EN 61753-131-3:2011
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
IEC 61753-131-3:2010(E) contains the minimum initial test and measurement requirements and severities which a mechanical fibre splice will satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in uncontrolled environments.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 131-3: Mechanische Spleiße für Einmoden-Lichtwellenleiter für die Kategorie U - Unkontrollierte Umgebung
Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 131-3 : Epissure mécanique de fibres unimodales pour Catégorie U - Environnement non contrôlé
La CEI 61753-131-3:2010 indique les exigences minimales sur les mesures et les essais initiaux ainsi que les sévérités qui seront satisfaites par une épissure mécanique de fibre pour que celle-ci soit classée comme satisfaisant aux exigences des épissures de fibres unimodales destinées à être utilisées dans des environnements non contrôlés.
Optični spojni elementi in pasivne komponente - Tehnični standard - 131-3. del: Enorodna mehanska optična spojnica za kategorijo U - Nenadzorovano okolje (IEC 61753-131-3:2010)
Ta del IEC 61753 vsebuje minimalne zahteve za preskus in merjenje ter natančnosti, ki jih mora izpolnjevati mehanska optična spojnica, da zadošča zahtevam za enorodovne optične spojnice za uporabo v nenadzorovanih okoljih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2011
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
(QRURGQDPHKDQVNDRSWLþQDVSRMQLFD]DNDWHJRULMR81HQDG]RURYDQRRNROMH ,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 131-3: Singlemode mechanical fibre splice for category U - Uncontrolled
environment (IEC 61753-131-3:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
131-3: Mechanische Spleiße für Einmoden-Lichtwellenleiter für die Kategorie U -
Unkontrollierte Umgebung (IEC 61753-131-3:2010)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 131-3 : Epissure mécanique de fibres unimodales pour Catégorie U
- Environnement non contrôlé (CEI 61753-131-3:2010)
Ta slovenski standard je istoveten z: EN 61753-131-3:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61753-131-3
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 131-3: Single-mode mechanical fibre splice for category U -
Uncontrolled environment
(IEC 61753-131-3:2010)
Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 131-3 : Epissure mécanique de Betriebsverhalten -
fibres unimodales pour Catégorie U - Teil 131-3: Mechanische Spleiße für
Environnement non contrôlé Einmoden-Lichtwellenleiter für die
(CEI 61753-131-3:2010) Kategorie U -
Unkontrollierte Umgebung
(IEC 61753-131-3:2010)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-131-3:2011 E
Foreword
The text of document 86B/2945/FDIS, future edition 1 of IEC 61753-131-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-131-3 on 2011-01-02.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-10-02
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-01-02
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-131-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-2-50:2008 NOTE Harmonized as EN 60793-2-50:2008 (not modified).
IEC 61753-1 NOTE Harmonized as EN 61753-1.
IEC 61300-2-46 NOTE Harmonized as EN 61300-2-46.
IEC 62005 series NOTE Harmonized in EN 62005 series (not modified).
__________
- 3 - EN 61753-131-3:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60721-3-2 - Classification of environmental conditions - EN 60721-3-2 -
Part 3: Classification of groups of
environmental parameters and
their severities -
Section 2: Transportation
IEC 61073-1 - Fibre optic interconnecting devices and EN 61073-1 -
passive components - Mechanical splices and
fusion splice protectors for optical fibres and
cables -
Part 1: Generic specification
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
Publication Year Title EN/HD Year
IEC 61300-2-22 - Basic test and measurement procedures - EN 61300-2-22 -
Part 2-22: Tests - Change of temperature
IEC 61300-2-26 - Fibre optic interconnecting devices and EN 61300-2-26 -
passive components - Basic test and
measurement procedures -
Part 2-26: Tests - Salt mist
IEC 61300-2-27 - Fibre optic interconnecting devices and EN 61300-2-27 -
passive components - Basic test and
measurement procedures -
Part 2-27: Tests - Dust - Laminar flow
IEC 61300-2-33 - Fibre optic interconnecting devices and EN 61300-2-33 -
passive components - Basic test and
measurement procedures -
Part 2-33: Tests - Assembly and disassembly
of fibre optic closures
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
IEC 61753-131-3 ®
Edition 1.0 2010-01
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 131-3: Single-mode mechanical fibre splice for category U – Uncontrolled
environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.20 ISBN 978-2-88910-564-9
– 2 – 61753-131-3 © IEC:2010(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references.6
3 General requirements .7
3.1 Storage, transportation and packaging .7
3.2 Marking and identification .7
3.3 Materials .7
3.4 Test report.8
4 Test.8
4.1 General .8
4.2 Test sample preparation .8
4.3 Test and measurement methods .8
4.4 Pass/fail criteria.9
5 Performance requirements.9
5.1 Sample size, sequencing and grouping .9
5.2 Dimensions .9
5.3 Installation yield requirement .9
5.4 Test details and requirements.9
Annex A (informative) Fibre type .16
Annex B (normative) Sample size and product sourcing requirements.17
Bibliography .18
Table 1 – Test details and requirements .9
Table A.1 – Fibre type characteristics.16
Table B.1 – Sample size per test .17
61753-131-3 © IEC:2010(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 131-3: Single-mode mechanical fibre splice for category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.