EN 61290-1-3:2005
(Main)Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
This International Standard applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped fibres (OFA based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOA), and waveguides (POWA).
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-3: Optische Leistungs- und Verstärkerparameter - Verfahren mit optischem Leistungsmesser
Amplificateurs optiques - Méthodes d'essai - Partie 1-3: Paramètres de puissance et de gain - Méthode du wattmètre optique
La présente partie de la CEI 61290 s'applique à tous les amplificateurs optiques (AO) et sous-systèmes à amplification optique, disponibles sur le marché. Elle s'applique aux AO utilisant des fibres pompées optiquement (AFO basé sur des fibres dopées aux terres rares ou sur l'effet Raman), des semiconducteurs (SOA), et des guides d'ondes (POWA).
Optični ojačevalniki – Preskusne metode – 1-3. del: Parametri moči in ojačenja – Metoda z merilnikom optične moči (EC 61290-1-3:2005)
General Information
Relations
Standards Content (Sample)
STANDARDOptični ojačevalniki – Preskusne metode – 1-3. del: Parametri moči in ojačenja – Metoda z merilnikom optične moči (EC 61290-1-3:2005)Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (EC 61290-1-3:2005)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61290-1-3:2006(en)ICS33.180.30
EUROPEAN STANDARD
EN 61290-1-3 NORME EUROPÉENNE EUROPÄISCHE NORM
December 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61290-1-3:2005 E
ICS 33.180.30 Supersedes EN 61290-1-3:1998
English version
Optical amplifiers -
Test methods Part 1-3: Power and gain parameters -
Optical power meter method (IEC 61290-1-3:2005)
Amplificateurs optiques -
Méthodes d'essai Partie 1-3: Paramètres de puissance optique et de gain -
Méthode du wattmètre optique (CEI 61290-1-3:2005)
Prüfverfahren
für Lichtwellenleiter-Verstärker Teil 1-3: Optische Leistungs-
und Verstärkerparameter -
Verfahren mit optischem
Leistungsmesser (IEC 61290-1-3:2005)
This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
b) the applicability has been extended to all commercially available optical amplifiers – not just optical fibre amplifiers. This standard is to be read in conjunction with EN 61291-1. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-10-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61290-1-3:2005 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1:2003 (not modified). IEC 60825-1 NOTE Harmonized as EN 60825-1:1994 (not modified). IEC 60825-2 NOTE Harmonized as EN 60825-2:2004 (not modified). IEC 60874-1 NOTE Harmonized as EN 60874-1:1999 (not modified). IEC 61290-10-1 NOTE Harmonized as EN 61290-10-1:2003 (not modified). IEC 61290-10-2 NOTE Harmonized as EN 61290-10-2:2003 (not modified). IEC 61290-10-3 NOTE Harmonized as EN 61290-10-3:2003 (not modified). __________
- 3 - EN 61290-1-3:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-1-40 (mod) - 1) Optical fibres Part 1-40: Measurement methods and test procedures – Attenuation
EN 60793-1-40 2003 2) IEC 61291-1 - 3) Optical fibre amplifiers Part 1: Generic specification EN 61291-1 - 3)
1) Undated reference.
2) Valid edition at date of issue.
3) To be published.
NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61290-1-3Deuxième éditionSecond edition2005-11 Amplificateurs optiques – Méthodes d'essai – Partie 1-3: Paramètres de puissance et de gain – Méthode du wattmètre optique
Optical amplifiers – Test methods – Part 1-3: Power and gain parameters – Optical power meter method
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés
Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE R Commission Electrotechnique InternationaleInternational Electrotechnical Commission
61290-1-3 IEC:2005 – 3 –
CONTENTS
FOREWORD.5 INTRODUCTION.11
1 Scope and object.13 2 Normative references.15 3 Acronyms and abbreviations.15 4 Apparatus.15 5 Test sample.21 6 Procedure.21 7 Calculation.25 8 Test results.29
Annex A (informative)
Optimization of optical bandpass filter spectral width.35
Bibliography.37
61290-1-3 IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
OPTICAL AMPLIFIERS – TEST METHODS –
Part 1-3: Power and gain parameters – Optical power meter method
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61290-1-3 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 1998. It is a technical revision that includes the following significant changes. a) Optical power and gain parameters are both included in this revision. Therefore, International Standard IEC 61290-2-1 has been withdrawn. b) The applicability has been extended to all commercially available optical amplifiers – not just optical fiber amplifiers. This standard shall be read in conjunction with IEC 61291-1.
61290-1-3 IEC:2005 – 7 –
The text of this standard is based on the following documents: FDIS Report on voting 86C/673/FDIS 86C/678/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. IEC 61290 consists of the following parts under the general title Optical amplifiers – Test methods:1) Part 1-1: Test methods for gain parameters – Optical spectrum analyzer Part 1-2:
Power and gain parameters – Electrical spectrum analyzer method Part 1-3:
Power and gain parameters – Optical power meter method Part 2-1:
Test methods for optical power parameters – Optical spectrum analyzer Part 2-2:
Test methods for optical power parameters – Electrical spectrum analyzer Part 2-3:
Test methods for optical power parameters – Optical power meter Part 3:
Test methods for noise figure parameters Part 3-1:
Noise figure parameters – Optical spectrum analyzer method Part 3-2:
Test methods for noise figure parameters – Electrical spectrum analyzer method Part 5-1:
Test methods for reflectance parameters – Optical spectrum analyser Part 5-2:
Reflectance parameters – Electrical spectrum analyser method Part 5-3:
Test methods for reflectance parameters – Reflectance tolerance using electrical spectrum analyser Part 6-1:
Test methods for pump leakage parameters – Optical demultiplexer Part 7-1:
Test methods for out-of-band insertion losses – Filtered optical power meter Part 10-1:
Multi-channel parameters – Pulse method using an optical switch and optical spectrum analyzer Part 10-2:
Multi-channel parameters – Pulse method using a gated optical spectrum analyzer Part 10-3:
Multi-channel parameters – Probe methods Part 11-1:
Polarization mode dispersion – Jones matrix eigenanalysis method (JME) Part 11-2 : Polarization mode dispersion parameter – Poincaré sphere analysis metho
————————— 1) The first editions of some of these parts were published under the general title Optical fibre amplifiers – Basic specification or Optical amplifier test methods.
61290-1-3 IEC:2005 – 9 –
The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
61290-1-3 IEC:2005 – 11 –
INTRODUCTION This International Standard is devoted to the subject of optical amplifiers. The technology of optical amplifiers is still rapidly evolving, hence amendments and new editions to this standard can be expected. Each abbreviation introduced in this International Standard is explained in the text at least the first time it appears. However, for an easier understanding of the whole text, a list of all abbreviations used in this International Standard is given in Clause 3.
61290-1-3 IEC:2005 – 13 –
OPTICAL AMPLIFIERS – TEST METHODS –
Part 1-3: Power and gain parameters – Optical power meter method
1 Scope and object This International Standard applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.