQSRQRYOMLYRVWQDVWDYLWHY
VODEOMHQMDVSUHPHQOMLYHJDDWHQXDWRUMD ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and
repeatability of the attenuation settings of a variable attenuator (IEC 60794-4-14:2006 )
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-14: Untersuchungen und Messungen - Genauigkeit und
Reproduzierbarkeit der Einstellung eines variablen Dämpfungsgliedes (IEC 60794-4-
14:2006 )
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-14 : Examens et mesures - Précision
et répétabilité des positions d'affaiblissement d'un affaiblisseur variable (IEC 60794-4-
14:2006 )
Ta slovenski standard je istoveten z: EN 61300-3-14:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-14:2007 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 61300-3-14
NORME EUROPÉENNE
February 2007
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-3-14:1997
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-14: Examinations and measurements -
Accuracy and repeatability of the attenuation settings
of a variable attenuator
(IEC 61300-3-14:2006)
Dispositifs d'interconnexion Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 3-14 : Examens et mesures - Teil 3-14: Untersuchungen
Précision et répétabilité des positions und Messungen -
d'affaiblissement d'un affaiblisseur Genauigkeit und Reproduzierbarkeit
variable der Einstellung eines variablen
(CEI 61300-3-14:2006) Dämpfungsgliedes
(IEC 61300-3-14:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-14:2007 E
---------------------- Page: 2 ----------------------
EN 61300-3-14:2007 - 2 -
Foreword
The text of document 86B/2373/FDIS, future edition 2 of IEC 61300-3-14, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-14 on 2006-11-01.
This European Standard supersedes EN 61300-3-14:1997.
Specific technical changes from EN 61300-3-14:1997 include descriptions related to accuracy
considerations, launch conditions, the power meter, detailed measurement procedures and an example of
a test record.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-14:2006 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61300-3-14:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61300-1 2003 Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE
IEC
61300-3-14
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-10
Dispositifs d’interconnexion et
composants passifs à fibres optiques –
Méthodes fondamentales d’essais et de mesures –
Partie 3-14:
Examens et mesures –
Précision et répétabilité des positions
d’affaiblissement d’un affaiblisseur variable
Fibre optic interconnecting
devices and passive components –
Basic test and measurement procedures –
Part 3-14:
Examinations and measurements –
Accuracy and repeatability of the attenuation
settings of a variable attenuator
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
61300-3-14 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5
1 Scope.9
2 Normative references.9
3 General description.9
3.1 Overview .9
3.2 Precautions and accuracy considerations.13
4 Apparatus.13
4.1 Launch conditions and source (S) .13
4.2 Excitation unit.15
4.3 Power meter (D) .15
4.4 Reference fibre (RF) and connector (R e R ) .15
A B
4.5 Temporary joint (TJ) .15
5 Procedure.17
5.1 Preconditioning.17
5.2 Measurement .17
6 Details to be specified.21
Annex A (informative) Example of sample test record .23
Figure 1 – Measured versus nominal attenuation .11
Figure 2 – Measurement set-up.17
Figure 3 – Device under test (DUT) configurations.19
Table 1 – Preferred source and launch conditions.13
---------------------- Page: 6 ----------------------
61300-3-14 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-14: Examinations and measurements –
Accuracy and repeatability of the attenuation settings
of a variable attenuator
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-3-14 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 1995. It constitutes a
technical revision. Specific technical changes since the first edition include descriptions related
to accuracy considerations, launch conditions, the power meter, detailed measurement
procedures and an example of a test reco
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.