Energy Management system application program interface (EMS-API) – Part 457: Dynamics profile

IEC 61970-457:2021 specifies a standard interface for exchanging dynamic model information needed to support the analysis of the steady state stability (small-signal stability) and/or transient stability of a power system or parts of it. The schema(s) for expressing the dynamic model information are derived directly from the CIM, more specifically from IEC 61970-302. The scope of this document includes only the dynamic model information that needs to be exchanged as part of a dynamic study, namely the type, description and parameters of each control equipment associated with a piece of power system equipment included in the steady state solution of a complete power system network model. Therefore, this profile is dependent upon other standard profiles for the equipment as specified in IEC 61970-452, CIM static transmission network model profiles, the topology, the steady state hypothesis and the steady-state solution (as specified in IEC 61970-456, Solved power system state profiles) of the power system, which bounds the scope of the exchange. The profile information described by this document needs to be exchanged in conjunction with IEC 61970-452 and IEC 61970-456 profiles’ information to support the data requirements of transient analysis tools. IEC 61970 456 provides a detailed description of how different profile standards can be combined to form various types of power system network model exchanges. This document supports the exchange of the following types of dynamic models: • standard models: a simplified approach to exchange, where models are contained in predefined libraries of classes interconnected in a standard manner that represent dynamic behaviour of elements of the power system. The exchange only indicates the name of the model along with the attributes needed to describe its behaviour. • proprietary user-defined models: an exchange that would provide users the ability to exchange the parameters of a model representing a vendor or user proprietary device where an explicit description of the model is not described in this document. The connections between the proprietary models and standard models are the same as described for the standard models exchange. Recipient of the data exchange will need to contact the sender for the behavioural details of the model. This document builds on IEC 61970-302, CIM for dynamics which defines the descriptions of the standard dynamic models, their function block diagrams, and how they are interconnected and associated with the static network model. This type of model information is assumed to be pre-stored by all software applications hence it is not necessary to be exchanged in real-time or as part of a dynamics model exchange.

Schnittstelle für Anwendungsprogramme für Netzführungssysteme - Teil 457: Profile zu Dynamiken

Interface de programmation d'application pour système de gestion d'énergie (EMS-API) - Partie 457: Profil de régime dynamique

IEC 61970-457:2021 spécifie une interface normalisée pour l’échange des informations de modèles de régimes dynamiques, nécessaires pour soutenir l’analyse de la stabilité en régime établi (stabilité en petits signaux) et/ou la stabilité transitoire d’un système électrique ou des parties de celui-ci. Le ou les schémas d’expression des informations de modèles de régimes dynamiques sont déduits directement du CIM, plus spécifiquement de l’IEC 61970-302. Le domaine d’application du présent document inclut uniquement les informations des modèles de régimes dynamiques qu’il est nécessaire d’échanger comme partie intégrante d’une étude des régimes dynamiques, à savoir le type, la description et les paramètres de chaque équipement de commande associé à un équipement de système électrique inclus dans la solution permanente d’un modèle complet de réseau électrique. Par conséquent, ce profil dépend des autres profils normalisés pour les équipements comme cela est spécifié dans l’IEC 61970-452: Profils du modèle de réseau de transport statique CIM, la topologie, l’hypothèse en régime établi et la solution en régime établi (comme cela est spécifié dans l'IEC 61970-456: Profils d'état de réseaux électriques résolus) du système électrique, ce qui limite la portée de l’échange. Il est nécessaire d’échanger les informations de profils décrites par le présent document conjointement avec les informations de profils spécifiées dans l’IEC 61970-452 et l’IEC 61970-456 afin de venir à l’appui des exigences relatives aux données des outils d’analyse transitoire. L’IEC 61970-456 donne une description détaillée du mode selon lequel les différentes normes de profils peuvent être combinées afin de former différents types d’échanges de modèles de réseaux électriques. Le présent document soutient l’échange des types suivants de modèles de régimes dynamiques: • modèles normalisés: une approche simplifiée d’échange, avec laquelle les modèles sont contenus dans des bibliothèques prédéfinies de classes interconnectées de manière normalisée, qui représentent le comportement dynamique des éléments du système électrique. L’échange indique uniquement le nom du modèle, ainsi que les attributs nécessaires pour décrire son comportement; • modèles définis par l'utilisateur propriétaires: échange qui donne la possibilité aux utilisateurs d’échanger les paramètres d’un modèle qui représente le dispositif propriétaire d’un fournisseur ou d’un utilisateur, lorsque le présent document ne donne pas de description explicite du modèle. Les connexions entre les modèles propriétaires et les modèles normalisés sont les mêmes que celles décrites pour l’échange de modèles normalisés. Il est nécessaire que le destinataire de l’échange de données contacte l’émetteur afin d’obtenir les informations détaillées du comportement du modèle. La structure du présent document suit le CIM pour régimes dynamiques de l’IEC 61970-302, qui définit les descriptions des modèles de régimes dynamiques normalisés et de leurs diagrammes de blocs fonctionnels, ainsi que leur mode d'interconnexion et d’association avec le modèle de réseau statique. Par hypothèse, ce type d’information de modèle est considéré comme prémémorisé par toutes les applications logicielles et il n’est ainsi pas nécessaire de l'échanger en temps réel ou comme partie intégrante d’un échange de modèles de régimes dynamiques.

