prEN IEC 61810-7-6:2023
(Main)Electrical relays - Tests and measurements - Part 6: Contact-circuit resistance (or voltage drop)
Electrical relays - Tests and measurements - Part 6: Contact-circuit resistance (or voltage drop)
Elektrische Relais - Prüfungen und Messungen - Teil 7-6: Durchgangswiderstand (oder Spannungsabfall)
Relais électriques - Essais et mesurages - Partie 6: Résistance (ou chute de tension) du circuit de contact
Električni releji - Preskusi in meritve - 7-6. del: Upornost kontaktnega tokokroga (ali napetostni padec)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61810-7-6:2023
01-november-2023
Električni releji - Preskusi in meritve - 7-6. del: Upornost kontaktnega tokokroga
(ali napetostni padec)
Electrical relays - Tests and Measurements - Part 7-6: Contact-circuit resistance (or
voltage drop)
Relais électriques - Essais et mesurages - Partie 7-6: Résistance (ou chute de tension)
du circuit de contact
Ta slovenski standard je istoveten z: prEN IEC 61810-7-6:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 61810-7-6:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61810-7-6:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61810-7-6:2023
94/943/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-6 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-09-08 2023-12-01
SUPERSEDES DOCUMENTS:
94/846/CD, 94/942/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me Countries” clauses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC claus es. (SEE
AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays - Tests and Measurements - Part 7-6: Contact-circuit resistance (or voltage drop)
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permis sion
in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61810-7-6:2023
94/943/CDV - 2 - IEC CDV 61810-7-6 © IEC: 2023
1 CONTENTS
2
3 FOREWORD . - 3 -
4 1 Scope . - 5 -
5 2 Normative references . - 5 -
6 3 Terms and definitions . - 5 -
7 4 Test procedure . - 5 -
8 4.1 Elementary relays . - 5 -
9 4.1.1 Purpose . - 5 -
10 4.1.2 Procedure . - 6 -
11 4.1.2.1 Measurement details . - 6 -
12 4.1.2.2 Test current and voltage . - 6 -
13 4.1.2.3 Measuring Cycles . - 7 -
14 4.1.2.3.1 Measurement with direct current . - 7 -
15 4.1.2.3.2 Measurement with alternating current . - 7 -
16 4.1.3 Conditions to be specified . - 7 -
17 4.2 Reed relay . - 8 -
18 4.2.1 Purpose .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.