EN IEC 61784-1-16:2023

Industrial networks - Profiles - Part 1-16: Fieldbus profiles - Communication Profile Family 16

IEC 61784-1-16:2023 defines Communication Profile Family 16 (CPF 16). CPF 16 specifies a set of protocol specific communication profiles (CPs) based on the IEC 61158 series (Type 16 and Type 19) and other standards, to be used in the design of devices involved in communications in factory manufacturing and process control. NOTE 1 All CPs are based on standards or draft standards or International Standards published by the IEC or on standards or International Standards established by other standards bodies or open standards processes. NOTE 2 Some CPs of CPF 16 are specified in IEC 61784-2-16. Each CP selects an appropriate consistent and compatible subset of services and protocols from the relevant set that is defined and modelled in the IEC 61158 series. For the selected subset of services and protocols, the profile also describes any possible or necessary constraints in parameter values.

Industrielle Kommunikationsnetze - Profile - Teil 1-16: Feldbusprofile - Kommunikationsprofilfamilie (CPF) 16

Réseaux industriels -– Profils -– Partie 1-16: Profils de bus de terrain -– Famille de profils de communication 16

L’IEC 61784-1-16:2023 définit la famille de profils de communication 16 (CPF 16). La CPF 16 définit un jeu de profils de communication (CP) spécifiques au protocole, fondé sur la série IEC 61158 (type 16 et type 19) et d’autres normes, à utiliser pour la conception d’appareils employés en communication dans le cadre de la production industrielle et de la commande de processus. NOTE 1 Tous les CP sont fondés sur des normes, des projets de normes ou des Normes internationales publiées par l’IEC, ou bien sur des normes ou des Normes internationales établies par d’autres organismes de normalisation, ou encore sur des processus de normes ouvertes. NOTE 2 Certains CP de la CPF 16 sont spécifiés dans l’IEC 61784-2-16. Chaque CP sélectionne un sous-ensemble de services et de protocoles approprié, cohérent et compatible, à partir de l’ensemble du jeu pertinent défini et modélisé dans la série IEC 61158. Le profil décrit également, pour le sous-ensemble sélectionné de services et de protocoles, toute contrainte possible ou nécessaire au niveau des valeurs des paramètres.

Industrijska omrežja - Profili - 1-16. del: Profili procesnih vodil - Komunikacijski profil skupine 16 (IEC 61784-1-16:2023)

Standard IEC 61784-1-16:2023 določa družino komunikacijskih profilov 16 (CPF 16). Družina komunikacijskih profilov 16 določa sklop komunikacijskih profilov (CP), specifičnih za protokol, na osnovi skupine standardov IEC 61158 (tip 16 in tip 19) in drugih standardov, za uporabo pri oblikovanju naprav, vključenih v postopkih komunikacije v tovarniški proizvodnji in kontroli procesa.
OPOMBA 1: Vsi komunikacijski profili temeljijo na standardih ali osnutkih standardov ali mednarodnih standardih, ki jih je objavila komisija IEC, oziroma na standardih ali mednarodnih standardih, ki so jih določili drugi organi za standarde ali procesi odprtih standardov.
OPOMBA 2: Nekateri komunikacijski profili iz družine komunikacijskih profilov 16 so določeni v standardu IEC 61784-2-16.
Vsak komunikacijski profil izbere skladno in združljivo podskupino opravil ter protokolov iz ustreznega sklopa, ki je definiran in modeliran v skupini standardov IEC 61158. Za izbrane podskupine opravil in protokolov profil opisuje tudi morebitne potrebne ali nujne omejitve vrednosti parametrov.

General Information

• Status: Published
• Publication Date: 04-May-2023
• ICS: 35.100.20 - Data link layer
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 05-May-2023
• Completion Date: 05-May-2023
• Ref Project: SIST EN IEC 61784-1-16:2023 - Industrial networks - Profiles - Part 1-16: Fieldbus profiles - Communication Profile Family 16 (IEC 61784-1-16:2023)

Relations

• Splited From: EN IEC 61784-1:2019 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
• Effective Date: 25-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Industrijska omrežja - Profili - 1-16. del: Profili procesnih vodil - Komunikacijski
profil skupine 16 (IEC 61784-1-16:2023)
Industrial networks - Profiles - Part 1-16: Fieldbus profiles - Communication Profile
Family 16 (IEC 61784-1-16:2023)
Industrielle Kommunikationsnetze - Profile - Teil 1-16: Feldbusprofile -
Kommunikationsprofilfamilie (CPF) 16 (IEC 61784-1-16:2023)
Réseaux industriels - Profils - Partie 1-16: Profils de bus de terrain - Famille de profils de
communication 16 (IEC 61784-1-16:2023)
Ta slovenski standard je istoveten z: EN IEC 61784-1-16:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61784-1-16

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 35.100.20; 35.240.50 Supersedes EN IEC 61784-1:2019 (partially)
English Version
Industrial networks - Profiles - Part 1-16: Fieldbus profiles -
Communication Profile Family 16
(IEC 61784-1-16:2023)
Réseaux industriels - Profils - Partie 1-16: Profils de bus de Industrielle Kommunikationsnetze - Profile - Teil 1-16:
terrain - Famille de profils de communication 16 Feldbusprofile - Kommunikationsprofilfamilie (CPF) 16
(IEC 61784-1-16:2023) (IEC 61784-1-16:2023)
This European Standard was approved by CENELEC on 2023-04-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-1-16:2023 E

