EN IEC 62604-1:2022

Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification

IEC 62604-1:2022 is available as IEC 62604-1:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62604-1:2022 specifies the methods of test and general requirements for SAW and BAW duplexers of assessed quality using either capability approval or qualification approval procedures. This edition includes the following significant technical changes with respect to the previous edition: - the term "multiplexer" has been added to Clause 3. NOTE In this document, SAW and BAW duplexers are treated simultaneously because both duplexers are used in the same manner especially in mobile phones and have the same requirements of characteristics, test method and so on.

Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-)Duplexer mit bewerteter Qualität – Teil 1: Fachgrundspezifikation

Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de volume (OAV) sous assurance de la qualité - Partie 1: Spécification générique

IEC 62604-1:2022 est disponible sous forme de IEC 62604-1:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 62604-1:2022 spécifie les méthodes d’essai et les exigences générales pour les duplexeurs à OAS et à OAV dont la qualité est assurée par les procédures d’agrément de savoir-faire ou par les procédures d’homologation. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - ajout du terme "multiplexeur" à l’Article 3. NOTE Dans le présent document, les duplexeurs à OAS et à OAV sont traités simultanément, car ces deux duplexeurs sont utilisés de la même manière, en particulier dans les téléphones mobiles; ils ont en outre les mêmes exigences de caractéristiques, de méthode d’essai, etc.

Radiofrekvenčni (SAW) in visokofrekvenčni (BAW) duplekserji ocenjene kakovosti - 1. del: Splošna specifikacija (IEC 62604-1:2022)

Ta del standarda IEC 62604 določa preskusne metode in splošne zahteve za radiofrekvenčne (SAW) in visokofrekvenčne (BAW) duplekserje ocenjene kakovosti, ki vključujejo postopke za odobritev zmogljivosti ali kvalifikacije.

General Information

• Status: Published
• Publication Date: 01-Sep-2022
• ICS: 31.140 - Piezoelectric devices
• Technical Committee: CLC/SR 49 - Piezoelectric and dielectric devices for frequency control and selection
• Drafting Committee: IEC/TC 49 - IEC_TC_49
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 02-Sep-2022
• Completion Date: 02-Sep-2022
• Ref Project: SIST EN IEC 62604-1:2022 - Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification (IEC 62604-1:2022)

Relations

• Replaces: EN 62604-1:2015 - Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
• Effective Date: 06-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62604-1:2022
01-november-2022
Nadomešča:
SIST EN 62604-1:2015
Radiofrekvenčni (SAW) in visokofrekvenčni (BAW) duplekserji ocenjene kakovosti
- 1. del: Splošna specifikacija (IEC 62604-1:2022)
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed
quality - Part 1: Generic specification (IEC 62604-1:2022)
Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-)Duplexer mit bewerteter Qualität
– Teil 1: Fachgrundspezifikation (IEC 62604-1:2022)
Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de volume
(OAV) sous assurance de la qualité - Partie 1: Spécification générique (IEC 62604-
1:2022)
Ta slovenski standard je istoveten z: EN IEC 62604-1:2022
ICS:
31.140 Piezoelektrične naprave Piezoelectric devices
SIST EN IEC 62604-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62604-1:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 62604-1:2022


EUROPEAN STANDARD EN IEC 62604-1

NORME EUROPÉENNE

EUROPÄISCHE NORM September 2022
ICS 31.140 Supersedes EN 62604-1:2015
English Version
Surface acoustic wave (SAW) and bulk acoustic wave (BAW)
duplexers of assessed quality - Part 1: Generic specification
(IEC 62604-1:2022)
Duplexeurs à ondes acoustiques de surface (OAS) et à Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-
ondes acoustiques de volume (OAV) sous assurance de la )Duplexer mit bewerteter Qualität - Teil 1:
qualité - Partie 1: Spécification générique Fachgrundspezifikation
(IEC 62604-1:2022) (IEC 62604-1:2022)
This European Standard was approved by CENELEC on 2022-08-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62604-1:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62604-1:2022
EN IEC 62604-1:2022 (E)
European foreword
The text of document 49/1360/CDV, future edition 2 of IEC 62604-1, prepared by IEC/TC 49
"Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control,
selection and detection" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62604-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-05-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-08-15
document have to be withdrawn

This document supersedes EN 62604-1:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62604-1:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62047-7:2011 NOTE Harmonized as EN 62047-7:2011 (not modified)
IEC 60068-2-10:2005 NOTE Harmonized as EN 60068-2-10:2005 (not modified)
IEC 62604-2:2017 NOTE Harmonized as EN IEC 62604-2:2018 (not modified)
IEC 60862-1:2015 NOTE Harmonized as EN 60862-1:2015
...