EN 61290-1-1:2015
(Main)Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-1-1:2015(E) applies to all commercially available optical amplifiers (OAs) and optically amplified modules. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor OAs (SOAs) and planar optical waveguide amplifiers (POWAs). The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1: - nominal output signal power; - gain; - polarization-dependent gain; - maximum output signal power; - maximum total output power. The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series. This third edition cancels and replaces the second edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: updates on the characteristics of measurement apparatus and revised list of addressed optical amplifier parameters. Keywords: optical amplifiers, optical spectrum analyzer test, single-channel amplifiers
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-1: Optische Leistungs- und Verstärkungsparameter - Verfahren mit optischem Spektralanalysator
Amplificateurs optiques - Méthodes d'essai - Partie 1-1: Paramètres de puissance et de gain - Méthode de l'analyseur de spectre optique
L'IEC 61290-1-1:2015 s'applique à tous les amplificateurs optiques et modules à amplification optique disponibles sur le marché. Elle s'applique aux amplificateurs optiques utilisant des fibres pompées optiquement (OFA basés sur des fibres dopées aux terres rares ou sur l'effet Raman), des amplificateurs optiques à semiconducteurs (SOA) et des amplificateurs à guide d'onde optique planaire (POWA). L'objet de la présente norme est d'établir des exigences uniformes pour des mesurages précis et fiables, par le biais de la méthode d'essai de l'analyseur de spectre optique, des paramètres d'amplificateurs optiques donnés ci-dessous, tels qu'ils sont définis dans l'IEC 61291-1: - puissance nominale du signal de sortie; - gain; - gain dépendant de la polarisation; - puissance maximale du signal en sortie; - puissance totale maximale en sortie. L'objet de la présente norme est spécifiquement centré sur les amplificateurs à un seul canal. Pour les amplificateurs à canaux multiples, il convient de se reporter à la série IEC 61290-10. Cette troisième édition annule et remplace la deuxième édition parue en 2006 et constitue une révision technique. La présente édition contient les principales modifications techniques suivantes par rapport à l'édition précédente: mises à jour des caractéristiques de l'appareillage de mesure; révision de la liste des paramètres relatifs aux amplificateurs optiques traités. Mots clés: amplificateurs optiques, essai de l'analyseur de spectre optique, amplificateurs à un seul canal
Optični ojačevalniki - Preskusne metode - 1-1. del: Močnostni in ojačevalni parametri - Metoda z analizatorjem optičnega spektra (IEC 61290-1-1:2015)
Ta del standarda IEC 61290 se uporablja za vse komercialno dostopne optične ojačevalnike (OA) in optično ojačane module. Uporablja se za optične ojačevalnike z optično črpanimi vlakni (OFA, ki temeljijo na dopiranih vlaknih redke zemljine ali Ramanovem efektu), polprevodniške optične ojačevalnike (SOA) in ravninske optične valovodne ojačevalnike (POWA).
Cilj tega standarda je določiti enotne zahteve za točne in zanesljive meritve z uporabo preskusne metode z analizatorjem optičnega spektra, in sicer naslednjih parametrov optičnih ojačevalnikov, kot je določeno v standardu IEC 61291-1:
a) nazivne izhodne signalne moči;
b) ojačenja;
c) ojačenja, odvisnega od polarizacije;
d) največje izhodne signalne moči;
e) največje skupne izhodne moči.