Aplikacijski programski vmesnik za sistem upravljanja z energijo (EMS-API) - 457. del: Dinamični profil

General Information

Status
Published
Publication Date
29-Apr-2021
Current Stage
6060 - Document made available - Publishing
Start Date
30-Apr-2021
Due Date
18-Dec-2020
Completion Date
30-Apr-2021

Relations

Buy Standard

Standard
EN IEC 61970-457:2021 - BARVE
English language
460 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Aplikacijski programski vmesnik za sistem upravljanja z energijo (EMS-API) - 457.
del: Dinamični profil
Energy Management System Application Program Interface (EMS-API) – Part 457:
Dynamics profile
Ta slovenski standard je istoveten z: EN IEC 61970-457:2021
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61970-457

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 33.200
English Version
Energy Management system application program interface
(EMS-API) - Part 457: Dynamics profile
(IEC 61970-457:2021)
Interface de programmation d'application pour système de Schnittstelle für Anwendungsprogramme für
gestion d'énergie (EMS-API) - Partie 457: Profil de régime Netzführungssysteme - Teil 457: Profile zu Dynamiken
dynamique (IEC 61970-457:2021)
(IEC 61970-457:2021)
This European Standard was approved by CENELEC on 2021-04-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61970-457:2021 E

European foreword
The text of document 57/2331/FDIS, future edition 1 of IEC 61970-457, prepared by IEC/TC 57
"Power systems management and associated information exchange" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61970-457:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-01-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-20
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61970-457:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61400-27-1:2020 NOTE Harmonized as EN IEC 61400-27-1:2020 (not modified)
IEC 61970-552:2016 NOTE Harmonized as EN 61970-552:2016 (not modified)
IEC 61970-501:2006 NOTE Harmonized as EN 61970-501:2006 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61970-301 2020 Energy management system application EN IEC 61970-301 2020
program interface (EMS-API) - Part 301:
Common information model (CIM) base
IEC 61970-302 2018 Energy management system application EN IEC 61970-302 2018
program interface (EMS-API) - Part 302:
Common information model (CIM)
dynamics
IEC 61970-452 2017 Energy management system application EN 61970-452 2017
program interface (EMS-API) - Part 452:
CIM static transmission network model
profiles
IEC 61970-456 2018 Energy management system application EN IEC 61970-456 2018
program interface (EMS-API) - Part 456:
Solved power system state profiles

IEC 61970-457 ®
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
colour
inside
Energy management system application program interface (EMS-API) –