European foreword
The text of document 65C/1207/FDIS, future edition 1 of IEC 61784-1-16, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-1-
16:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-28
document have to be withdrawn
This document, together with other parts of the same series, partially supersedes EN IEC 61784-
1:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-1-16:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60793 (series) NOTE Approved as EN IEC 60793 (series)
IEC 61158-1 NOTE Approved as EN IEC 61158-1
IEC 61158-3 (series) NOTE Approved as EN 61158-3 (series)
IEC 61158-4 (series) NOTE Approved as EN 61158-4 (series)
IEC 61158-5 (series) NOTE Approved as EN 61158-5 (series)
IEC 61158-6 (series) NOTE Approved as EN 61158-6 (series)
IEC 61784-1 (series) NOTE Approved as EN IEC 61784-1 (series)
IEC 61784-2 (series) NOTE Approved as EN IEC 61784-2 (series)
IEC 61800-7-204 NOTE Approved as EN 61800-7-204
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61158 series Industrial communication networks - EN IEC 61158 series
Fieldbus specifications
IEC 61158-2 2023 Industrial communication networks - EN IEC 61158-2 2023
Fieldbus specifications - Part 2: Physical
layer specification and service definition
IEC 61158-3-16 2007 Industrial communication networks - EN 61158-3-16 2008
Fieldbus specifications - Part 3-16: Data-
link layer service definition - Type 16
elements
IEC 61158-3-19 2019 Industrial communication networks - EN IEC 61158-3-19 2019
Fieldbus specifications - Part 3-19: Data-
link layer service definition - Type 19
elements
IEC 61158-4-16 2007 Industrial communication networks - EN 61158-4-16 2008
Fieldbus specifications - Part 4-16: Data-
link layer protocol specification - Type 16
elements
IEC 61158-4-19 2019 Industrial communication networks - EN IEC 61158-4-19 2019
Fieldbus specifications - Part 4 -19: Data-
link layer protocol specification - Type 19
elements
IEC 61158-5-16 2007 Industrial communication networks - EN 61158-5-16 2008
Fieldbus specifications - Part 5-16:
Application layer service definition - Type
16 elements
IEC 61158-5-19 2019 Industrial communication networks - EN IEC 61158-5-19 2019
Fieldbus specifications - Part 5-19:
Application layer service definition - Type
19 elements
IEC 61158-6-16 2007 Industrial communication networks - EN 61158-6-16 2008
Fieldbus specifications - Part 6-16:
Application layer protocol specification -
Type 16 elements
IEC 61158-6-19 2019 Industrial communication networks - EN IEC 61158-6-19 2019
Fieldbus specifications - Part 6-19:
Application layer protocol specification -
Type 19 elements
IEC 61784-1-0 2023 Industrial networks - Profiles - Part 1-0: EN IEC 61784-1-0 2023
Fieldbus profiles - General concepts and
terminology
IEC 61784-2-16 2023 Industrial networks - Profiles - Part 2-16: - -
Additional real-time fieldbus profiles based
on ISO/IEC/IEEE 8802-3 - CPF 16
ISO/IEC/IEEE 8802-3 - Telecommunications and exchange - -
between information technology systems -
Requirements for local and metropolitan
area networks - Part 3: Standard for
Ethernet
IEC 61784-1-16 ®
Edition 1.0 2023-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 1-16: Fieldbus profiles – Communication Profile Family 16
Réseaux industriels – Profils –
Partie 1-16: Profils de bus de terrain – Famille de profils de communication 16
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 35.100.20; 35.240.50 ISBN 978-2-8322-6592-5
– 2 – IEC 61784-1-16:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms, symbols, and conventions . 7
3.1 Terms and definitions . 7
3.2 Abbreviations and symbols . 7
3.2.1 Common abbreviations and symbols . 7
3.2.2 Other abbreviations and symbols . 7
3.3 Conventions . 7
4 CPF 16 (SERCOS) . 8
4.1 General overview . 8
4.2 CP 16/1 (SERCOS I) . 8
4.2.1 Physical layer selection . 8
4.2.2 Data-link layer . 10
4.2.3 Application layer . 10
4.3 CP 16/2 (SERCOS II) . 10
4.3.1 Physical layer . 10
4.3.2 Data-link layer . 12
4.3.3 Application layer . 12
Annex A (informative) CPF 16 (SERCOS) communication concepts . 13
Bibliography . 15

Figure A.1 – Ring structure . 13
Figure A.2 – Topology example . 14

Table 1 – CP 16/1: PhL selection . 9
Table 2 – CP 16/1: DLL protocol selection . 10
Table 3 – CP 16/1: AL service selection . 10
Table 4 – CP 16/2: PhL selection . 11
Table A.1 – Number of devices per CP16/1 and CP16/2 systems (examples). 14

IEC 61784-1-16:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL NETWORKS –
PROFILES –
Part 1-16: Fieldbus profiles –
Communication Profile Family 16

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to
...