OPOMBA: Vse številčne vrednosti, za katerimi je znak (‡), so predlagane vrednosti, za katere se zagotovi merjenje. Cilj tega standarda je obravnavati zlasti enokanalne ojačevalnike. Večkanalni ojačevalniki so obravnavani v skupini standardov IEC 61290-10 [1]2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
1DGRPHãþD
SIST EN 61290-1-1:2007
2SWLþQLRMDþHYDOQLNL3UHVNXVQHPHWRGHGHO 0RþQRVWQLLQRMDþHYDOQL
SDUDPHWUL0HWRGD]DQDOL]DWRUMHPRSWLþQHJDVSHNWUD ,(&
Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical
spectrum analyzer method (IEC 61290-1-1:2015)
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-1: Optische Leistungs- und
Verstärkungsparameter - Verfahren mit optischem Spektralanalysator (IEC 61290-1-
1:2015)
Amplificateurs optiques - Méthodes d'essai - Partie 1-1: Paramètres de puissance et de
gain - Méthode de l'analyseur de spectre optique (IEC 61290-1-1:2015)
Ta slovenski standard je istoveten z: EN 61290-1-1:2015
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61290-1-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 33.180.30 Supersedes EN 61290-1-1:2006
English Version
Optical amplifiers - Test methods - Part 1-1: Power and gain
parameters - Optical spectrum analyzer method
(IEC 61290-1-1:2015)
Amplificateurs optiques - Méthodes d'essai - Prüfverfahren für Lichtwellenleiter-Verstärker -
Partie 1-1: Paramètres de puissance et de gain - Méthode Teil 1-1: Optische Leistungs- und Verstärkungsparameter -
de l'analyseur de spectre optique Verfahren mit optischem Spektralanalysator
(IEC 61290-1-1:2015) (IEC 61290-1-1:2015)
This European Standard was approved by CENELEC on 2015-06-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61290-1-1:2015 E
European foreword
The text of document 86C/1309/FDIS, future edition 3 of IEC 61290-1-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61290-1-1:2015.
The following dates are fixed:
(dop) 2016-03-11
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-06-11
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61290-1-1:2006 and constitutes a technical revision.
edition:
a) updates on the characteristics of measurement apparatus;
b) revised list of addressed optical amplifier parameters.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61290-1-1:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61290-10 NOTE Harmonized in EN 61290-10 series (not modified).
IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61290-1 - Optical amplifiers - Test methods - EN 61290-1 -
Part 1: Power and gain parameters
IEC 61291-1 - Optical amplifiers - EN 61291-1 -
Part 1: Generic specification
IEC 61290-1-1 ®
Edition 3.0 2015-05
INTERNATIONAL
STANDARD
Optical amplifiers – Test methods –
Part 1-1: Power and gain parameters – Optical spectrum analyzer method
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.30 ISBN 978-2-8322-2669-8
– 2 – IEC 61290-1-1:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 5
3.1 Terms and definitions . 5
3.2 Abbreviations . 5
4 Apparatus . 6
5 Test sample . 8
6 Procedure . 8
7 Calculation . 9
8 Test results . 11
Bibliography . 12
Figure 1 – Typical arrangement of the optical spectrum analyzer test apparatus for
gain and power measurements . 6
IEC 61290-1-1:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL AMPLIFIERS – TEST METHODS –
Part 1-1: Power and gain parameters –
Optical spectrum analyzer method
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61290-1-1 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
This third edition cancels and replaces the second edition published in 2006 and constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) updates on the characteristics of measurement apparatus;
b) revised list of addressed optical amplifier parameters.
– 4 – IEC 61290-1-1:2015 © IEC 2015
The text of this standard is based on the following documents:
FDIS Report on voting
86C/1309/FDIS 86C/1328/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard shall be used in conjunction with IEC 61290-1 and IEC 61291-1.
A list of all parts of the IEC 61290 series, published under the general title Optical amplifiers –
Test methods can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date
—————————
The first editions of some of these parts were published under the general title Optical fibre amplifiers – Basic
specification or Optical amplifier test methods.
IEC 61290-1-1:2015 © IEC 2015 – 5 –
OPTICAL AMPLIFIERS – TEST METHODS –
Part 1-1: Power and gain parameters –
Optical spectrum analyzer method
1 Scope
This part of IEC 61290 applies to all commercially available optical amplifiers (OAs) and
optically amplified modules. It applies to OAs using optically pumped fibres (OFAs based on
either rare-earth doped fibres or on the Raman effect), semiconductor OAs (SOAs) and planar
optical waveguide amplifiers (POWAs).
The object of this standard is to establish uniform requirements for accurate and reliable
measurements, by means of the optical spectrum analyzer test method, of the following OA
parameters, as defined in IEC 61291-1:
a) nominal output signal power;
b) gain;
c) polarization-dependent gain;
d) maximum output signal power;
e) maximum total output power.
NOTE All numerical values followed by (‡) are suggested values for which the measurement is assured.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.