Part 457: Dynamics profile
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.200 ISBN 978-2-8322-9421-5

– 2 – IEC 61970-457:2021 © IEC 2021
CONTENTS
FOREWORD . 22
INTRODUCTION . 24
1 Scope . 25
2 Normative references . 25
3 Terms and definitions . 26
4 Profile specification . 26
4.1 General . 26
4.2 Requirements and constraints . 26
5 Overview . 29
6 Use cases . 30
6.1 General . 30
6.2 Dynamic assessment studies . 30
7 Architecture . 31
7.1 General . 31
7.2 Profile architecture . 32
8 Detailed profile specification . 34
8.1 General . 34
8.2 Package DynamicsProfile . 35
8.2.1 General . 35
8.2.2 (abstract) DynamicsProfileVersion root class . 35
8.2.3 Package Base . 35
8.2.4 Package Dynamics . 64
Annex A (normative) Implementation clarifications related to the models inherited from
RotatingMachineDynamics class . 444
Annex B (informative) Examples using IEC 61970-552 serialisation . 446
B.1 Overview. 446
B.2 Standard models . 446
B.3 User-defined models . 450
Bibliography . 457

Figure 1 – SynchronousMachineDynamics association . 32
Figure 2 – Interconnection diagram for a synchronous machine . 32
Figure 3 – Standard connections for a synchronous machine . 33
Figure 4 – Profile relationships . 34
Figure 5 – Class diagram Domain::Primitives . 36
Figure 6 – Class diagram Domain::DataTypes . 36
Figure 7 – Class diagram Domain::Enumerations . 37
Figure 8 – Class diagram Core::Core . 55
Figure 9 – Class diagram Wires::Wires . 59
Figure 10 – StandardInterconnectionSynchronousMachine . 65
Figure 11 – StandardInterconnectionSynchronousGeneratorCrossCompound . 66
Figure 12 – StandardInterconnectionAsynchronousMachine . 67
Figure 13 – StandardInterconnectionWindTurbineType1Aand1B . 68
Figure 14 – StandardInterconnectionWindTurbineType2 . 69

IEC 61970-457:2021 © IEC 2021 – 3 –
Figure 15 – StandardInterconnectionWindTurbineType3 . 70
Figure 16 – StandardInterconnectionWindTurbineType4Aand4B . 71
Figure 17 – StandardInterconnectionSingleLoad . 72
Figure 18 – Class diagram StandardInterconnections::
StandardSynchronousMachineInterconnection . 73
Figure 19 – Class diagram StandardInterconnections::
StandardAsynchronousMachineInterconnection . 74
Figure 20 – Class diagram StandardInterconnections::
StandardWindType1and2Interconnection . 75
Figure 21 – Class diagram StandardInterconnections::
StandardWindType3and4Interconnection . 76
Figure 22 – Class diagram StandardInterconnections::StandardLoadInterconnection . 77
Figure 23 – Class diagram StandardInterconnections::StandardHVDCInterconnection . 78
Figure 24 – Class diagram StandardInterconnections::
StandardStaticVarCompensatorInterconnection . 78
Figure 25 – SynchronousGeneratorInterconnectionAndVariables . 81
Figure 26 – SynchronousMotorInterconnectionAndVariables . 82
Figure 27 – Class diagram SynchronousMachineDynamics::
SynchronousMachineDynamics . 83
Figure 28 – SynchronousMachineSaturationParameters . 84
Figure 29 – SynchronousGeneratorMechanicalEquation . 85
Figure 30 – SynchronousMotorMechanicalEquation . 86
Figure 31 – SynchronousGeneratorPhasor . 87
Figure 32 – SynchronousMotorPhasor . 88
Figure 33 – Simplified . 89
Figure 34 – SubtransientRoundRotor . 93
Figure 35 – SubtransientSalientPole . 94
Figure 36 – SubtransientTypeF . 95
Figure 37 – SubtransientTypeJ . 9
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.