prEN IEC 63522-16:2023
(Main)Electrical relays - Tests and measurements - Part 16: Soldering
Electrical relays - Tests and measurements - Part 16: Soldering
Elektrische Relais – Mess- und Prüfverfahren – Teil 16: Löten
Relais électriques - Essais et mesurages - Partie 16: Brasage
Električni releji - Preskusi in meritve -16. del: Spajkanje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 63522-16:2024
01-februar-2024
Električni releji - Preskusi in meritve -16. del: Spajkanje
Electrical relays - Tests and measurements - Part 16: Soldering
Relais électriques - Essais et mesurages - Partie 16: Brasage
Ta slovenski standard je istoveten z: prEN IEC 63522-16:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 63522-16:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 63522-16:2024
---------------------- Page: 2 ----------------------
oSIST prEN IEC 63522-16:2024
94/965/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63522-16 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-11-17 2024-02-09
SUPERSEDES DOCUMENTS:
94/900/CD, 94/960/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING
NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses
to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC
clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays - Tests and Measurements - Part 16: Soldering
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
The project number was changed from 61810-7-16 to 63522-16 according to decision 23/04 taken at the TC 94
Plenary on September 15th 2023. See the 94/962/RM.
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 63522-16:2024
94/965/CDV – 2 – IEC CDV 63522-16 © IEC 2023
1 CONTENTS
2
3 FOREWORD .3
4 1 Scope .5
5 2 Normative references .5
6 3 Terms and definitions .5
7 4 Test procedure .6
8 4.1 Purpose .6
9 4.2 Procedure .6
10 Resistance to soldering heat .6
11 Resistance to standard industrial soldering processes .7
12 Solderability, wetting – Wetting balanced method .9
13 4.3 Conditions . 10
14 5 Evaluation . 10
15 Annex T (informative) Test report . 11
16 Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.